TANITA MC-580 Bio-Impedancemetry Body Composition Analyzer Instruction Manual
- June 5, 2024
- TANITA
Table of Contents
- TANITA MC-580 Bio-Impedancemetry Body Composition Analyzer
- Connect to the power supply
- Turn on the main power supply
- Set Location code
- Set date and time
- Setting Printer Output
- Printer Set up
- Taking measurements
- Set personal data
- Step back on the device and lift up the grips
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TANITA MC-580 Bio-Impedancemetry Body Composition Analyzer
Connect to the power supply
Turn on the main power supply
Set Location code
When the power is first turned on with factory settings, the Location Code is displayed. Different locations across the world have varying gravitational pulls. This in turn affects the accuracy of weight readings on this product. By selecting the oorrect gravity setting according to your geographical location, you are guaranteed the most accurate weight readings.
- Press the switch on the back to turn the power on. HREHis displayed in the Display Screen.
- Refer to the map endorsed, and press the buttons to select your location code.
- Press the SET| button to enter and save the setting.
Set date and time
- Select the year using the and buttons.
- Press to confirm. Set the date and time in the same way. 0.0kg is displayed after displaying the set region, year, month, day and time.
Setting Printer Output
- Press and hold the ‘arrow down’ button for 5 seconds
- Select SETTINGS 9 OUTPUT (press arrows up and down to scroll through the menu) and press SET
- In menu AUTO PRINT select 1 for printing results once, select 2 for printing the results twice. Press SET
Printer Set up
- Press the cover open button to open the paper cOver.
- Set the paper roll as shown in the picture (Make sure the printing surface is correct, or it does not print properly)
- Close the paper with the tip end emerging from the tear bar.
- Connect Printer Adapter to the main power supply
- Connect the Printer and device with an RS-232C cable
Taking measurements
- Turn on the power supply
- Set clothes weight:
CLOTHES-WEIGHT
Enter the preset tare value (clothes weight) The tare value range is 0.0 to
10.0kg/0 to 20.01b Press the SET button when SETTINGS a CLOTHES-UT is
displayed. Select the clothe’s weight using the buttons then press the (SET
button. The product beeps to indicate this is completed.
Start measurement:
Make sure the Control Unit reads 0,0 kg then step barefoot onto the platform
Set personal data
Enter Personal Data
set personal data by selecting it with the buttons and setting it by pressing
the(SETJ button.
Athletic Mode
Recommended for those who are 18 years or older and meet the following
conditions.
- People who carry out 12 hours or more of cardiovascular exercise a week.
- People who belong to a sports team or a sports organization with the aim of participation in the competition, etc.
- People who are professional athletes.
Step back on the device and lift up the grips
Measuring Body Composition
The setting is complete when HOLD GRIP is displayed. Hold the Grip in both
hands.
When the measurement is completed, the display will show ‘Please wait’ after about 5 seconds the results will be printed.