Shenzhen Yuanguanghao Electronics YGH5244 Wireless Charging Alarm Clock User Manual

Shenzhen Yuanguanghao Electronics YGH5244 Wireless Charging Alarm Clock

OVERVIEW

It is not only a wireless charger cover 5W, but also a bedside alarm clock with digital LED display, 4 level brightness control, 12/24 hours format selection and snooze function. The power of the clock adopts electromagnetic induction technology for power transmission, which is the biggest feature of this product. As long as you have a Qi standard device, you can use this clock for charging eg Qi standard mobile phones and cameras.

POWER ON

Plug one end of the cable into the TYPE-C port of the clock, and connect the other end to the adapter included. Then plug the adapter into the power, the clock starts to work.

MAIN FUNCTION

1. Wireless Charging Function
2. Clock Setting
3. Alarm Setting
4. Snooze Function
5. 4-level Brightness
6. 12 / 24 Hours Format
7. Reset
8. Time Memory

DIAGRAM

1. Green indicator light.
2. Red indicator light.
3. AM
4. PM
5. Time display.
6. Snooze.
7. Alarm.
8. Time setting (12/24 hours format)
9. Alarm setting(Turn the alarm on/off)
10.  –
11.  +
12. Reset hole.
13. Type-C port.
14. Snooze/Light button.

TIME SETTING

In time mode, press and hold button until the Hour flash, short press  + or  – button to adjust the hour, then press to save; and the Minute will flash, short press + or – button to adjust the minute, then press to save, the time is set.

Note
Long press the  + or – button to quickly adjust. If there is no operation in 10 seconds, the clock will automatically confirm and return to the time display mode. 

12/24 HOURS SWITCH

In time mode, press button to switch between 12/24 hours format. If 12 hour mode was selected, AM/PM will display on the screen.

ALARM SETTING

In time mode, press and hold button until Hour flash, then press + or – button to adjust the hour, press  to save and Minute will flash, press + or – button to adjust the minute, press to save, the alarm is set will display on the screen. It indicates that alarm turn on.

1. Long press the + or – button to quickly adjust.
2. If there is no operation in 10 seconds, the clock will automatically confirm and return to the time display mode.

TURN ON/OFF THE ALARM

• In time mode, short press the button to turn on or off the alarm function.
• ON:  icon will display on the screen.
• OFF: icon will disappear from the screen.

SNOOZE FUNCTION

When alarm is sounding, the whole screen flash, press the Snooze/Light button under the clock to enter into snooze function and temporarily stop the alarm, the  icon will display on the screen, and the alarm will sound again 9 minutes later.

TURN OFF THE ALARM

Press any button except Snooze/Light button to turn off the alarm.

TURN OFF THE SNOOZE

When the snooze function is actived, long press the Snooze/Light button to turn off the snooze function, the  icon will disappear from the screen.

BRIGHTNESS ADJUSTMENT

In time mode, Press the Snooze/Light button to adjust the brightness of the led display, It has 4-level brightness control 0%, 10%, 50%, 100%.
Default brightness: 50% medium brightness.

WIRELESS CHARGING FUNCTION

Connect the clock with the adapter, the red and green lights flash and then turns off, entering into the standby state of charging. After that, you just need put your smart phone on the center of wireless charger and it will work smoothly. When the phone is charging, the red indicator light stayed on.

RED/ GREEN LIGHT REMINDER

• Power On: Red/Green lights flash once.
• Standby: LED off.
• Charging: Red light keeps on.
• Full Charged: Android.
• Red light turns off and green light keeps on.
• IPhone Red light keeps on Alarm: Red/Green lights flash alternately.
• FOD foreign body detection: Red/Green lights flash alternately.

RESET OPERATION

Press a sharp object such as a toothpick into the Reset hole. The full screen will display for 2 seconds and then enter into the factory mode.

Factory Mode

• Default time: 12:00 AM; 12 Hour format
• Default alarm time: 6:00 AM
• Default alarm: OFF
• Default screen brightness: 50% medium brightness
• Default alarm duration: 5 minutes
• Snooze: 9 minutes
• Sound: BIBI

SPECIFICATIONS

• Time erros: ±30 seconds/month
• Alarm:1 group

WARM TIPS

This device supports mobile phones that comply with the Qi standard.

1. Please use the included adapter for wireless charging
2. When the red/green lights flash alternately, it means that a foreign object or a short circuit has been detected;
3. Please keep the equipment away from water and other flammable liquids;
4. It is not recommended to use while charging;
5. Compatible mobile phone devices, such as iPhone 8, iPhone X/Samsung S7 edge, S8/LG V50 and etc. If you are not sure whether the mobile phone supports Qi wireless charging, you can search and check it online

PACKAGE CONTENT

• 1 x LIORQUE Wireless Charging Alarm Clock
• 1 x TYPE-C Cable
• 1 x Adapter
• 1 x User Manual

SAFETY INSTRUCTIONS

When using the wireless charging clock, please pay attention to the following safety instructions:

1. The manufacturer will not be responsible for the product damage caused by improper use or handing of the product.
2. Please use the factory standard TYPE-C cable that come with the product.
3. Place your phone on the center of the clock to ensure stable charging.
4. Cases made of metal and attachments such as magnets, cards, and grips will interfere with charging.
5. Do not use your phone while the product is charging.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements
This equipment conplies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

References

• LIORQUE – LIORQUE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>