CZUR 2AYK3AURAMATE Smart Scanner User Manual

: June 5, 2024
: CZUR

Table of Contents

CZUR 2AYK3AURAMATE Smart Scanner
Chapter I Product Introduction
Operation Instructions
FAQs and Troubleshooting
Ser vice and Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CZUR 2AYK3AURAMATE Smart Scanner

CZUR 2AYK3AURAMATE Smart Scanner
PRODUCT

Chapter I Product Introduction

Overview
Aura Mate is a brand new scanner. It is conﬁgured with high-performance ARM 4-core Cortex-A17 CPUs, high-deﬁnition sensors, uniform optics and network connection, and other hardware. It can be used as a table lamp that is radiation-free, has low-frequency ﬂashing, uniform light, multiple modes, as well as functions such as video call, sitting posture reminder, and high- deﬁnition scanning. It is suitable for oﬃce, family and individuals, teachers and students, and education and training industry.
The video call function allows real-time video chats as oﬃce meeting and between parents and children, and teachers and students, which can facilitate timely communication between the two parties and remote to solve problems in a timely manner.
The sitting posture reminder function reminds users to sit properly and prevents their eyesight and neck from being aﬀected.
The table lamp function can be controlled by the knob on the device or the APP on your smart phone. There are four table lamp modes: eye protection, computer, reading & writing, and natural light.
The device supports smart position correct, auto-cropping of scanned images, and multiple color modes optimizing. You may scan learning materials, books, test papers, archives, receipts, etc, and upload the scanned images to the cloud. Then You can view, edit, or share the images through the APP.
Product Dimensions

Product External View

Note:

holder, base, camera casing,
LED light, display module
HD CMOS camera
Knob switch
Press: press the knob to turn on/oﬀ the table lamp
Turn: turn the knob clockwise to enhance the brightness or anti-clockwise to reduce the brightness.
Microphone
LCD screen
Speaker
Video camera indicator
Video camera
Cooling holes
Networking button
Power indicator
The device starts automatically and the indicator is on when the device is connected to power supply.
Wi-Fi indicator
The indicator is oﬀ when the device is disconnected to the network.
The indicator is on when the device is connected to the network.
The indicator ﬂashes and then is oﬀ when the network is abnormal.
Touch button for video call
Video call indicator The indicator is shimmery when the video call function is available.
The indicator is bright when the video call is going on.
Touch button for scanning
Scanning indicator The indicator is shimmery when the scanning function is available
The indicator is bright when the scanning is going on.
Type B USB Port for connecting computer
DC Port for connecting power adapter (9V 1.5A) Foot pedal

Product Parameters

Parameters

| Bcoansiﬁcguration| Seignhseosrt:1re4sMolmuteioganp4i3xe2l0s*3240 SPVicdcaenonfinofgromfoartm:tMaJt:P≤G A3; scanning speed ≈ 1.0 s

Exi ptourrteforrmmaat::PJDPFG/WORD/EXCEL/Searchable PDF

---|---|---
Processor| ARM 4-core Cortex-A17
Camera| Camera for scanning, 14 megapixels
Camera for video call, 2 megapixels
LCD screen| 2.4 ” LCD screen
Tmaobdleelanmdp brightness| N(1a1t0u-r8a8l0lilgxh),tc(o1m10p-u8t0e0r l(x1)6, 0re-6a3d0inlgx)a, neydew-prirtointegction (115-850 lx)
Cteomloprerature of table lamp| Ncoamtupraultelirg(h3t00(408K0)0, Key),er- epardoitnegctaionnd(w39ri0t0inKg) (4000K),

Features

| Etaybel-eplraomtepction| Control by knob, remote control by APP
Scan| Cpolosuitdiosntocroargrecatnadnmd auntaog-ecmroepnptinogf iomfaimgeasg,essmart
Video call| Remote view, video call transfer
Sreitmtiinngdpeor sture| Sensitivity levels: High, medium, low

Packaging and Accessories

Name	Speciﬁcation	Quantity (pcs)

Main device

Foot pedal

| Aura Mate Pro

USB port, cable length 2.0 m

| 1

1

Color printing, 126 × 176 mm

| 1

1

---|---|---
User Manual| Left hand, right hand| 2
Finger cots

uetdtieng Started

1

| USB port, cable length 1.5 m|

Operation Instructions

Connect Device to Network

This device is conﬁgured and controlled by APP. Please download the APP from our oﬃcial website:
https://www.czur.com or you can scan the QR code to download the APP.
Install and run the “CZUR” APP, scan the QR code, and then connect the device to the network by following the instructions.

