CHUWI HeroBox Windows10 Mini Desktop Computers Small PC User Manual

CHUWI HeroBox Windows10 Mini Desktop Computers Small PC

Service Assurance
Thank you for purchasing this product. You can enjoy one-year free spare parts and manual service assurance provided by our company.
The following conditions lead to the need for our company to provide services,a nd the maintenance fees will be charged as appropriate:
Failure to perform proper operations according to the user manual or instructions.
Man-made damage, computer viruses, dampness, improper software installation or self-disassembly, etc.
Fire, flood, wind, earthquake and other irresistible forces.
Abrasive wear caused by accessories, consumables and natural use
If we need to re-install software or adjust computer settings on our behalf, we will charge fees as appropriate.
Our company provides warranty for the damaged or dirty logo which may result in un-recognizability.
Before the product is repaired, please make a separate backup of

Product Interface Description

1. Power input
2.  Network interface
3. LED Power Indicator)
4. Type-C
5. SD card(expansion slot)
6. VGA interface
7. Reset button
8. D port
9. Headphone
10. US83.0
11. Pawer Button
12. Bracket buckle
13. SB2.0
14. reset button

Instructions

1. Connect the device with the display device (such as TV, screen, projector, etc) via HD line, and select the ‘video input source” of the display device to the connected HD input channel.
2. DC-IN power supply: Connect the DC-IN interface of the power cord of the accessories to the device and insert the other end directly into the plug.
3. Use the device by connecting it with a wired or wireless keyboard and mouse via USB port.
4. Press the power button to start the system.

Power Adapter (factory accessories)
It can be used with Bluetooth or wireless keyboard and mouse (self-provided)

HD installation

1. Turn HeroBox upside down and remove the six fixing screws on the back as shown in the figure below. When removing the rear cover, the metal brackets on both sides of the HDD bin can be seen. Tear them down.
2. Install the metal bracket on both sides of the 2.5-inch HDD. Place the metal bracket and the HDD together into the HDD installation position of HeroBox. Install the fixing screws and pay attention to the direction of the HDD data interface.
3. Install the rear cover back into HeroBox and screw up the fixing screws.
   Tip: The newly loaded HD must be initially operated before it can be identified by the system. The above operations require a certain knowledge of computer maintenance. It is recommended to install it at a professional after- sale maintenance site.

The intention of HDD Installation:

1. HDD installation position of HeroBox
2. Rear cover of HeroBox
3. 2.5 inch HDD

Packing List

1. Computer Box”1
2. User Manual(Warranty Card)!1 Certificate 1
3. Power Adapter “1
4. Remote Controller *1 (Optional)
   VESA Display Bracket 1

NOte

1. this low-power R motor is a certified arnd quality product. Companies, businesses or individuals may not change the frequency to enhance the power or change the characteristics and functions of the original design without permission.
2. Law-frequency k motors should not atrect diligent safety and interfere vith legitimate communication when they are USed. whe interference is found, they should be stopped using immediately and bc improved to no interference before they can continue to be USCO. Climate communication errors to wireless communication in the wOIK prescribed by law, Low-frequency motors must bc able to tolerate the interference of legitmate communication or electromagnetic radiation motor equipment for industrial, scientpfic
3. This product contains miniature batteries for mainboard CMOS, which cannot be replaced by consumers themselves. It may be dangerOus if consumers replace incorrect types of batteries by themselves. Please properly handle the battery replacement.

Attention

1. This product is suitable tor places below 3000 meters abOve sea level; this product is only suitable for non-tropical areas.
2. be very careful when performing operations that may cause damage or loss bottles. PowE re or e mn pe system, he nard disk scanning should be carried out as soon as possible to repair the errors in time.
3. When the mini pc boots, vie should pay attention to the defense or the virus and try to use the virus firewall.urn on the dsplay. printer, and other peripherals first, and finally turn on the devIce.
4. Turn ofr the device first, then turn oft the display.
5.  you do not use the device tor a long time, Turn ott the main power swtch.
6. ative humidity is 30-B0%.
7. The device should not be powered off for a long time (e.g. 1 3 months) before using it
8. The device should not be turned on or of frequently, the time interval between two boots should be at least 10 seconds, preferably no less than bu seconds.
9. You can’t move the device or turn off the pover while reading/writing to the hard disk, Wait for about 30 seconds after shutting9
10. Pay attention to dust control, keep the environment clean and hygienic. and wipe it with a dry soft cloth.
11. AvOI rcct exposure or stong gnt O the dece. and oo not put itncor tne strong magnetic clo.
12. Don’t get water, food, and other fluids onto the device, and don’t puill the data and power lines with force
13. Rationally arganize the directory structure of the disk and alays keep a copy of important things on the hard disk.

FCC warning

changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate This device complies with part 15 ol the FCC Rules. operation is subject la lhe allowing Low Condi lions: his device may not cause harmruin terrerence. ana this device must accept any interference receved, InciuangnterTerence tnat may cause undesired operation.
art 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there isS no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined ana on. tne user is encourage to tuy to correct tne interference by one or more
of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
• Consult the dealer or an experienced radio/TV technician for help.

his equipment complies with FCC radiation exposure limits set torth tor an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>