CHUWI CoreBox Pro Ice Lake Mini PC User Manual

User manual

Service Assurance

Thank you for purchasing this product. You can enjoy one year of free spare parts and manual service assurance provided by our company. The following conditions lead to the need for our company to provide services, and the maintenance fees will be charged as appropriate. Failure to perform proper operations according to the user manual or instructions.
Man-made damage, computer viruses, dampness, Improper software installation or self-disassembly, etc.
Fire, flood, wind, earthquake, and other irresistible forces.
Abrasive wear is caused by accessories, consumables, and natural use. if we need to re-install software or adjust computer settings on our behalf. we will charge tees as appropriate.
Our company provides a warranty for the damaged or dirty logo which may result in un-recognizability. Before the product is repaired. please make a separate backup of your personal data and tiles, which may affect the integrity of the data during the process of maintenance The company guarantees maintenance services so that you can buy and use It at ease.

Product Interface Description

1. USB3 0’4 7. OP Port
2. R.145 Networ102
3. Audio Interface
4. DC power input
5. HOMI Port
6. Microphones lack
7. Dp port
8. Type-c part
9. Power Button

Instruction

1. Connect the device with the display device (such as TV. screen. projector, etc) via 1-IDMI line, and select the ‘video input source’ of the display device to the connected  lidar input channel
2. DC-IN power supply Connect the DC-IN interface of the power cord of the accessories to the device and insert the other end directly into the plug
3. Use the device by connecting it with a wired or wireless keyboard and mouse via a USB port
4. Press the power button to start the system

Power Adapter (factory accessories)
It can be used with Bluetooth or a wireless keyboard and mouse (self-on: waded)

Mainboard Explanation

1. SATA interface
2. SATA2 power supply input
3. M.2 SSD
4. Power Input of the Fan
5. On-Off Switch interface/Lamp

HD installation

1. Remove the four back screws and back cover When the back cover is removed, the HD bracket (the HD bracket is fixed with the back cover) can be seen as shown in Figure 1/2.
2. Remove 4 screws and remove the bracket. Install the HD on the bracket to fix the HD and bracket with 4 screws Insert SATA brie as shown in Figure 3/4
3. Install 4 screws to fix the HD and bracket on the back cover
4. Connect SATA line and power cord, install the back cover on GT, and fix the screws Tip: The newly loaded HD must be initially operated before it can be identified by the system The above operations require a certain knowledge of computer maintenance. It is recommended to install it at a professional after-sale maintenance sate

The intention of HD Installation

A. Rear cover of CoreBox
B. HD Bracket of CoreBox
C. 2 5 inches hard desk

Packing List

Note

1. This low-power RI motor is a certified and qualified product. Companies. businesses or individuals may not change the frequency, enhance the power or change the characteristics and functions of the original design without permission.
2. Low-frequency RF motors should not affect flight safety and interfere with legitimate communication when they are used When interference is found, they should be stopped using immediately and be improved to no interference before they can continue to be used Legitimate communication refers to wireless communication in the work prescribed by law Low-frequency RF motors must be able to tolerate the interference of legitimate communication or electromagnetic radiation motor equipment for industrial, scientific and medical purposes.
3. This product contains miniature batteries for mainboard Cfvt0S. which cannot be replaced by consumers themselves It may be dangerous if consumers replace incorrect types of batteries by themselves Please properly handle the battery replacement.

Attention

1. This product is suitable for places below 3000 meters above sea level; this product is only suitable for non-tropical areas.
2. Be very careful when performing operations that may cause damage or loss of files.
3. After abnormal withdrawal or accidental power failure of the mini pc system. the hard disk scanning should be carried out as soon as possible to repair the errors in time
4. When the mini pc boots, we should pay attention to the defense of the virus and try to use the virus firewall.
5. Turn on the display. primer, and other peripherals first and finally turn on the device. Turn off the device first, then turn off the display.
6. If you do not use the device for a long time. turn off the main power switch.
7. The deal working temperature of the device is 10-35 degrees.. and the relative humidity is 30-80%.
8. The device should not be powered off for a long time (eg. 1-3 months) before using it
9. The device should not be turned on or off frequently; the time interval between two boots should be at least 10 seconds, preferably no less than 60 seconds.
10. YOU can’t move the device or turn off the power while reading/writing to the hard disk. Wait for about 30 seconds after shutting down it.
11. Pay attention to dust control. keep trie environment dean and hygienic, and wipe it with a dry soft cloth.
12. Avoid direct exposure of strong Eight to the device, and do not put it near the strong magnetic field.
13. Don’t get water. food and other fluids onto the device, and don’t pull the data and power lines with force.
14. Rabonally organizes the directory structure of the disk and always keep a copy of important things on the hard disk.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>