netradyne D210 Fleet Dash Camera User Manual
- June 5, 2024
- netradyne
Table of Contents
netradyne D210 Fleet Dash Camera
Product Overview
Driveri™isan AIpoweredvisionbasedIoTsystem,soldasanaftermarketproducttofleets.
The device is installed in trucks/cars behind the rear-view mirror, and the
power is supplied from the car battery through a custom power cable.
When the vehicle is being driven, the road facing camera is enabled by
default, records and generates real time safety alerts to assist the driver.
The camera facing the driver / passenger is optional due to privacy
requirements and enabled at customers’ request. The recorded videos are
processed (using our patented machine learning algorithms) on the device
together with the other sensor data and can detect any events related to
driving behaviour and driver behaviour. The device has 2 buttons on the bottom
side of the device, when pressed creates alerts which are user generated. 2
LEDs on driver facing side indicate the current operational state of device &
also indicate privacy setting (driver facing camera recording status).
Features
- Octacore CPU + GPU / DSP for Edge computing
- Auto-grade ISP with 90+ dB of HDR performance and Full HD imaging
- Full HD Inward /driver facing camera with IR LED for night vision
- Connectivity – WiFi / BT
- 2 LED indicators to represent device state
- Integrated Mic & Speaker for alerts
- 2GB RAM + 64GB ROM, expandable up to 256GB
- Inertial sensors (Accelerometer & Gyro), Thermal sensor
Processor Specifications
CPU| 64-bit ARM® Octa Core
Video Encoding – H.265| 1080p
Video format| HD Videos for limited time (customizable) Low Resolution videos
for long term storage
Sensors| IMU – Accelerometer + Gyro, Temperature, Ambient Light
RAM & Storage
Storage| 64GB / 128GB eMMC
Expandable Storage| Up to 256GB via microSD
Camera Specifications
Camera| Outward| Inward
Pixel Size| 2.8μm OmniBSI-2 pixel| 3μm x 3μm
Dynamic Range| >90dB HDR| 72db
Field of View
|
74° (Horizontal)
57° (Vertical)
90° (Diagonal)
|
148° (Horizontal)
80° (Vertical)
168° (Diagonal)
Construction| 6G – Visible| 6G + IR Filter (Dual Band)
Wireless Connectivity & I/O
Wi-Fi| 802.11 b/g/n
Bluetooth| V5.0
---|---
Connectors| USB (with OTG support), Power Jack, microSD
Electrical Specifications
Input Voltage| 7V-17V
Input current (full operation)| 12V / 2A
Max Power Consumption| 24W
Signals Input – High Voltage
(Positive)
| +17V
Signals Input – Low Voltage
(Negative)
| 0v
Physical Dimensions
Length x Width x Height| 126mm x 71mm x 65mm
Colour| Black
Case Material| Polycarbonate (PC)
Power Cable Length| 3 meters
Power Cable Thickness| 4.5mm
OPERATING REQUIREMENTS AND CONDITIONS
The design of Netradyne D-210 complies with U.S. Federal Communications Commission (FCC) guidelines respecting safety levels of radio frequency (RF) exposure for Mobile devices.
RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimetres between the radiator and your body.
FCC PART 15 STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the
following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. See 47 CFR Sec. 15.105(b). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
REGULATORY INFORMATION
- Model name: Netradyne D-210
- Series Model: D-210A, D-211
- FCC ID: 2AM8R-D210 company number 23098
- IC : 23098-D210
FCC CAUTION STATEMENT FOR MODIFICATIONS
- CAUTION: Any changes or modifications not expressly approved by Netradyne could void the user’s authority to operate the equipment.
IC Caution:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for an
uncontrolled environments. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Warning
A vision-based platform designed to enhance driver safety within the
commercial vehicle market, Driveri™ focuses on identifying, recognizing, and
rewarding positive driver performance. The platform was developed to capture
every moment of the driving experience, delivering stronger value to each
driver, fleet manager, and a fleet’s bottom line. It does not replace the role
of the driver nor the functions a driver ordinarily performs. It does not
eliminate or decrease the need for a driver to stay alert and to obey all
traffic laws while operating a vehicle. Driveri is not an automated driving
assistance program and it does not act as a substitute for any aspect of
driver vehicle control or safe driving practices. Whether or not the device is
in use, it is always the responsibility of the driver to take appropriate
corrective action. The driver should never wait for the Driveri program to
provide a warning or coaching opportunity before taking measures to avoid an
accident. Failure to do so can result in serious personal injury, death, or
severe property damage.
While Driveri uses machine vision learning, artificial intelligence, and
algorithms, it cannot and does not guarantee 100% accuracy in the detection of
street signs, other vehicles, traffic lights, driving lanes, pedestrians,
weather conditions, nor in providing warnings of all potential road hazards.
Drivers should never solely rely on Driveri, but instead should rely on safe
driving practices and maintain control of the vehicle at all times.
Driveri may have limited to no functionality in certain conditions such as
inclement weather, low visibility, and certain road conditions. Always keep
the cameras and view of the device unobstructed and properly calibrated so as
not to inhibit the functionality of Driveri. Driving in certain conditions or
any interference with the device can result in false, few, or no alerts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>