DozenPov XEYE Professional POV Camera User Manual
- June 5, 2024
- DozenPov
Table of Contents
DozenPov XEYE Professional POV Camera
Key Description
Power Key:
- Long press tor 3 seconds to turn on, long press for 3 seconds to turn off.
- Short press 2 times to turn on WIFI.
- Short press 1 time to turn off WIFI.
Red Video Key:
- Short press once to start/stop Video Recording.
- Short press 2 times to start Time-lapse Recording
- Long press for 3 seconds to start Slow Motion Recording
Camera Key :
- Short press once trigger to take a Photo, but take a photo after the countdown 2 seconds.
- Long press for 3 seconds to Shoot-continuously.
The Metal Decorative Sheet is the heat dissipation area of the device, If fever, a temperature not higher than 55° is normal
LED Description
Power LED ( Double Row of the LED):
Function LED (Single LED) :
WIFT LED: After WIF| is turned on, the power LED is yellow and the
battery indicator color flashes alternately. After WIFl is turned off, the
power LED will be on again.
For Example: When the battery is full, turn on WI, power LED bashes green
and yellow alternately.When the battery is below 50%, turn on WIFT, power LED
bashes yellow.
Live (UVC) Mode: When the device is in the standby state, plug-in Type-C
data cable to connect the computer/smartphone, it will enter by default
Reading Micro SD ( MSDC ) Mode: Switch on, in the Type-C data cable
connection state, long press 2 seconds video key to enter the leading micro SD
state, and then long press 2 seconds video key to exit the card reading state
( shutdown does the same ).
Battery Indicator LED:
Red LED bashes below 10%, Yellow LED bashes below 50%, Green LED bashes above
50%, Green LED on when it is 100%.
Lens Description
Rotate Left or Right: Switch between Horizontal & Vertical screens
Hand-touching Feelings Bar
Pitch Angle Rotation: Adjust the shooting angle of view.
Interface Description
Type-C Interface :
- Charging
- Image Transmission: When connecting computer or phone via a data cable, the USB Camera Mode is automatically turned on.
- Disk Mode: When the data cable is connected to a computer or phone, keep the product on, press and hold the video key ( Red one )for 3 seconds to enter the U Disk Mode. Long press for 3 seconds to exit the U Disk Mode and shut down.
Memory Card Interface
- Micro SD only. Speed class 10 ( 100M/S) and above.
- MAX is 512GB
- Supports boot operation.
- To use the memory card for the 1st time, please format the Micro SD card on the “My” page in the XEYE APP.
APP Description
- Connect to Phone: Short press the XEYE power key twice for WIFI on . Open the XEYE APP directly, click the WIFI logo in the upper left Corner and follow the steps to connect to the WIFI. ( If some smartphones prompt for a password, the password is 1234567890 )
- Home Page Description: The upper right corner: Preview image interface, this interface can be directly controlled by phone to shoot.
XEYE Files: The File stored in the Micro SD card after shooting, long
press can be directly downloaded to the phone
Show Time: Files downloaded to the phone can be shared directly by long
pressing.
lam Ur Eye: Here to enter the live broadcast interface.
Human-computer Interaction Settings: In order to make this function more in line with your habits, please follow the settings below : When using it for the 1st time, set it according to yOur tavorite action: for example, nodding twice in a row The product system will continue to perform algorithm matching for you, which will make your control more and more accurate in use.
Voice Control
Calling Words: ” Hello, Eyes “.
Function Words: “Start Recording “/”End Recording “/ ” Photo” Wake Up Prompt:
Buzzer will beep tor 1 second, and the green LED will flash for 1 second. If
there is no command within 5 seconds buzzer will beep for 1 second and Green
LED will flash.
- If the instruction is to start recording, the buzzer will beep once (the same effect as other functions triggering recording
- After Waking Up Eyes: If the instruction is to end the recording, the buzzer will beep twice ( same effect as other recordings off).
- After Waking Up Eyes If the command is photo, buzzer will beep once and the Blue LED will bash once. After an interval of 2 seconds, the photo will be taken and buzzer will beep again and the Blue LED will bash once.
- O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in RoHs.
- X: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirement specified in RoHs
Spec
FCC warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This devICe complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interterence that may cause undesired operation. This equipment complies with RE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>