Shenzhen Chinuo Technology CA900 Wireless Door Bell Instruction Manual

Shenzhen Chinuo Technology CA900 Wireless Door Bell

Product Information

Mode NO.: Wireless Doorbell no Battery RingtonesAvailable: 38 ring tones
Receiver Power:plug-in 100-240V home socket Working Frequency: 433MHZ±2MHZ Receiver Size: 110¼55¼25MM
Receiving distance: 1 OOM Remote (in open area)
3 Levels of Ringing Volume (25dB to 110dB)-
Just click the button to adjust the volume as needed.
Product color: White&Black (Optional)
Working temperature: -20G C – 70GC
Transmitter size: 55 x 60 x 20mm

Operation instructions

Transmitter&Receiver pairing

1. Long Press the Mule button on Receiver for 3 seconds lo prompt “Ding Dong”,Enter pairing mode

2. Press to the switch on the Transmitter, the receiver will get the sound of “Ding Dong”
   You can choose your favorite music before pairing (Support different Transmitter to operate different music) 3: Every time remote control Pair code time is 15 seconds, after 15 seconds will automatically return.
   Note: Power-off memory function
   Delete pairing

3. Remove the receiver power, Long press the Mute button for 3 seconds, then insert the power supply. When the receiver prompts two “Ding Dong’, then delet pairing is completed. If you want to reuse it,
   you must Pairing it again.

Transmitter installation procedure

1. install the remote control to the bottom plate as shown in the picture
2. Paste the matched 3M to the bottom plate,and then paste the remote control to the appropriate position
3. Fix the bottom plate in the proper position with matching screws
4. install the remote control to the bottom plate as shown in the picture

NOTE: Holdlh 3Madhniv for30Hconds, lh nr legal. Doorbclinst11lh:donthewall,not allow edin tallcdonmetalde>ors, securi1ydoors,stainleusteeld0or11.

Remote control Wireless Doorbell no Battery

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>