Ningbo Yeguang Electrical Technology WP561 Power Strip User Manual
- June 5, 2024
- Ningbo Yeguang Electrical Technology
Table of Contents
Ningbo Yeguang Electrical Technology WP561 Power Strip
PRODUCT DESIGN
BRIEF FUNCTION
The wireless charger socket includes 2 AC outlets, and 3 USB ports and supports wireless charger device use.
SPECIFICATION
- Model: WP561
- Name: POWER STRIP
- Rated Voltage: AC 120(240)V/60Hz Rated Current: MAX 10A
- Rated Power: MAX 1250W
- USB Input: 100V-250V~ 50/60HZ
- USB Output: DC 5 V/2.4A MAX Wireless Charger Power: 5V/1A 5W MAX
ATTENTIONS
- When you use this power strip product, please don’t exceed the MAX power.
- Do not cover the power strip with anything when using it.
- Do not use it in a humid environment.
- Do not disassemble or modify it by yourself.
- Do not coil the extension cable socket. If the coil cable is used, the actual current is lower than the rated current.
ABOUT WIRELESS CHARGER ATTENTION
- Please make sure your charging device supports a wireless charger while you use the wireless charger function.
- Please keep the charging device with a wireless charger socket distance of less than 5mm.
- Please put the charging device in the central charging area for a better-charging effect.
- Please remove the charging device protection cover for better charging results.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>