YAMAHA TWE3B Truly Wireless Earphones User Guide

: June 5, 2024
: Yamaha

Table of Contents

YAMAHA TWE3B Truly Wireless Earphones
Introduction
Product, Accessory and Part Names
Preparation
Making a Bluetooth® connection
Pairing
Basic operations
Specifications
Bluetooth
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YAMAHA TWE3B Truly Wireless Earphones

YAMAHA TWE3B Truly Wireless
Earphones product

Introduction

Thank you for purchasing this Yamaha product.

For correct and safe use of this product, be sure to first read this manual and the separate “Safety Brochure”.
After reading this manual, keep it together with the warranty card in a safe place for future reference.

Product, Accessory and Part Names

YAMAHA TWE3B Truly Wireless Earphones
fig 1

Earphones (L, R)
The microphone is built in. b Function key
Indicator
Charging case
Charging connector
Eartips (SS, S, M, XS) 1 set each
- - The M-size eartips are attached.
USB power cable
Quick Start Guide
Safety Brochure

Preparation

Charging

To charge the charging case and earphones, connect the included USB power cable to the charging connector on the charging case and to the USB port on a commercially available USB power adaptor (5 V DC/min. 0.5 A output).

The indicator is lit in orange during charging and goes off when charging is completed.
Charging takes about two hours. When charged, the earphones can play back continuously for approximately 6 hours.

Making a Bluetooth® connection

YAMAHA TWE3B Truly Wireless Earphones fig
3

When using the earphones for the first time, the pairing process, which allows Bluetooth devices being connected to detect each other, must be performed. Once paired, the Bluetooth devices will be automatically connected the next time they are turned on.

Pairing

Remove the right earphone from the charging case.
- The indicator on the right earphone flashes alternately in blue and red, and the earphone enters pairing standby mode.
Remove the left earphone from the charging case.
Operate the connected Bluetooth device to display the Bluetooth setting screen.
Select “Yamaha TW-E3B R” from the displayed screen.
- When pairing has completed, the indicator lights up in blue for 20 seconds.
- If pairing has not completed within two minutes, it will be considered to have failed, and the indicator goes off.
- To try pairing again, turn the earphones off, then on again.

Registering another Bluetooth device/Perform pairing operations again

For details about paring, refer to the this website.

Turning on

Remove the earphones from the charging case. Otherwise, press the function key on each earphone (left and right) for two seconds.
When the earphone turns on, the indicator lights up in blue (for one second).

Turning off

Place the earphone in the charging case. Otherwise, press the function key on each earphone (left and right) for five seconds.

When the earphone turns off, the indicator lights up in red (for one second).

Basic operations

Listening to music

Play	Press the function key on either the left or right earphone once.
Pause	During playback, press the function key on either the left or

right earphone once.
Raise the volume| Press the function key on the right earphone twice.
Lower the volume| Press the function key on the left earphone twice.
Skip to the next song| Hold down the function key on the right earphone for two seconds.
Skip to the previous song| Hold down the function key on the left earphone for two seconds.

Using the phone

Receive a phone call| When a phone call comes in, press the function key on the right earphone once.
---|---
End a phone call| During the phone call, press the function key on the right earphone once.
Raise the conversation volume| Press the function key on the right earphone twice.
Lower the conversation volume| Press the function key on the left earphone twice.
Ignore a call| When a phone call comes in, hold down the function key on the right earphone for two seconds.

Specifications

Bluetooth version	Version 5.0
Supported profiles	A2DP, AVRCP, HFP, HSP
Supported codecs	SBC, AAC, Qualcomm® aptX™
RF Output Power	Class 1
Maximum communication range	Approximately 10 m (without interference)
Number of devices that can be registered	Up to 3 devices
Internal rechargeable battery	Lithium-ion battery
Charging time	Earphones: Approximately 2 hours

Charging case: Approximately 2 hours

Continuous playback time| Approximately 6 hours
Charging frequency from charging case| Approximately 3 times
Charging temperature| 5 – 40 °C

Bluetooth

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their respective owners.