HIKVISION DS-PK1-LT-WE-WB Series Wireless LCD Keypad User Manual

: June 3, 2024
: Hikvision

HIKVISION DS-PK1-LT-WE-WB Series Wireless LCD Keypad User Manual

Diagram References

©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
Trademarks and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

+ identifies the positive terminal(s) of equipment which is used with, or generates direct current. – identifies the negative terminal(s) of equipment which is used with, or generates direct current.
No naked flame sources, such as lighted candles, should be placed on the equipment.
The serial port of the equipment is used for debugging only.
Install the equipment according to the instructions in this manual.
To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions.
Keep right direction when using the equipment.
The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation.
After the installation, the equipment, including any associated mounting plate, shall not be damaged

Appearance

Indication LED Description

Buzzer Description

Two short beeps: Operation succedded
Three short beeps: Operation failed
Rapid short beeps: Entry delay
Slow short beeps: Exit delay
Repeated sound effects: Fire alarm/Medical alarm/Panic alarm/Lid opened alarm

Enrollment

Remove the screw on the bottom of the keypad.
Disassemble the keypad and remove the rear panel.
Power on the security control panel.
Download and install APP.
Log in APP and tap the icon “+”. Scan the QR code or enter the control panel serial No. to add the control panel.
Enroll the peripheral locally, with OR code, or with serial No..

Enroll the Peripheral Locally

In the APP, tap the “Enrollment Mode” button on the control panel page to make the control panel enter the enrollment status.
Push the power switch of the peripheral to ON, and it will be automatically enrolled to the control panel.
Note: when the keypad has been enrolled to the control panel A, if there is a control panel B in the enrollment mode around when the power is turned on, the keypad will enroll to the control panel B.

Enroll the Peripheral with QR Code or Serial No.

1. In the APP, tap the icon “+” and scan the QR code or enter the serial No. on the peripheral.
2. Push the power switch of the peripheral to ON, and it will be automatically enrolled to the control panel.

Enroll the Peripheral with QR Code or Serial No

In the APP, tap the icon “+” and scan the QR code or enter the serial No. on the peripheral.
Push the power switch of the peripheral to ON, and it will be automatically enrolled to the control panel.

Remove the screw on the bottom of the
keypad. Disassemble the keypad and remove the rear panel.
Scan the QR code on the rear panel of the keypad. Push the power switch to ON.

Installation

Note: The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged.
Check signal strength and select installation place
Enter the signal checking mode by operating on the control panel.
Signal LED flashes green: Strong.
Signal LED flashes orange: Medium.
Signal LED flashes red: Weak/Disconnected.

Secure the rear panel on the wall with four supplied screws
Attach the front panel onto the rear panel.
Tighten the screw on the bottom to complete.

Command

The keypad command is shown as follows. A short tag swiping (<3 s) is equal to a password.

Arming Process (Enabled/Disabled on Control Panel) Pre-arming

Indication:
The keypad displays “Waiting for arming”
The fault LED turns solid orange

Fault Checking Indication:

All faults of the control panel and the zones to be operated will be displayed. You need to use scroll keys to view all faults
before next operation.
– Away arming: Confirm by
– Stay arming: Confirm by
– Cancel:
The fault LED turns flashing orange

Exit Delay

Indication:
The keypad displays “Exit delay”
The arming LED turns flashing blue and the buzzer indicates exit delay. Arm Directly
Press the or to arm the device.

Indication:

Armed: arming LED solid blue for 5 s. Buzzer beeps twice.
Arming failed: Buzzer beeps three time. Cancel
Press the to cancel the arming process.

Indication:

Armed: Buzzer beeps twice.
Arming failed: Buzzer beeps three time.
No Instant Operation
The count down is finished.

Armed:

Indication:

arming LED solid blue for 5 s. Buzzer beeps twice.
Arming failed: Buzzer beeps three time.

Reset

Hold the Tamper Switch and turn on the power until the LED flashes red 3 times.

Simple Mode

Arm
The keypad is diarmed.
A short tag swiping (<3 s) to away arm.
A long tag swiping (≥3 s) to stay arm.

Disarm

The keypad is armed.
A short tag swiping (<3 s) to disarm.

Note:

A single swiping interval needs to be longer than 3 s. Multiple swipings within 3 s count as one time.
Simple mode does not support arming process.

Settings

User Management: Add/Edit/Delete users.
Tag Managment: Add/Edit/Delete tags.
Restore Alarm: Confirm alarm or restore tamper of the control panel. (Only when the control panel supports and enables
PD6662. Only installer has this permission.)
Company/Telephone: Edit company name and telephone number.
Control Panel Lock/Unlock: One-push to lock or unlock the control panel. (Only installer has this permission.)
Bypass/Restore Bypass: Bypass/Restore bypass zones.