Realfit GoPods E3 Wireless Bluetooth Earbuds User Guide

: June 5, 2024
: Realfit

Table of Contents

Realfit GoPods E3 Wireless Bluetooth Earbuds
PACKING LIST
PRODUCT INTRODUCTION
INSTRUCTIONS
BASIC PARAMETER
WARRANTY
- Recycling Initiative
RF Exposure Information and Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Realfit GoPods E3 Wireless Bluetooth Earbuds

PACKING LIST

Earphone
Charging Box
Silicone protective sleeve
USB Charging Line
Product Introduction Guide

PRODUCT INTRODUCTION

Indicator Lamp
Multi-function Button
Charging Box
USB Input
Front Tuning Hole
Microphone
Charging Contact Pin
Back Tuning Hole
Touch Control Area

INSTRUCTIONS

Start-up

When the charging box is turned on, the earphone will turn on automatically.

Sleep mood

Put the headset back on the charging box, and close the charging box cover, then the headset will automatically disconnect and enter to the sleep mood.

Charging

Earphone Charging:
Put the earphone into the charging box and it will automatically enters the Charging mode.

Charging Box:
Connect the charging box and the USB adapter with the charging cable inside the box.

Check Charging Box Power
Check the headset battery status:
After connecting the phone you can check the headset power in the Bluetooth state.

Check the charging box battery status:
Open the charging box. The green indicator light will light on if the battery is fully charged, and the red indicator will light on if the battery runs low.
When charging the charging box, the indicator will light on, and it will stay on when fully charged.

Bluetooth Pairing

First time use: After opening the charging box, the headset will enter the pairing mode automatically.
Connect to a new device: Keep both headsets in the charging box, then open the charging box. Press and hold the touch control button for 3s, the headset will enter the pairing mode.
When the headset is paired, open the device’s Bluetooth list and search. Find “Realfit Gopods E3H and then click to connect.
Automatic connection: When the headset is turned on, it will automatically reconnect to the previous paired device.
Reset earphones: long press the paring key for 10 seconds ,and the earphones will clear the original paring record and reset.

Touch Operation

Double-click: Answer the phone, play/ pause the music.
Triple-click: Skip to the next song.
Press 2s during calling: Hang up.
Press both sides for 2s at the same time: Enter/ exit the game mode.

BASIC PARAMETER

Product Name	Realfit Gopods E3
Type Name	RT01
Charging Box Interface	Micro USB
Single Battery Life of Earphone	3 hours*

Use 50% volume during the test. The actual endurance time will vary according to the use scenario.

WARRANTY

Thank you for choosing Realfit accessories. We will provide comprehensive warranty services according to local laws and regulations. Warranty Coverage and Restrictions: For more details about our warranty policy, please visit (China) (other regions) www.realfit.net.cn.
Any of the following situations void the warranty:

The warranty has expired.
Independent disassembly, repair or modification of the product or not following the instructions.
Damage caused by force majeure (flood, earthquake, lightning, etc.)
No valid purchase vouchers ( sales invoices or receipts, etc.).
Natural wear and tear.
Non-product quality issues.

NOTES

Avoid exposure to liquid and high humidity environment.
Avoid throwing, crushing, or tossing as to prevent damage.
Avoid contact with strong magnets as to prevent the magnetic ear buds from being demagnetized. ~
Keep out of the reach of children. @
Do not attempt to disassemble the device. Please contact the I))(/ customer support for assistance.
For your safety, please do not use while riding a motorcycle or bike, during, or crossing the road.
For health reasons, avoid listening on high volume for extended periods.

RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation( 1999/519/EC). To prevent possible hearing damage, do not listen at high volume levels for long periods. Hereby, Realfit Gopods E3 declares that the radio equipment type RT01 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.realfit.net.cn

Manufacturer information:
Company name: Zhi Mei Shang Pin Technology(shenzhen) Co.,Ltd.
Address: Room A802, Building G4, TCL International E City, Shuguang Street,
Nanshan District, Shenzhen, Guangdong, China.
Operation temperature: -10~50oC
Operation frequency: 9dBm
Bluetooth: 2402-2480MHz

This symbol on the device, batteries (if included), and /or the packaging indicates that the device and its electrical accessories (for example, a earphone, adapter or cable), and batteries ( if included) should be disposed of as household garbage.

Recycling Initiative

Thank you for choosing . Our responsibility is not limited to showing you our products. We have been working in the field of safe disposal of electronic waste. For more details about our recycling program, please visit (China) www.realfit.net.cn (other regions). Call us: Toll Free No.-1800200 2450(China).

CAUTION

Risk of explosion if the battery is replaced by an incorrect type
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

RF Exposure Information and Statement

The SAR limit of FCC is 1.6W/Kg for head. The highest SAR value reported under this standard during product certification when used against the headis 0.076W/Kg. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.