Seeger SAC7000 Mobile Air Conditioner User Manual
- June 8, 2024
- Seeger
Table of Contents
- Seeger SAC7000 Mobile Air Conditioner
- INTENDED USE
- SAFETY
- PREPARATIONS FOR USE
- FUNCTIONS
- INSTALLATION
- OPERATION
- CLEANING AND MAINTENANCE
- TROUBLESHOOTING
- TECHNICAL SPECIFICATIONS
- DISPOSAL OF USED ELECTRIC AND ELECTRONIC EQUIPMENT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Seeger SAC7000 Mobile Air Conditioner
INTENDED USE
The air conditioner is intended for cooling and removing moisture.
Read the manual carefully before the first use.
SAFETY
Labels in this manual
- WARNING A warning means that injury is possible if the instructions are not obeyed.
- CAUTION A caution means that damage to the equipment is possible.
- A note gives additional information, e.g. for a procedure.
Safety features
Automatic defrost
When the frost builds up on the evaporation filter, the appliance starts
defrosting. The power button blinks.
Overload protection
In the event of a power loss, the overload protection switches the appliance
off. The appliance switches on after 3 minutes.
General safety instructions
General
- To prevent damage or malfunctions: Please take time and read the general safety instructions. This will avoid fire, explosions, electric shocks or other hazards that may result in damage to property and/or severe or fatal injuries.
- The manufacturer is not liable for cases of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions. In such cases, the warranty will be voided.
WARNING
This product can be used by children aged 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the
use of the product in a safe way and understand the hazards involved. Children
shall not play with the product. Cleaning and user maintenance shall not be
done by children without supervision.
- Do not open the refrigerant loop.
- If the refrigerant leaks, immediately evacuate all persons in the room. Ventilate the room and contact the local fire department to inform them about the propane leakage. Do not enter the room until a qualified technician declares the room safe. Do not use a lighter, cigarette, or another flammable item near the room.
- Only use R-290 (propane) gas as the refrigerant.
- Do not get refrigerant in your eyes, on your skin or on your clothing.
- Do not put force on the appliance.
- Always check that the mains voltage corresponds to the voltage on the rating plate.
- Only use original accessories from the manufacturer.
- Do not spill any liquid on the appliance.
- Never leave children unattended with the packaging material. The packaging material represents the danger of suffocation. Children frequently underestimate the danger. Always keep children away from the packaging material.
- It is not permitted to open the product yourself or to have it opened, nor is it permitted to repair the product yourself or to have it repaired. This will void the warranties. Let any maintenance be carried out by certified maintenance personnel.
- Do not block the ventilation holes.
- Do not insert any objects in the ventilation holes.
- Power cords should be placed so that they cannot be walked on and they cannot easily become trapped due to items resting on or against them. Pay particular attention to the power cords at plugs, sockets, and points where the cords exit the product.
- Disconnect the appliance from the power source during service or when not in use.
- Do not operate the appliance with wet hands.
- Do not leave the appliance unattended.
- Do not unplug the appliance during operation.
- Do not operate the appliance when damaged.
CAUTION
- Do not place the appliance near a heat source. This could damage the appliance.
- Place the appliance on a horizontal flat surface.
Remarks
We recommend that you retain the original carton and packaging materials in
case it ever becomes necessary to return your product for service. This is the
only way to safely protect the product against damage in transit. If you do
dispose of the carton and the packaging materials, please remember to recycle
with due care to the environment.
PREPARATIONS FOR USE
Unpacking
- Unpack the appliance carefully.
- Check the package contents as described below. If any item is missing, please contact your reseller.
We recommend that you retain the original carton and packaging materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit. If you do dispose of the carton and the packaging materials, please remember to recycle with due care to the environment.
Package contents
If any item is missing, please contact your reseller.
The following items are included in the received package:
- Exhaust hose
- Hose connector
- Window kit adapter
- Window kit
- Remote control
- Air conditioner
- User manual
FUNCTIONS
- Control panel
- Adjustable air outlet
- Handle
- Castor wheels (4x)
- Air inlet with air filter
- Air exhaust
- Drain
- Power cable
- Timer button
- Speed button
- Speed indicator
- Display
- Arrow button down
- Arrow button up
- Mode indicator
- Mode button
- Power button
- High button
- Low button
- Sleep button
- Cool button
- Dry button
- Fan button
- Change unit button
- Hose connector
- Window kit adapter
- Exhaust hose
- Window kit
INSTALLATION
Placing the appliance
- The appliance shall be installed, operated, and stored in a room with a floor area larger than 7m2.
- Place the appliance on a horizontal flat surface.
- Keep a minimum (of 50 mm) space around the appliance for optimal ventilation.
- Do not place the appliance near a heat source. This could damage the appliance.
- Do not expose the appliance to direct sunlight.
- Do not install the appliance where it could be subjected to:
- Mechanical vibration or shock
- Excessive dust
- Lack of ventilation, such as cabinet or bookcase
- Make sure the air inlet and outlet are not blocked, or close to loose objects e.g. curtains.
If the appliance is tipped more than 45°, let the appliance stand in an upright position for 24 hours before use.
