Danfoss VHS Design Cover Instructions
- June 3, 2024
- Danfoss
Table of Contents
Danfoss VHS Design Cover
Montage Mounting
INSTALLATION INSTRUCTION
Demontage Removal
Guidelines for wet lacquering of cover
- Material: White Ceycolac S704S (ABS).
- Pre-treatment: Pre-treatment is not necessary.
- Temperature: Max. 80° C.
- Lacquer: Compatible with ABS.
- Suspension: To be fastened to inside of cover.
- Colour shades: All shades.
- Light shade: Layer thickness not critical.
- Dark shade: Possibly extra layer.
- Layer thicknesses: 15-20 m/ layer.
- Further information: GE Plastics:
- Painting Guide
- GE Plastics General Electric Plastics GmbH
- European Headquarters Eisenstraße 5
- General Electric Plastics B.V. D-65428 Rüsselsheim
- 1 Plasticslaan, PO Box 117 Germany
- NL-4600 AC Bergen op Zoom Tel. (49)(6142)6010
- The Netherlands Fax (49)(6142)65746
- Tel. (31)(164) 29 29 11
- Fax (31)(164) 29 49 40
- Fault-finding:
- Inadequate adhesion: Paint system not compatible with ABS.
- “Orange peel” An effect of the application technology as applied, i.e. spray and viscosity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>