Fuji Film 01000011 Embedded Wireless Module User Manual

Fuji Film 01000011 Embedded Wireless Module

For FCC

Contains Transmitter Module FCC ID: W2Z-01000011 or Contains FCC ID: W2Z-01000011
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *If it is difficult to describe this statement on the host device due to the size, please describe in the user’s manual and also either describe on the device packaging or on a removable label attached to the device. [for ISED(IC)] Contains IC: 7736B-01000011

• FCC CAUTION
  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Co-Location Rule
  This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

• List of applicable FCC rules
  This device complies with part 15 of the FCC Rules. Part 15 Subpart C Part 15 Subpart E

• Additional testing, Part 15 Subpart B disclaimer
  The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.

• Summarize the specific operational use conditions
  This module is designed for mounting inside of the end product by us professionally. Therefore, it complies with the antenna and transmission system requirements of §15.203.

• RF exposure considerations
  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from the person’s body.

List of Antennas

Manufacturer| Model| Antenna type| 2.4GHz Gain| 5GHz Gain
---|---|---|---|---
MOLEX| 146153| PCB| +3.25dBi| +5dBi

1. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
2. This device may not cause interference.
3.  This device must accept any interference, including interference that may cause undesired operation of the device.

For indoor use only

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from the person’s body.

This radio transmitter (7736B-01000011) has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device

Documents / Resources

| Fuji Film 01000011 Embedded Wireless Module [pdf] User Manual
01000011, W2Z-01000011, W2Z01000011, 01000011 Embedded Wireless Module, Embedded Wireless Module
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>