Vbet CS61 Wireless Conference Speakerphone User Manual
- June 5, 2024
- VBET
Table of Contents
Vbet CS61 Wireless Conference Speakerphone
Welcome
Thank you for using the CS61. We hope you will enjoy it !
CS61 features
- Immersive sound for calls and music
- Intuitive plug and play connectivity – connect to laptop, smartphone and tablet via USB or Bluetooth
- Integrated Busy light
- Light weight design, protective travel pouch, and 12 hours of battery life
- Flexible and scalable for small meetings
- Interact with your voice assistant with the one-touch voice assistant button
- Compatible with Avaya, Cisco Jabber and Skype for Business for a plug-and- play experience.
Overview
-
Bluetooth
-
Battery status
-
Answer Call
-
Volume Down
-
Power On/Off
-
Mute/ Voice assistant
-
Volume Up
-
End Call
-
Busylights
-
USB Cable
-
Table Stand
-
BT 100U
Where to position
Small meeting room
Position the speakerphone in the center of the table, up to 2m/6ft from each participant. A single CS61 is ideal for up to 6 people.
Desk
When using the CS61 at your desk it is recommended to put the speakerphone into an upright position using the table stand. This will better direct the audio towards you.
How to charge
USB charging
Plug the CS61 into a USB power source using the attached USB cable. The CS61 battery lasts for up to 12 hours of talk time and takes approx. 3 hours to fully charge.
Automatic power off
To preserve battery while unplugged, the CS61 will automatically power off when it has not been connected to a Bluetooth device for 15 minutes.
Battery status
To view the current battery status, press the Battery status button. The LED on the Battery status button， When the battery is full, the LED is Green, when the battery is medium, the LED is Blue, When the battery is low battery, the LED is Red, When the battery is very low battery, the Red LED is flashing.
Full battery
Medium battery
Low battery
How to connect
Connect to PC (Bluetooth)
Plug the BT 100U into a USB port on your PC. The CS61 and the BT 100U are pre -paired and ready to use out of the box. The bluetooth range is 30m.
For
the CS61 to work correctly you may need to set the BT 100U as the audio device
in your operating system’s audio settings.
To manually pair the CS61 with the BT 100U, please use UC Manager.
Connect to PC (USB cable)
Plug the CS61 into a USB port on your PC. You may need to set the CS61 as the playback device in your operating system’s audio settings.
Connect to smartphone
Hold the Bluetooth button for 2 seconds and follow the voice-guided instructions to pair to your smartphone. The Bluetooth range is 10m.
To disconnect or reconnect, Double tap the Bluetooth button again.
How to use
- Bluetooth
- Battery status
- Volume Down
- Answer Call
- Power On/Off
- Mute/ Voice assistant
- Volume Up
- End Call
- Busylight
Button visibility
The buttons are backlit and only visible when the speakerphone is powered on.
After 20 second of inactivity the buttons will fade, and can be reactivated by
tapping the area where the buttons are located.
The Voice assistant button, and Mute button will only be visible under certain
conditions (e.g. the Voice assistant button is only visible when the CS61 is
connected smart phone and not on call).
Typical use
The LED Light-Ring Status
WHAT
|
HOW
---|---
Power on or off| The LED light-ring flashes Green, Blue and Red
Incoming call| The LED light-ring Green breathing
On call| The LED light-ring glow Red
Mute| The LED light-ring red breathing
Low Battery| The LED light-ring flashes Red
Voice assistant button
By default, the voice assistant button will activate your smartphone’s voice
assistant (Siri®, Google Now™, Cortana™,Xiaoai,Xiaoyi).
When you press the voice assistant button, the button will turn Green light ,
and it will awaken the voice assistant.
Software
UC Manager
Download the latest version from vbet.cn/UCM
Update firmware
Firmware updates improve performance or add new functionality to VT devices.
- Connect the CS61 to a PC using the USB cable.
- Install UC Manager on your PC.
- Use UC Manger to check for the latest firmware updates.
Support
FAQ and technical specifications
View the FAQ, certifications, and technical specifications at vbet.cn /conference-speaker/
How to care for your VT device
- The CS61 is for indoor use only.
- Avoid storage at extreme temperatures (above 65°C/149°F or below -40°C/-40°F).
- Do not expose the CS61 to rain or other liquids.
- Do not cover the CS61 with stickers or labels.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: II) This device may not cause harmful
interference, and 11) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment should be installed and operated with minimum distance 10cm between the radiator you body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>