Ohsnap WC-SC1 Wireless Snapcharger User Manual
- June 5, 2024
- ohsnap
Table of Contents
SNAPCHARGE
MAGNETIC WIRELESS CHARGER
NOTE:
For full 15W charging speeds, make sure to use a 15W power brick (or the one
your phone came with).
HOW TO USE
Plug snap charge into power brick or USB Port. Make sure your oh snap grip and
snap charge notches are semi-aligned, then bring your phone close without
making contact. The magnets will automatically pull the two together while
auto-aligning them.
FAST CHARGE INFO
Snapcharge supports 15W fast charging. Different brands have different names for it – Dash Charging, Speed Charging, Quick Charging, etc. Snapcharge supports all types, but your phone may throttle it based on your battery percentage, power source, or phone case.
TROUBLESHOOTING
PLUGGED IN?
Check the connections to snap charge and the power brick, confirming they’re
snug and cables are pressed in all the way.
CASE THICKNESS
Thick cases increase the distance between the snap charge and your phone and
can slow or prevent the charging process altogether.
PHONE COMPATIBLE?
Make sure your phone actually has wireless charging capabilities. Google “Does
(your phone) have wireless charging?”
OHSNAP CENTERED?
Ohsnap must be centered on your phone to support wireless charging. All phones
have their wireless charging coils directly in the center of the device, and
ohsnap must surround that coil for it to charge. Go to ohsnap.com/tutorial for
a guide on centering your ohsnap.
PHONE ON?
For a quicker wireless charge, make sure your phone is powered on.
FCC Statement
T h is equipme n t complies with FCC R F radia t ion e expo Sur e li m it s
set for t h fo r a un con trolled en vi r one t.
This equipment should be installed and operated with a minimum distance of 2
0cm between the radiator & your body.
T his dev i ce comp l i es with Part 15 o f t he FCC R rules, oper at io n is
sub j ec t t o the follow ing two cond i tion s : ( 1 ) T his dev ic e ma y no
t ca us e ha harmful l into r ference, and (2 ) this dev items tac cep t any
interference received, includ i ng in te r f e r enc e t ha t ma y cause undes
i read oper a to n.
-
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
o f the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.