UHF D400 Professional Wireless Microscope User Manual

UHF D400 Professional Wireless Microscope

Thank you for choosing our product, in order to let you use this product conveniently, please kindly read through the manual:
wireless microphone system with infrared automatic frequency function, which is through professional design and produce. With
excellent professional audio quality, the~ microphone system can help you deliver the smooth, clear and attractive voice in any stages.
Adopts the advanced techniques with combination of multi-channel, ultra high frequency, the signal is more steady, and the transmission. This microphone system is adjustable for different envi1ronment,and can be used together with many instruments. It is
the best choice for you as it is the leader  the have performance instruments.

Characteristics of the System

1. With UHF 470.5-607.SMHz frequency range: designed the signal receiving is more stable.
2. 200 frequencies can be chosen, which make it very convenient to use several sets at the same ti.me.
3. Sync IR synchronization frequency tech1nology adopted, the frequency of the transmitter can he received synchronously by the sync IR signal and synchronously with the receiver.
4. The receiver and the transmitter have LCD display screens, displaying the working frequency, the operation is :simple, direct and convenient.
5.  Truck bass, light median and clear alt c:an be delivered.
6. TI1e system can avoid noise interference and enlarge the dynamic range for the audio compressing-commanding technology.
7. Two 1. 5V batteries are used in the transmitter the battery lift is long, and it is convenient for user to buy, maintain and replace.
8. Balance independent and unbalance mix output design in the receiver, it is suitable for all kinds of audio equipment to connect.
9. The receiver and handheld microphone made of high strength alloy that it is sturdy and durable.
10. Low power indicator of microphone helps to replace the b3ttery in time.
11. Handheld, lavalier and headset microphone can be chosen to match with the receiver to meet the requirement of different occasion.

Function and operation

Function and Operation of Receiver

Froot panel

1. Power switch: Power On/Off button, press the power switch to turn on the receiver, the LCD screen is lit. Press it again to turn off the unit, the LCD screen is dark.

2.  Volume: The Volume control knob. clockwise rotate the knob, the volume increase. while negative rotation. the volume decrease.

3.  UP: Manually frequency selection button. Press the ‘·UP” button, the frequency and channel are up.

4.  DOWN: Ma1mally frequency se lection button. Press the “Down” button, the frequency and channel are down.

5.  SET: Menu setting button. Press it to confirm frequency after manually frequency setting, press it again to enter SYNC IR frequency selection.
   Long press the “SET’ button to enter the automatically frequency search (AFS) function.

6.  LCD display screen: Showing the frequency information.

7. IR: IR infrared window.

8. Volume +: Press this button to increase the volume.

9. Volume -: Press this button to decrease the volt1me.

Operation Method:

Receiver Frequency Setting:

1. Manually frequency setting, press the “UP”/”DO\VN” button, to select the frequency up or down after selecting the required frequency, press the ” SEI” button to confirm.
2.  Automatically frequency search, long press 11le ” SET’. button to enter automatically frequency search function, when finish. it will exit automatically.
3. SYNC IR, press tile .. SET” button. the receiver will enter SYNC IR frequency status, the screen shows” — —- ”, turn on the transmitter and face its infrared IR window, to the receive1·’s IR window, when the microphone screen is lit, the match is successful.

Back panel

1. Antenna socket
2. XLR Balanced Microphone Output
3.  Mix Audio Output
4.  DC output: It is for Power electricity cable inserting. Make sure the voltage is appropriate.

LCD Display Screen

1. RF & AF level display: Display the intensity index of RF and AF signal.
2. Frequency band section display: Dynamically di splay the workin2 section of frequency band.
3.  Channel display: Dynamic display the working channel.
4.  Frequency display: Dynamic display the working frequency.

Operation of Transmitter

Handheld Transmitter:

1. Head of Microphone: Grille and capsule is included.
2. LCD display screen: Channel and battery power situation display screen
3. IR infrared window (inside)
4. Power switch: Press it in short time to tum on. Press it in lo nger time to tum off.
5. Battery compartment: Put in 2 batteries.

Handheld transmitter display Screen:

1. Frequency display
2.  Battery display

Pocket transmitter

1. Microphone input socket
2. Power indication light. Press it to turn. Short press it to mute and tum on volume. Long press to turn off
3. Low power display: Replace the battery if the red light keep bright
4. LCD d isplay scrc:c:u: Display the working frcqucucy and battery capacity
5.  Select button: Press it to select the frequency manually
6. IR infrared window
7. Power level switch: “H , is high power for long distance use. “L,, is low power for short distance use.
8.  Battery chamber

Specification

• Frequency Range: UHF 470.5-607.SMHz
• Frequency Response: 40Hz – 18kHz
• Frequency Stability:< ± 30dB
• Modulation Mode: wide- band FM
• Modulation Range: 25MHz
• Total channels: 200 channels
• Working distance: 60m
• Channel spacing: 250 KHz
• Dynamic Range: 1 0OdB
• Maximum Deviation: ±45KHz
• AF Response: 65 Hz- 1 SKHz (±3 dB)
• Tout Harmonic Distorti o n : < 0.5%
• Audio Output Balance: 0-:1:SO0mV

Receiver :

• Power supply: AC 220-240V, 50/ 60Hz
• DC Adapto r output power: 13-1 SV, S00mA
• Power consumptio n :7W
• SIN Ratio: > 90dB
• PIN Ratio: > 80dB
• Fl Ratio: > 80d8
• Receive sensitivity: SdBu

Transmitter:

• Frequency Oscillation Mode: Analog system
• Transmitter Power: I OmW
• Modulation Mode : FM
• RF out put: l OmW
• Band width: 50MHz
• Frequency Interval: 250KHz
• Maximum Deviation : l:SOkHz;
• High Harmonics: > 40dB( with carrier )
• Battery Voltage: AA l .5V x2
• Battery Life : 8-10 hours

NotEs

1. Please choose non-intenn modulation frequency setting way. Within 25MHz bandwidth, 4 to 8 transmitters can be used at the same time commonly. If more than 8 transmitters would used together, other bandwidth should be applied
2. Appropriate distance should be ke1:p from the microphone to the receiver. At least t meter between them. Too far away or too near would affect the vocal performance ..
3. If signal receiving condition was :not as good as that expected. extended cord, exterior high-gain antenna or antenna amplifier can be used to enhance it.
4. When several sets of receivers are used together, high gain antenna, antenna amplifier and receive branch unit are advised to b,e used.
5. The receiver and transmitter must be set in the same frequency channe1.
6. Less signal interference between receiver and transmi1tter is much better. It is the best if signals from 1transmitter can reach receiver directly.
7.  If the a1rltenna of the receiver is omni–directional, the antenna should keep at least 0.5mm from the wall and keep away from the metal objects.
8. If several transmitter were used together, they should keep 20cm from each other to avoid interference.
9.  If the transmitters were set with small power, 100 transmitter at the same band can be used.
10. Hold the middle of microphone body when using. Too dose to the grill, the sound pickup would be affected. Too close to 1the cable at the bot1tom. transmission efficiency and working distance would be decreased.
11. The position of headset microphone is usually near to ·the mouth. You can adjust the distance between the microphone and mouth to increase the treble or bass.
12.  if the system would not be used for a long time, please turn off it and take th1e battery out.

Troubleshooting

FCC warning statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device operates on a no‐protection, no‐interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC‐2‐1‐28, Voluntary Licensing of License‐Exempt Low‐Power Radio Apparatus in the TV Bands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>