Table Lamp

Plug in the power adapter to connect the device to power supply, and the device starts automatically. Press the knob and the table lamp is on.
Turn the knob to control the brightness of the table lamp.
When the device is connected to the network, you can control the device by the CZUR APP.
Control the table lamp function by your smart phone (you can turn on or oﬀ the table lamp or adjust its color temperature mode).
There are four table lamp modes: eye protection, computer, reading & writing, and natural light. You can turn the table lamp on or oﬀ and adjust the brightness.
There are six levels of brightness for each color mode. Turn the knob clockwise to enhance the brightness or anti-clockwise to reduce the brightness. The brightness will be resumed to the default level each time you change the mode.

Sitting Posture Reminder

Plug in the power adapter to connect the device to power supply, and then the device starts automatically.
When the device is connected to the network, you can enable or disable the sittingposture function by the APP.
Tap the “Sitting Posture reminder” icon Sitting Postur e reminder to enter the sitting posture reminder interface.
Enter the “Record Standard Sitting Posture”. When the user is sitting properly in front of the device, press the record button to record the sitting posture into the device.
The user can adjust the volume of the voice reminder and the sensitiveness of the reminder by the APP.posture function by the APP.

Video Call

Plug in the power adapter to connect the device to power supply, and then the device starts automatically.
When the device is connected to the network, you can start a video call through the device or by the CZUR APP.
Video call initiated by device: Tap the video call icon on the device, call the mobile phone bound with the device. When the phone user answers the call, you can see the phone user through screen on the device.
Video call initiated by phone: Tap the icon in the interface. The device will receive the call and will answer the call automatically in 5 seconds.

Scanner Function
Scanning by APP on Your Phone 2.5.1.1 Preparation

Connect the device to power supply and the device will start automatically.
Scan the QR code to connect the device to the network.
Connect the foot pedal to the device base.
Unfold the black soft pad, align and connect the notch with the device base properly. Unfold the device until the camera casing is 90° to the base (see the ﬁgure).

Notes

Tap the icon to enable the scanning function. Check whether the LCD screen is fully covered by the black soft pad (The black soft pad must be properly placed, which is crucial for the algorithm function; otherwise, image processing error may occur).
Press the foot pedal to start scanning.

Function Introduction

on the device to enable the scanning function. You can see the preview image on the LCD screen.
Press the foot pedal with your foot to start scanning. The screen will display “scanned N images”, “uploading N images”.
Open the APP, tap the ﬁle icon in the lower right corner to enter the ﬁle management interface, and you can view, edit, or sort the images that have been uploaded.

Scanning by Client software on Computer
2.5.2.1 Preparation

Connect the device to power supply and the device will start automatically.
Connect the device to a computer with the USB cable.
Connect the foot pedal to the device base.
Unfold the black soft pad, align and connect the notch with the device base properly. Unfold the device until the camera casing is 90 ° to the base (see the ﬁgure).

Notes

Check whether the screen is fully covered by the black soft pad through preview area of the client end on the computer (The black soft pad must be properly placed, which is crucial for the algorithm function; otherwise, image processing error may occur).
Click the scan button on the client end of the computer or press the foot pedal to start scanning.
The default brightness of the LED light is at the brightest level. Turning the knob clockwise or anti-clockwise can adjust the brightness at six levels.
Open the client software on the computer, click the scan icon at the lower right corner to enter the scan interface. Select a color mode or processing mode on the right side. Click the scan icon and start scanning (Select a proper processing mode; otherwise, the scanning may be aﬀected).

FAQs and Troubleshooting

3.1 Video Call

The device cannot start and the power indicator is oﬀ.
Check whether the power socket is connected to power supply and whether the power adapter is properly connected.
Check whether there is a power failure or abnormal operation during the automatic ﬁrmware upgrade process. Please contact customer service if the ﬁrmware upgrade fails (contact information is listed on the last page of this document).
Video call fails.
Check whether the device is connected to the network.
Check whether the video call touch button indicator is on with shimmery light.
Touch the button again to restart the video call.

