ecarPlug ECRF232C HF-RF Card and Transmits Receives Data Reader User Manual
- June 5, 2024
- ecarPlug
Table of Contents
ecarPlug ECRF232C HF-RF Card and Transmits Receives Data Reader
Overview
This device is a reader device that reads HF RE Card and transmits/receives data by connecting to the Host Interface through RS-232C. Through this document, we define the specifications of the terminal that performs the above role.
Composition
- Host Interface
- Send and receive data by connecting to the RS-232C port.
- Status display function
- Display the current status using LED
Use
- ID is identified and used in devices that require user recognition (e.g, electric vehicle charger)
Specification
- MCU
- STM32F042F6P6
- ARM® 32-bit Cortex®-MO CPU
- Internal 2 USART
- User Interface
- Status LED x 1
- Debug & Download Port
- USART 1 Port [5 Pin]
- FW Download GPIO Port (5 Pin)
- Power
- External 5 VDC
- Internal 33V LDO
FCC Compliance Statement
Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment on and of, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antennae -Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. The
antenna used for this transmitter must not transmit simultaneously with any
other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures
Mega-712, SKn Techno Park, 124, Sagimakgol-ro, Jungwon-gu, Seongnam-si,
Gyeonggi-do, Republic of Korea
TEL: +82-31-778-6181