Connecting the exhaust hose
Do not extend the exhaust hose with another hose.
- Connect the hose connector to the exhaust hose.
- Make sure to fully extend the exhaust hose.
- Connect the window kit adapter to the other end of the exhaust hose.
- Extend the window kit to fit the window opening.
- Lock the window kit between the window and the window frame.
- Connect the window kit adapter to the window kit.
- Connect the hose connector to the air exhaust of the appliance.
OPERATION
- Press the power button to switch on the appliance.
- The appliance switches on after 3 seconds.
- Press the mode button to select the desired operation mode. The different modes are:
- Cool: air circulation and cooling
- Dry: low air circulation and dehumidifying
- Fan: air circulation without cooling
- Repeatedly press the speed button to select the desired speed.
- Use the arrow buttons to set the desired temperature.
- Press the power button to switch off the appliance.
- The appliance switches off after 10 seconds.
Sleep mode (remote control)
The sleep mode can only be activated in cool mode.
- Press the sleep button on the remote control. Every hour the temperature increases by 1°C.
Using the timer
- When the appliance is switched on, the timer works as a shut timer and vice-versa.
- To cancel the timer, press the power button or press the arrow buttons repeatedly until the display shows ’00’.
- Press the timer button to switch on the timer function.
- Use the arrow buttons to set the timer. The display shows the set time.
Storage
- Unplug the power cable and the window kit.
- Drain the water from the appliance.
- Clean the filter.
- Store the appliance in an upright position in a dry place.
CLEANING AND MAINTENANCE
- Turn the appliance off and remove the main plug out of the socket before you start cleaning the device.
- It is not permitted to open the product yourself or to have it opened, neither is it permitted to repair the product yourself or to have it repaired. This will void the warranties. Let any maintenance be carried out by certified maintenance personnel.
- Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution.
Draining the appliance
- Draining is only needed in dry mode.
- The appliance shuts off automatically when the reservoir is full.
- You can also drain the appliance automatically by attaching a drain hose to the drain.
- Place a drain reservoir on a lower level than the drain.
- Carefully place the appliance above a sink.
- Open the drain.
- When the appliance is drained, close the drain.
Cleaning the filters
Do not touch the evaporation filter with bare hands.
- Remove both filters from the appliance.
- Clean the filter with a vacuum cleaner.
- Rinse water through the filter in the opposite direction of the airflow.
- Let the filters completely dry before reïnstalling
TROUBLESHOOTING
Problem | Possible cause | Solution |
---|---|---|
The appliance does not switch on. | The power cable is not connected | |
correctly. | Reconnect the power cable. |
The water level in the reservoir is too high. The water level indicator lights
up.| Empty the reservoir.
The room temperature exceeds the working range.| Make sure the room
temperature is between 5
– 35 °C.
The appliance runs with reduced capacity.| A low fan speed is selected or the
appliance runs in dry mode.| Select another mode or another fan speed.
The air filters are blocked.| Remove objects from the air filters. When
necessary, clean the filters.
There is an open door or window.| Close all doors and windows.
The exhaust hose is detached.| Re-attach the exhaust hose.
Water leakage occurs.| The appliance has leaked while moving.| Be careful when
moving the appliance.
The drain hose is leaking.| Replace the drain hose.
The drain hose is kinked or clogged.| Straighten the drain hose. Unclog a
clogged hose.
The appliance makes excessive noise.| The appliance is not placed on a flat
and stable surface.| Choose a suitable location for the appliance.
Loose parts are vibrating.| Tighten loose parts.
The noise sounds like flowing water.| This sound is coming from the
refrigerant and is normal.
If the above solutions do not resolve the problem, please contact your reseller.
Error codes on the display
Error code | Possible cause | Solution |
---|---|---|
E0 | Communication fault between PCB and display. | Contact your reseller. |
E1 | The temperature sensor is broken. | |
E2 | The coil temperature sensor is broken. | |
Ft | The high water level in the reservoir. | Empty the reservoir. |
TECHNICAL SPECIFICATIONS
- Cooling capacity: 7000 Btu
- EER: Class A
- Power supply: 220 – 240 V / 50 Hz
- Sound pressure level: ≤54 dB (A)
- Sound power level: ≤65 dB
- Rated input (cooling): 780 W
- Rated current (cooling): 3.5 A
- EER for cooling: 2.61
- Refrigerant/Charge: R290/120g
- Dehumidifying capacity: 19.2 L / day
- Air circulation: 290 m3/h
- Body size: 300 x 300 x 700 mm
DISPOSAL OF USED ELECTRIC AND ELECTRONIC EQUIPMENT
The meaning of the symbol on the material, its accessory, or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipment waste. In the European Union and other European countries, there are separate collection systems for used electrical and electronic products. By ensuring the correct disposal of this product, you will help prevent potentially hazardous to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product. The recycling of materials will help conserve natural resources. Please do not, therefore, dispose of your old electrical and electronic equipment with your household waste.
For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.
Elmarc B.V. | Kolenbranderstraat 28 | 2984 AT | Ridderkerk | The Netherlands | myseeger.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>