Scan

The device cannot start and the power indicator is oﬀ.
Check whether the power socket is connected to power supply and whether the power adapter is properly connected.
Check whether there is a power failure or abnormal operation during the automatic ﬁrmware upgrade process. Please contact customer service if the ﬁrmware upgrade fails (contact information is listed on the last page of this document).
The scanning function does not work when pressing the foot pedal.
Unplug and replug the USB cable of the foot pedal, or restart the device.
Check whether the device is connected to the network.
There are problems, such as distortion and deformation of images, or words on the images being stretched.
Make sure that the black soft pad’s notch is properly connected to the base, and the scan preview area is fully covered by the pad. Refer to section 2.1.1 in Chapter II.
The materials to be scanned shall be placed within the preview area. “Materials to be scanned” include test papers, homework, books, ID documents, ﬁles, and 3D objects.
Check whether there are any other objects except the “materials to be scanned”. Such objects may aﬀect the algorithm and the scanning eﬀect. For example, erasers, phones, and pens.
There is no image in the ﬁle management of the APP.
Pull down to refresh the interface.
Check whether the images have been uploaded through the number displayed on the LCD screen.
Check the network condition of your phone.
Check whether the device is connected to the network.
The CZUR software cannot be installed or errors occur during the installation in a computer.
XP, Win7, Win8, Win10, and Mac OS are supported.
Check whether the SN is correct.
Check and enable the anti-virus software and ﬁrewall on your computer. Close the anti-virus software or add trust. Close the ﬁrewall or lower the security level.
If you download the software at the oﬃcial website, please ensure that the software has been downloaded and then install it.
The SN is incorrect.
Check whether you have entered a correct SN. Letters and numbers shall be distinguished. There is no “1” in any SN.
When use Aura Mate and open the software for the ﬁrst time on a computer, there is no image, and the scan function does not work.
Replug the USB cable, restart the device or restart the client end on the computer.
Use another USB port of the computer, for the performance of each USB port of the computer is diﬀerent.
Exit anti-virus software, security guards, or defensive back-end software.
Check if the “Device Manager” of the computer recognizes the client end on the computer. If a yellow exclamation mark/unknown device appears, right click to update the driver or disable it ﬁrst and then turn it on, and then restart the software.
Use the “Device Manager” of the computer to disable other “Scanner”, “Monitor”, or “Camera”.

Table Lamp

The device cannot start and the power indicator is oﬀ.
Check whether the power socket is connected to power supply and whether the power adapter is properly connected.
Check whether there is a power failure or abnormal operation during the automatic ﬁrmware upgrade process. Please contact customer service if the ﬁrmware upgrade fails (contact information is listed on the last page of this document).
The CZUR APP is unable to control the table lamp.
Check whether the device is connected to the network.
Check whether the device is connected to the server. The device status is displayed in the upper left corner on the current page of the APP. If the status is oﬄine, it means that the device is not connected to the server. If the status is online, it means that the device is connected to the server, and you can control the table lamp with the APP.
The brightness of the table lamp cannot be adjusted.
Check whether the brightness is at the highest or lowest level. If it is at the highest level, the brightness cannot be higher, and if it is at the lowest level, the brightness cannot be lower.

Sitting Posture Reminder

The device cannot start and the power indicator is oﬀ.
Check whether the power socket is connected to power supply and whether the power adapter is properly connected.
Check whether there is a power failure or abnormal operation during the ﬁrmware upgrade process. Please contact customer service if the ﬁrmware upgrade fails (contact information is listed on the last page of this document).
There is no voice reminder.
Check whether the voice function is enabled. If not, connect the device to the network and then enable the function in the CZUR APP.
Check whether the video call camera is on, and whether the video call camera indicator is on.
The device keeps reminding the user about the sitting posture.
Check whether the table lamp is used by another user.
Check whether the positions of the table lamp and the user have been changed.
Record new standard sitting posture in the device if the table lamp is used by another user or if the positions of the table lamp and the user have been changed.

Ser vice and Statement

Dear user, thank you for using CZUR scanner. To protect your legal rights, please peruse and comply with the following standards and statements.
After Sales Services and Warranty

All after sales policy of this product shall be subject to the laws and regulations of the country. You may return the device within seven days after receiving the device if there is quality issue. We oﬀer one-year warranty.
The scope of warranty covers the scanner. Consumables and external view are not covered in the warranty.
We apologize for not issuing notices for subsequent upgrades or version updates of the product. CZUR reserves the right of ﬁnal decision on the interpretation of the above articles.
Exceptions to Warranty
This product can only be used in areas where the surrounding temperature is less than 40℃.
Failures or damages caused by incorrect installation or using the product in environments that exceed the speciﬁed work conditions (for examples, in places that are too hot or too humid).
Damages caused by using components not from our company or when users replace components by themselves.
Damages caused by natural disasters, accidents, or human factors.
Damages caused by inappropriate storage (including damages caused by rats or liquid inﬁltration).
Failures or damages caused by unauthorized repairs, modiﬁcations, or abuse carried out by users.
Damages caused by repairs carried out by unauthorized repair centers.
Other errors and failures caused by software installation or software settings, or problems and failures caused by computer viruses.er have been changed.

Contact
Get technical support and information by the following ways.
Firstly, you can contact local distributors if you know them. Secondly, you can contact us directly.
CZUR TECH CO., LTD.
9/F, North Wing, West Block, Shenzhen-Hong Kong Institution, High-Tech South 7th Rd., Nanshan District, Shenzhen, China.
Room 1001, Building A, Chuangye Mansion, No. 32A Huoju Road, High-Tech District, Dalian, China.
Manufacturer: CZUR TECH CO., LTD.
After-sales Address: 2/F, Building 2, Baoshi Technology Park, No. 12, Baoshi Road, Jiaoyitang Village, Tangxia Township, Dongguan City, Guangdong
Email: service@czur.com
Web: www.czur.com