ShenZhen MIAOIN Technology ACP04 Wireless Carplay Touchscreen for Apple Carplay or Android Auto User Manual

ShenZhen MIAOIN Technology ACP04 Wireless Carplay Touchscreen for Apple

Carplay or Android Auto User Manual

Preface

Thank you very much for choosing and purchasing our products! In order to help you use this equipment correctly, we sincerely suggest you read the instructions carefully.

Please read all the information in this user manual before using the product. The main purpose of the user manual we provide is to let you comprehend all the functions and help you use more smoothly, quickly and easily.

Production and UI Pictures displayed may be a little different from the actual pictures,Please understand.

If the software version is updated, some parameters may change without notice. Thank you for your support, understanding and cooperation.

Note: any part of the copyrighted information in this user manual shall not be copied or photocopied in any way without the prior written permission of the company. Our company reserves the right of final interpretation of warranty related information in this user manual.

Product Profile

Product and fittings

1. Product
2. Power cable
3. AUX cable
4. Soft rubber suction cup
5. Shim

Connector definition

1. MIC (Built-in)
2. AV-in (Parking Camera jack)
3. AUX (Wired media)
4. USB (charging and USB disk)
5. DC (For power cable)
6. UPDATE (Upgrade system)

Installation instructions

Product and Bracket installation
Insert the four claw fitting of the Soft rubber suction cup into the groove on the back of the product and slide it up to lock in place.

Installation to the car
Remove the protective film from bottom of the Soft rubber suction cup. Then press Soft rubber suction cup on the flat surface (dashboard or front windshield) and push the lock down completed installation( Lock and Unlock like the picture shown below). Adjust the angle by fitting the tighten knob. Lock and Unlock like the picture shown below.

Installation position:
Just on clean dashboard or front windshield

• If the dashboard is not clean enough or irregularity, you will need the shim.

Power supply
Insert the 2.1 DC connector to DC jack of product left side . You secure the cable between the edge of the windshield and the dashb can to ensure that it is neat. Then insert the power cable adapter jack intoard the cigarette lighter of car.

Notice

1. Make sure that the installation position does not block your view.

2. Do not operate while the vehicle is running.

3. Some Android version may not be compatible with Android auto.
   Therefore, we recommend you update your phone’s operating system to the latest version.

4. The APP displayed on the product (when paired with Carplay or Android auto apps) vary depending on the apps available on the connected phone.

5. The product has no built-in GPS module, and the functions of all navigation applications depend on the connected mobile phone.

UI and main function

UI (user interface)

1. Android AUTO
2. Apple CarPlay
3. FM
4. Bluetooth phone
5. Bluetooth music
6. HOME
7. Daytime/Night mode
8. Volume
9. Return
10. AirPlay/ IOS Mirror
11. Setting
12. Auto Link
13. USB Video / picture / music

How to use Apple CarPlay (iPhone)
The Apple Carplay supports wireless connection and wired connection.

Before using wireless Apple Carplay, please refer to the following figure to set in settings.

Please use your Bluetooth pairing. The Bluetooth named “Drive link” or “Car *

• • *”. Follow the instructions on your iPhone to connect.

Tip: After wireless connection is successful, the Bluetooth connection will be automatically disconnected. IT need not click the Bluetooth connection, it will automatically switch to WiFi for data transmission.

Using wired Apple Carplay needs high-quality data cable to ensure the stability and efficiency of data transmission

Note: Using wired Carplay does not need to connect WiFi and Bluetooth

How to use Android Auto (Android phone)
The Android Auto supports wireless connection and wired connection.
Before using wireless Android Auto, please refer to the following figure to set in settings.

Please use your Bluetooth pairing. The Bluetooth named “Driveline Follow the instructions on your Android phone to connect.

Tip: After wireless connection is successful, the Bluetooth connection will be automatically disconnected. IT need not click the Bluetooth connection, it will automatically switch to WiFi for data transmission.

Using wired Android Auto needs high-quality data cable to ensure the stability and efficiency of data transmission.

Note: Using wired Android Auto does not need to connect WiFi and Bluetooth

How to use AirPlay
The AirPlay supports wireless connection and wired connection. Before using AirPlay, please refer to the following figure to set ISO Mirror in settings.

Before using iPhone AirPlay wireless, please ensure that iPhone has established WiFi connection with the product, password of “66668888”. In iPhone projection, select”**** – airplay” iPhone control center

Using iPhone AirPlay wired needs high-quality data cable to ensure the stability and efficiency of data transmission

Note: Using iPhone AirPlay wired does not need to connect WiFi and Bluetooth

How to use Android AutoLink
The Android AutoLink supports wireless connection and wired connection, if wireless connection you need set WIFI AutoLink “ON” Before using Android AutoLink, please refer to the following figure to set in settings. Also you need install the APP ” Autolink Pro”(lf

“AutoLink Pro” is not installed, please use the data cable to insert USB jack of product. APP installation interface will pop up automatically. Download and install “AutoLink Pro” according to the prompt). If phone appeared APP cannot be installed, you need operate mobile browser to the website “http://developer.autolink.top/Autolink_Pro.apk” download and install it. Android AutoLink Wireless connection need operate APP “AutoLink Pro” to click “Drivelink--**” then Just follow the prompts Android AutoLink wired needs high-quality data cable to ensure the stability and efficiency of data transmission, In this state, you need to connect Android mobile phone with Bluetooth for sound transmission.

About Media

1. It is built-in a 3-watt speaker.
2. Use the 3.5 audio cable to connect the AUX output port to the original audio input port of the car.
3. Music
   You can play the music from USB disk or transmitted by Bluetooth We recommend music files from USB disk are of one of the following formats (MP3/WMA/AAC/AC3/OGG/Real Audio/FLAG/APE)

Note: special information such as album cover and song name may vary according to the files on USB flash disk and mobile phone.

5) Video
You can play video files from USB disk
We recommend video files from USB disk are of one of the following formats (AVI/RMVB/MPEG/RM/MK/MOV/MP4/WMV/FLV) , Video in other formats is not supported temporarily

6) Picture
You can Enjoy pictures from USB disk
We recommend picture files from USB disk are of one of the following formats (JPEG/JPG/PNG) , picture in other formats is not supported temporarily

7) Parking Camera
The car camera and its fittings shall be purchased separately. As picture shown below, after the car reversing mode is turned on, it will turn on the working mode automatically.

Other set and information

4.1 Update and feedback
If you need to update the system or have any problems during use,
please go to our website to contact us. https://www.aidrivelink.com

4.2, other set

General

• Language : Chinese or English
• Radio Area: 6 area
• WLAN : the name and password of Wi-Fi
• Smart Phone : used to set CarPlay/AirpPlay or Android Auto/AutoLink
• Backlight Setting : adjust the brightness, saturation, color, contrast and backlight brightness of the screen,
• Version Info: the version information of system
• Upgrade: No work, if it needs update system you have to go to our website to contact us. https://www.aidrivelink.com
• Restore: Restore factory settings

EQ: Adjustable sound effect. ACP04 built-in speaker is default standard mode.

Sound

• Volume: Adjust audio volume
• Microphone: Adjust microphone volume

Product information

FCC Caution

Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>