Adx Labs MINI2 Bluetooth Speaker User Manual
- June 5, 2024
- adx labs
Table of Contents
MINI2 Bluetooth Speaker
User Manual
Warnings
- To ensure proper use and trouble-free operation, please carefully read this user manual first.
- Charge fully prior to first use.
- Use and store this product at room temperature.
- To avoid damage, do not drop or throw the speaker.
- Do not expose to fire, high temperature, or direct sunlight
- Do not clean with organic solvents or other chemical cleaners.
- Do not allow small particles to get into the product.
- Keep speaker volume at a moderate level to avoid temporary or permanent hearing impairment.
- Do not disassemble the product or make any modifications to the structure or any parts.
- Keep product out of reach of children.
Packing Details
Button Functions
Disconnect Bluetooth
Press and void “+” and “-“at the same time to disconnect the current device
and set MINI 2 into discoverable status; short press the power button to
connect to the last connected device.
Port function indicators
Data Access
Insert a Micro SD card when the speaker is powered off. Use the data cable to
connect to the PC, and press and hold the “Power” button to enter SD card
mode, the user can copy music files to the Micro SD card.
Bluetooth Connection
-
Power On
Press and hold the “Power” button for 2 seconds. When you hear the audio prompts “ding ding” and “ding” the blue LED will blink, indicating that the speaker is awaiting a Bluetooth connection. -
Connect to Bluetooth
Go to your device’s Bluetooth list, and find an arid connection to the device “MY MINI 2”. Speaker is connected when you hear the audio prompt “ding ding” and the blue LED remains lit.
The MINI 2 can reconnect automatically when the Bluetooth is switched ON, for the device.
Other tips
To connect to another Bluetooth device, press and hold “+” and ” – ” at the
same time to disconnect the current Bluetooth device, MINI 2 will enter
pairing mode to await a new device connection.
True Wireless Stereo Function
- TWS connection Before starting, the speakers cannot be connected to any Bluetooth devices. Power on both MINI 2 speakers at the same time (both LED lights will be flashing). Choose one speaker and press the “+” and “-” buttons at the same time, once connected, the other MINI 2 LED light will stop blinking.
- Let TWS Speakers connect to the Bluetooth device Go to the CIPViCP’S Bluetooth list, find “MY MINI 2” to connect (if you see 2 MY MINI on the list, the speakers are not in TWS mode) and the LED light will stop blinking.
- TWS disconnect On the MINI 2 press the “+” and “-” buttons to disconnect the TWS.
Tips;
- Connecting two MINI 2 (TWS Mode) on the first one press “+” and “-“, this speaker will become the master speaker (left channel) and the other will become the slave speaker (right channel).
- Only supports two speakers under a TWS connection.
- Speakers will remember the TWS relationship (master/slave) when reconnected.
- Once TWS is connected, the slave speaker’s LED will be ON and the master speaker’s LED indicates the status of play, pause, Bluetooth connection, etc.
- When TWS is connected the function is the same on each MINI 2 speaker (synchronous functions).
- Upon powering both MINI 2 speakers at the same time, if the LED is solid on one and the other is blinking, the speakers are in TWS mode.
Technical Specifications
Basic
Type| Bluetooth Speaker
Micro SD card| Supports up to 326
Power Supply| Built-in 2000mAli Li-ion battery
DCSVRA Type C charging cable
Technical
Trumpet| 52MM trumpet with X bass radiator
Output| 7.5W THD=10%
Frequency Response| 100Hz- 18KHz
BT version| Bluetooth 5.0
Music files| MP3, WMA, WM’, APE, FLAG NI P3:8Kbps-320Kbps WMA:32kbps-384Kbps
WAV:32Kbps-1414Kbps
Product Size: 118 x 90 x 90rnm
Product weight: 417einc(used Lithium battery)
| Questions | Solutions |
|---|---|
| Cannot connect | 1. Restart the speaker |
2. If a Passcode is required, enter 0000
Discontinuity| 1. Ensure there is no more than 10M (301 between the device
and the speaker
2. Ensure there are no barriers between the device and the speaker
Micro SD cannot play| 1. The Micro SO should be formatted as FAT32
2. The formats of music files should be WAV, MP3, WMA
No sound when playing| 1. Check the volume levels & adjust
2. Check if paused or muted
Cannot power on| 1. Check for low battery
No response| 1. Reset the speaker (hold the power button for 8 -10 seconds)
FCC Caution.
(1)§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Changes or modification warning
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>