Xiamen Vbet Electronic VT 8200 UC Headset User Manual
- June 5, 2024
- Xiamen Vbet Electronic
Table of Contents
Xiamen Vbet Electronic VT 8200 UC Headset
User Manual
WELCOME
Thank you for using the VT 8200 Headset. We hope you will enjoy it!
VT 8200 FEATURES
- Busylight on the headset and the USB controller
- Discreet boom arm can fold neatly away into the headband when not on a call
- Superior music and voice capabilities
- Hi-Fi Sound
VT 8200 OVERVIEW
STEREO
MONO
HOW TO WEAR
LEFT OR RIGHT WEARING STYLE
The VT 8200 Duo can be worn on the left or right by rotating the microphone to
the other side (280° limit).
ADJUST THE HEADBAND
Adjust the headband to find the most comfortable fit.
POSITION THE MICROPHONE
It is recommended to position the microphone close to your mouth.
The microphone can be worn either on your left or right side.
STORING THE MICROPHONE
The discreet boom arm can fold neatly away into the headband when not on a
call.
HOW TO CONNECT
CONNECT TO PC
Plug the headset into a USB port on the PC.
HOW TO USE
CALLS
BUSY LIGHT
The busy light indicator on the headset can protect you from all interruptions
when you are busy.
MANUALLY TURN BUSYLIGHT ON/OFF
To manually activate the busy light on/off, tap the Answer/End button on the controller. The busy light can be activated even when you are not on a call.
SUPPORT
FAQ
View the FAQs on www.Vbet.cn/VT 8200.
HOW TO CARE FOR YOUR HEADSET
- Always store the headset with the power off and safely protected.
- Avoid storage at extreme temperatures (above 25°C/77°F or below -20°C/-4°F). This may adversely affect the headset.
TECHNICAL SPECIFICATIONS
| VT 8200 HEADSET | SPECIFICATION |
|---|---|
| Headset weight: | Mono headset 140g |
Stereo headset 188g
Headset dimensions:| Mono headset L196.3mm x W72.5mm x H189.1 mm
Stereo headset L196.3mm x W72.5mm x H191.1mrr
Controller dimensions:| L75mm x W2Omm
Microphones:| Noise-canceling microphone
Speaker| 40mm Dynamic PureSound
speakers (Hi-Fi)
Speaker maximum input
power:| 10mW
Speaker frequency range:| 20Hz — 20KHz
Cable length:| Controller to PC: 1.35m
Headset to Controller: 850mm
Operating temperature:| -10°C to 55°C
Storage temperature:| -20°C to 25°C
FCC Warning
two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Made in China
MODEL: VT 8200 Duo
FCC ID: 2AC67-8200