TOMMY HILFIGER B0814VTYQK Powering On-Off Your Headphones User Manual

TOMMY HILFIGER B0814VTYQK Powering On-Off Your Headphones

Powering On/Off Your Headphones

To turn on your headphones, press the Power button for 3 seconds. A blue indicator light will illuminate, and the headphones will enter bluetooth pairing mode automatically.
To turn off your headphones, press the Power button for 3 seconds. The indicator light will turn off.

Bluetooth Listening Mode

Step 2: Press the Power button for 3 seconds. A blue indicator light will illuminate, and the headphones will enter bluetooth pairing mode automatically. If your device has been previously connected, the head- phones will automatically pair, indicated by a solid blue light. If you’ve never connected your device, the headphones will enter pairing mode, indicated by a flashing blue/green light.

Answering/sending a Phone Call
Your headphones are equipped with integrated hands-free functionality. Should you receive an incoming call, you will hear a standard telephone ring through your headphones.
To answer the call, press the Answer/End/Send Call button and speak as you normally would during a conversation. To end the call, press the Answer/End/Send Call button.
To redial the last recorded number, double tap the Answer/End/Send Call button.

Bluetooth Listening Mode2
Step 3: Navegate to the list of Bluetooth accessories from your device. Select “Tommy HeadPhone 400” from the list of new connections, and add the headphones to your list of trusted Bluetooth accessories.
Your headphones are now connected to your device, as indicated by a solid blue light.

Using the Wired Mode

To use your headphones in wired mode, plug in the included auxiliary cord into the auxiliary jack on the headphones. Ensure the cable is fully inserted to produce full stereo sound. Plug the headphones into any 3.5mm jack. Ensure the cable is fully inserted to produce full stereo sound.

Adjusting your Headphones

• While grasping the headband, gently slide the adjustable leatherette ear cup towards or away from the edge of the headband to achieve optimal placement over your ears. Repeat with the other ear cup.
• Grasp the center of the headband with one hand, and grasp one of the ear cups with your other hand.
  Gently fold the ear cup towards the center of the headband to fold. You’ll notice a slight resis- tance followed by a clicking sound, which will allow the headphones to fold for compact
  portability. Repeat with the other ear cup.

Charging Your Headphones

To charge your headphones, plug in the included micro-USB charging cable into the micro-USB charging port on the side of your headphones. Plug the USB side into a USB charging port. The red indicator light will illuminate when the headphones are charging. When the headphones are fuly charged, the Green indicator light will turn on The red indicator light will lluminate when
battery power is low. NOTE:
Before using your headphones for the first time, fully charge the battery once.

Navegating the Integrated Remote

• Changing the Volume: Press and release the Volume Up button to increase volume. Press and release the Volume Down button to volume down.
• Changing the Song: Press and hold the Next Song button to Next Song.Press and hold the Previous Song button to Previous Song.
• Play/Pause the Song: Press and release the Play/Pause button to pause the current song. Press and release the Play/Pause button to play the paused song.

Tech Support/Warranty Registration

TECHNICAL SUPPORT

• You can contact our technical support representatives, and they
• will assist you with any questions you might have.
• Visit our support page online at www.sveselectronics.com

FM Listening Mode

• Your headphones are equipped With an integrated FM antenna.
• To listen to FM radio. first, plug in the included micro-USB charging cable into the micro-USB charging port on the side of your headphones.
• Press the “mode” button to switch to the radio.
• Press the”‘Answer” button to auto search for radio channels
• Press the “Answer” button to stay on this channel

Go to the next station:
Press and hold the Next song/Volume up button
Go to the previous station:
Press and hold the Previous song/Volume down button

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>