Suisheng Technology MSTT700 Tire Monitoring system User Manual
- June 5, 2024
- Suisheng Technology
Table of Contents
UserManual
MST T700Tiree Monit toring SSystem
Prod ductsV1.00
Thank you for purchasing the MST700advanced tire monitoring sensor produced by Michelin(China) Investment CO., LTD Please read this manual carefully before installation to properly install this product. After reading, please keep it safe for future use.
Introduction
This product is suitable for 4 to 22wheels trucks, even more, used to monitor tribasic attribute, pressure, temperature, motion, and battery, in real-time and ow power consumption. Especially, the product is designed to support loading advanced algorithms for edge calculation and output more complex results that match the requirement of multiple application scene, including real-time warning and early-warning messages, asserts tracking and internal status analysis, etc. The product transmitter data to low power wide-area network (LPWAN) wirelessly, when the tire pressure is too low, too high, changing quickly, or the temperature is over the threshold, the product emits the alarm message immediately to the local or remote IoT gateway (the gateway is a standalone product, not including in the spec, please check with Michelin sales to get more information about the gateway).
The scope of this document is for how to install and using the product in
general truck. If you need to adapt the product to use in heavy trucks,
engineering vehicles, metro, etc., please contact Michelin Technology or local
agent dealers for the detail.
In this document, all parts provided by Michelin are marked with green color,
and other non-green parts are provided by the car manufacturer, please pay
attention. Michelin does not provide installation accessories such as screws,
bolts, nuts, straps, gaskets, and shrapnel.
Instructions for use
2.1 TransmitterActivity
Transmitter keeps in idle status after manufacture with ultra-low power
consumption, to active:
a) Install the transmitter and inflate the tire, when the tire’s pressure is>
2 bar and keep the status at least 2 min. Transmitter active and change to the
working mode, monitor tire attribute period, and send data to loT gateway.
b) Change the transmitter’s positioning (active by an internal motion sensor)
quickly, then use the APP to find the transmitter, connect and do active.
2.2 Transmitter’s defatiftsetting
The major parameter of the default setting in working mode include:
- Check tire’s major status, pressure, temperature, battery, motion, every I Os;
- Send status to loT receiver or gateway every 15min.
- When either pressure or temperature changes quickly, send an alarm message to loT receiver/gateway immediately and wait for ACK(acknowledge) message. If no ACK, re-send the message for 2-3 times.
2.3 UpdateTransmitter’s Setting
Use APP to change the transmitter’s default setting or load new detect
algorithm:
- Set checking period of the tire’s major attribute
- Set sending period of the status message
- Set the alarm threshold of the max pressure and temperature
- Loading alarm detect algorithm
- Bind transmitter’s ID with tire’s ID
- Update transmitter’s security key (AES 128bits)
2.4 Alarm message
Depending on the transmitter’s abnormal detection algorithm and threshold, the
alarm message includes:
- High/Low-pressure warning
- High-temperature warning
- Fast/Slow leak warning
- Low battery warning
IoT Receiver (gateway) collects all tire’s status and warning messages, sends the message to the cloud and triggers another local device for alarm.
Installation Notes
The transmitter is installed on the INSIDE SURFACE of the tire.
-
Remove the wheel from the vehicle and separate the tire from the wheel hub. Please ensure that the tire inside surface is clean.
-
Grind the tire inside and use Michelin Technology’s suggested tire adhesive to install the rubber housing. The grind process is MUST and it’s the key factor of the sticking firmness. Then wait for 24hr and CHECK the firmness again.
Fig.! Installation Diagram of Rubber Housing -
Put the transmitter into the rubber housing and adjust the position of the transmitter to fully inside the housing. For off-road trucks and engineering vehicles installation, DO SUGGEST to use adhesive again at the bottom and around of transmitter.
Fig.2lnstallation Diagram of Transmitter -
UseAPPscan the transmitter and bind it with the serial number of the tire.
-
Active transmitter by either inflating the tire or APP. Auto activity is working when pressure large than 2bar and keep at least 15min. 6) Waiting 15min and checking tire status in the cloud backend system.
Warranty
4.1 Warranty Period
The warranty period is from the time when the user purchased the product (the
date of the original purchase certificate), and the product warranty is 12
months.
4.2 The warranty does not apply to the following situations
a)Abnormal installation;
b) Any changes or modifications to this product without the consent of the
company;
c) Failure to use, maintain or store the product in accordance with the
requirements of the product user manual, causing human damage;
d) Unauthorized disassembly and repair damage;
e)Other failures or damages caused by problems other than product design,
technology, manufacturing, quality, etc.;
f) The product is under extreme temperature or environment or is affected by
corrosion, oxidation, and other chemical influences, the warranty will not
apply;
g) This warranty does not apply to any consumable parts of the system (such as
the battery in the transmitter).
Special Reminder
a) The sensor is a kind of tire monitoring system (TPMS), it is a safety
device that monitors the air pressure and temperature conditions of automobile
tires. It can remind users to take measures to eliminate hidden dangers in
advance when the above conditions are abnormal. However, it cannot be ignored
that the tire itself should be in good condition as required by the vehicle at
any time. The user should still check the following conditions according to
the requirements of the user manual of the car:
whether the depth of the tire pattern has reached the wear limit, whether the
tire has scratches, unilateral wear, cracks, or Defects such as fractures and
perforations. If the tire itself has the above defects and causes a tire burst
accident, it is not within the scope of the quality responsibility of the tire
pressure monitoring system.
b) This product sends the data of the pressure, temperature, and other tire
attribute to local or remote loT gateway, which are for reference and warning
purposes only and cannot prevent the occurrence of car traffic accidents.
c) This product complies with the relevant national laws and regulations on
automotive electronics products, the low-power transmitter and receiver
requirements of the radio management department, and the electromagnetic
compatibility requirements.
Disclaimer
The copyright of MST700tiresensor and related materials belong to
Michelin(China) Investment CO., LTD, and its property rights are protected by
national laws. Without the authorization of Michelin, other companies, units,
agents and individuals shall not use and copy illegally.
This document provides information about Michelin technology products. This
document does not grant any intellectual property license, express or implied,
or any intellectual property license is prohibited by speaking or otherwise.
In addition to the responsibility stated by Michelin in the sales terms and
conditions of its products, Michelin shall not bear any other responsibility.
In addition, Michelin does not make any express or implied warranty for the
sale and/or use of this product, including the suitability for the specific
use of the product, the marketability or the infringement of any patent
rights, copyright or other intellectual property rights, etc. guarantee.
Michelin products are not designed for medical, lifesaving or life support
purposes. Michelin may make changes to product specifications and product
descriptions at any time without notice.
The MST700tiresensor may contain certain design defects or errors. Once found,
it will be included in the errata and may cause the product to differ from the
published specifications. If requested by the customer, the latest errata can
be provided. Before ordering the product, please contact your Michelin
Technology sales office or distributor to obtain the latest specifications.
Michelin(China) Investment CO., LTD reserves the right to revise this user
manual at any time without notice.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (I) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment. The antenna(s) used for this
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.