KRAMER KT-107 7 Inch Wall Table Mount PoE Touch Panel User Guide

: June 5, 2024
: Kramer

Table of Contents

**Wall Table Mount PoE Touch Panel
Technical Specifications:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KT-107 7 Inch Wall Table Mount PoE Touch Panel
User Guidehttps://goo.gl/imozSz

**Wall Table Mount PoE Touch Panel

**

KT-107 Quick Start Guide
This guide helps you install and use your KT-107 for the first time.
Go to www.kramerav.com/downloads/KT-107 to download the latest user manual and check if firmware upgrades are available.

Step 1: Check what’s in the box

KT-107 Touch Panel
AC/DC adapter
Tabletop mount
Installation screws
On-wall mount unit
Panel mount plate
1 Quick start guide
1 C-USB/Micro B cable
1 right-angle OTG USB cable

Step 2: Get to know your KT-107

#	Feature	Function
1	Hidden Reset Button	Located on top-side. Insert a pin and hold for a few

seconds to reset KT-107.
2| Light Sensor| Automatically adjusts the screen brightness according to the room lighting conditions.
3| Activity RGB LED| Lights green when powered, flashes green when charging the battery, and lights red when the camera is on.
4| Camera| For remote room viewing or video conferencing.
5| Microphone| For audio communication, recording or conferencing.
6| Speakers| To output the sound.
7| Control Button| Press and hold (for 2 seconds) to open the pop-up menu which lets you power down the unit, reboot it or return to the home page. The Control button is password protected (default: Kramer).
8| Tabletop Mount Connector| For connecting to the tabletop mount.
9| Cover| Covers the wall-mount connections and power button.
10| Power Button| Press to power on the KT-107. When powered, press briefly to open the pop-up menu and power down the device, reboot it or return to the home page. Press and hold to power down the device immediately. This button is also used for firmware upgrades.
11| Volume-up Button| Used for firmware upgrade. Use also to increase KT-107 speaker volume.
12| Micro USB Port| For connecting to an adjacent on-wall USB device and for firmware upgrades.
13| Flat Cable Connector| For connecting to the on-wall mount unit.
14| Connecting Holes| For connecting to the tabletop mount or the panel mount plate.
To prevent potential damage to the Touch Panel , use only Kramer-supplied screws and mounts.

Step 3: Mount your KT-107
Place the tabletop mount on the table (Portable Mount). The connected cables remain visible, and the table remains intact. Or secure the device as follows (Secure Mount):

Measure the exact location on the surface of the table where you want to install the KT-107.
Drill a hole in the table and optionally cut the cable pass-through opening according to the cut-out dimensions defined in the user manual.
Secure the tabletop mount to the table using the M5x60 secure screw.
Connect the Ethernet port to a PoE-enabled source. Optionally, you can connect the power adapter too (as backup).
Replace the appropriate cover and place the KT-107 over the tabletop mount (the Touch Panel is magnetically held in place), by first inserting the lower part of the Touch Panel and then carefully laying the KT-107 in place.
Wait for the home page to load and then secure the KT-107 to the tabletop mount from the rear side (using 2 M2x4 screws, supplied with the unit).
Optionally, lock the tabletop mount with a Kensington locker (not supplied).

To mount the device on a wall:

Install an in-wall junction box (recommended boxes are listed in the user manual)
Attach the on-wall mount unit to the installed junction box (top side up see indication arrows on the unit). Connect Ethernet and/or power cables and optionally, insert the right-angle USB cable (supplied) for connecting to an adjacent external USB device.
Screw the 4 wall-mounting screws (supplied) through the screw openings. The various screw openings fit various types of wall junction boxes.
On the rear side of the KT-107, remove the screw cover and the cover (by slightly pressing downwards and then pulling out) and set it aside.
Attach the panel mount plate to the rear side of the KT-107 (using 4 M2x4 screws, supplied).
Connect the flat cable from the on-wall mount (attached to the inwall junction box) to the connector on the rear of KT-107.
Hang the KT-107 on the wall by sliding the tabs on the attached panel mount plate over the grooves on the on-wall mount unit.

For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/KT-107.

**** Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible with the device.
Avoid uneven mechanical loading.
Appropriate consideration of equipment nameplate ratings should be used for avoiding the overloading of the circuits.
Reliable earthing of rack-mounted equipment should be maintained.
The maximum mounting height for the device is 2 meters.

Step 4: Connect the power
Connect the power cord to KT-107 and plug it into the mains electricity.
Safety Instructions (See www.kramerav.com for updated safety information)
Caution:

For products with relay terminals and GPIO ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
There are no operator serviceable parts inside the unit.

