Lumary Remote Control User Guide
- June 3, 2024
- Lumary
Table of Contents
Lumary Remote Control User Guide
Overview
On/Off” button
Master Switch Note:
In the case of multiple groups, the “On/Off” key is the main control key, and
on and off is to switch on and off all devices under the remote control. Short
pressing the key the control device light to turn on, and short pressing again
the button the control device light to turn off. After the network is
distributed, the initial state is closed.
Night Light
Color Temperature:
2700 k 2. Brightness: 5% Note: Short press button to adjust the lamp to the
default brightness color temperature, long press button does not work.
Scene
Note: Each short pressing to switch a scenario, the scenario for our default Goodnight – Working – reading -Leisure – Soft – Colorful – Dazzling – Splendid.
RGB
Note: Short pressing the button once to change a color, color to “red- orange-yellow-green-cyan-blue-violet” cycle.
Brightness+
Brightness:
1% – 20% – 40% – 60% – 80% -100%
Note: One-button group control lights brightness, short pressing button
to step-by-step regulation (all devices, from the current state to adjust the
brightness, brightness may not be consistent), long press button stepless
dimming.
Brightness-
Brightness:
100%-80%-60%-40%-20%-1% Note:One-button group control lights brightness, short
pressing button to step-by-step adjustment (all devices, from the current
state to adjust the brightness, brightness may not be consistent), long press
button stepless dimming.
K+
2700K-3500K-4500K-5000K-5700K-6500K
Note: One-button group control lights color temperature, short pressing
button step-by-step adjustment (all devices, color temperature adjustment from
the current state, the brightness may not be consistent), long pressing button
stepless color adjustment, (switch to white light mode when using the color
temperature button).
K –
6500K-5700K-5000K-4500K-3500K-2700K
Note: One-button group control lights color temperature, short pressing
button step-by-step adjustment (all devices, color temperature adjustment from
the current state, the brightness may not be consistent), long pressing button
stepless color adjustment, (switch to white light mode when using the color
temperature button).
Group
- Short press: short press to turn on/off each group.
- Long press: long press to bind to each group.
- Long press: ‘group button” and “brightness-” key combination, unbind the group.
Note: You need to press the group key first when you need group control, and then operate the brightness/color temperature/color light/scene and other function keys to control.
Binding instructions.
- Reboot the device once through the physical switch, the device is in configuration mode within 30S (Note: The device needs to be added to the application with the network first.)
- Long press Group A: Until the lamps appear blinking, indicating that the lights have been configured, if the required lights are not blinking during the configuration process, you need to re-long press the group group until all devices are bound, if the timeout you can repeat the above operation. Other group binding methods are the same.
- The use of the remote control is a requirement for the product, not applicable to all our products, in order to be compatible with the adaptation, we have chosen the set + remote control program, you can follow the set of links to buy equipment, if the feedback is good, we will open the sale of separate remote control;. 4The remote control is powered by 2xAAA batteries.
- If the product has use problems please contact us, we will do guidance instructions for you. support@lumary.tech
Can’t connect? Need help?
WE CAN HELP
HAVING AN EASY TALK TO US BEFORE YOU RETURN THE PRODUCT WILL FIX A PROBLEM MORE QUICKLY
Lumary support:
support@Lumary.tech
Visit us at: www.Iumary.tech