Warning:

Use only the power cord that is supplied with the unit.
Disconnect the power and unplug the unit from the wall before installing.

Step 5: Customize KT-107 settings
The Settings page is accessible from the home page and enables customizing the KT-107 settings:

To change the date and time settings:

From the home page, tap Settings.
Go to System and tap Date & time.
To get the date and time from the Network, turn on Use network-provided time. When turned off, it is necessary to enter the date and time manually.
Below Time Format, select a time option.

To change the display settings:

From the home page, tap Settings > Display.
Set the following (as necessary):
Brightness level : brightness level, adaptive brightness.
Always hide top status bar : Show/hide top status bar.
Always hide bottom navigation bar: Show/hide bottom navigation bar.
Screen timeout: Sleep timeout.

To change the Control button settings:

From the home page, tap Settings > Control.
Turn on or off the Control button (Kramer Logo touch).
Set the Control button password-protected as on or off.

To change the Control button password:

From the home page, tap Settings > Control.
Tap Change password (the default is “Kramer”).
Follow the instructions in the Password Set window.

To configure the Boot Start App

From the home page, tap Settings > Control.
Tap Select Boot Start App and select either Kramer Control or None. If you select the Kramer Control app, it opens on startup.

For the KT-107 model: FCC-ID-R8S-KT-107
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. The operation of the device is subject to the following conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation

Recommendations for safe exposure to non-ionizing radiation: Only use the device at least 20 centimeters away from your body.

Technical Specifications:

Tabletop Mount Ports:| 1 1000/100/10BaseT Ethernet on RJ-45 connector; 1 micro USB 2.0 2-pin terminal block for DC power supply
---|---
On-wall Mount Ports:| 1 1000/100/10BaseT Ethernet on RJ-45 connector
1 2-pin terminal block connector for DC power supply
Speakers:| 2×1 W, 8ohm
Microphone:| -42dB ±3dB @ 1kHz sensitivity
CPU Performance:| 1.6GHz Quad-Core, GPU, 2GB RAM, 16GB Flash
OS Software:| Android 10.0
Multi-Touch:| 10 points, 2-finger gesture
Display:| 7” IPS, 1280×800 RGB pixels, 16:10 aspect ratio, ±80° horizontal/vertical viewing angles, 400cd/m2 brightness, 800:1 contrast ratio
Video Format:| Decoding: H.265/HEVC; H.264/AVC; MPEG-1/2/4; DivX 3/4/5/6; MVC; GOOGLE VP8; VC- 1; H.263; SORENSON SPARK; ON2 VP6; MOTION JPEG; Encoding: H.264/AVC
Ethernet Port:| 10/100/1000Mbps PoE LAN
Wireless Communication:| Wi-Fi 802.11 b/g/n/ac, Bluetooth 4.0
Camera:| Front, 2M pixels, HD 720p
Battery:| Rechargeable supports up to 3 hours of Wi-Fi operation
Controls:| Hidden reset button, power button, volume-up button
Touch panel status LED: flashes green during charging, green for fully charged, red for the camera on
Power Inputs:| Power over Ethernet (complies with IEEE802.3af and IEEE802.3at PoE standards), power supply unit
Power Consumption:| 5V DC, 3A
Operating Temperature:| 0° to +40°C (32° to 104°F)| Storage Temperature:| -10° to +55°C (14° to 131°F)
Humidity:| 10% to 90%, RHL non- condensing| Case Design:| Black body and cover
Dimensions:| Shipping dimensions:22.4cm x 13cm x 20.6cm (8.8″ x 5.12″ x 8.1″), W, D, H Touch panel: 17.8cm x 1.3cm x 13cm (7″ x 0.51″ x 5.12″), W, D, H
Tabletop mount: 18.5cm x 10.7cm x 12.4cm (7.28″ x 4.2″ x 4.88″), W, D, H Panel mount plate: 14.6cm x 3.7cm x 9.2cm (5.75″ x 1.46″ x 3.62″), W, D, H On-wall mount unit: 14.6cm x 1.1cm x 9.1cm (5.75″ x 0.43″ x 3.58″), W, D, H
Weight:| Shipping weight: 1.8kg (3.97lbs) approx.; Touch panel: 0.37kg (0.8lbs) approx.
Included Accessories:| Power supply unit adapter (5V, 4.0A AC/DC), tabletop mount, on-wall mount unit, panel-mount plate, right-angle OTG USB cable, installation screws
Certifications:| CE/CB, FCC, ROHS, REACH
Mounting Options:| Table top (with tabletop mount unit), on-wall (with mount unit and panel mount plate)
Specifications are subject to change without notice at www.kramerav.com