CZUR StarryHub Wireless Smart 4K LED Projector User Guide

CZUR StarryHub Wireless Smart 4K LED Projector

Product Information

Specifications

• Front:
  • Projector Lens
  • Auto-focus Camera
• Rear:
  • Camera
  • Camera LED Indicator
  • LAN
  • HDMI
  • USB3.0
  • USB2.0
  • DC IN
• Upper Side:
  • Right:
  • Charging Dock
  • Mic. Array
  • Power Power LED Indicator

Product Usage Instructions

Power On/Off

To activate StarryHub, follow these steps:

1. Install the StarryHub unit.
2. Power on the unit.
3. Follow the steps shown on the projection screen to either register a new StarryHub account or log in with an existing account.
4. The 6-digit StarryHub account number is used as the ID for meetings launched by the StarryHub.
5. To receive video meeting invitations, it is recommended to keep StarryHub in Standby Mode. Only shut down and remove the power source if you are not going to use StarryHub for a long time.

How to Use the TouchBoard

The TouchBoard acts as a wireless controller for the StarryHub.
Follow these steps to use the TouchBoard:

1. Turn on the power button on the TouchBoard and the StarryHub main unit.
2. Long press the upper left corner of the TouchBoard for 3 seconds until the LED indicator blinks in blue color.
3. Put the TouchBoard back into the charging dock and wait for 10 seconds until the icons on the first row of the TouchBoard light up. Pairing is completed.
4. Tap on “Touch/Board” to switch between input methods (touch panel or keyboard).
5. Tap on the icons to switch between Starry OS main system, HDMI, and wireless screen projection signal sources.
6. To go back to the home page, long press the “Back” button.
7. In Touch mode, regular operations such as Slide, Click/Touch with 1 finger, Slide with 2 fingers, and Zoom in & out with 2 fingers are supported.
8. Refer to the label on the back side of the TouchBoard for more finger touch operations.

Frequently Asked Questions (FAQ)

Q: What does the symbol on the product indicate?

A: The symbol indicates DC voltage.

Q: What should I do with the product for recycling?

A: This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). It must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

Q: How can I activate StarryHub?

A: After installing the StarryHub unit, power it on and follow the steps shown on the projection screen to either register a new StarryHub account or log in with an existing account.

Q: Can I use StarryHub to join video meetings launched by other StarryHub accounts?

A: Yes, you can invite your StarryHub account number to join video meetings launched by other StarryHub accounts.

Q: How should I handle StarryHub when not in use?

A: It is recommended to keep StarryHub in Standby Mode to receive video meeting invitations. Only shut down and remove the power source if you are not going to use StarryHub for a long time.

Q: How do I use the TouchBoard?

A: To use the TouchBoard, turn on the power button on the TouchBoard and the StarryHub main unit. Follow the instructions provided in the user manual for pairing and operating the TouchBoard.

Thank you for choosing StarryHub, the all-in-one business conferencing system.
Since this is a new product style in video conferencing indus-try, we recommend you to go over this instruction before activating the StarryHub. So you can understand how Starry-Hub works and enjoy the video meeting experience.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is sub-ject to the following two conditions:

2. This device may not cause harmful interference.

3. This device must accept any interference received, including interfer-ence that may cause undesired operation.

4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
   This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver.
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement
     This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
     The symbol indicates DC voltage.
     RECYCLING: This product bears the selective sorting symbol for Waste electrical and electronic equipment ( WEEE ). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the envi-ronment.

StarryHub Main Unit

Front

Upper Side

Power On/Off

Power on
Connect the power source, the power indicator will turn red.
Then press the power button (for 1 second) until the indi-cator blinks in blue color.
When the power indicator turns blue (not blinking) and the screen lights up, StarryHub is ready for use.

How to activate StarryHub
After installing the StarryHub unit, power on, you can follow the steps shown on the projection screen to either register a new StarryHub account or log-in with an existing account.
This 6-digit StarryHub account number is also used as the ID of the meetings it launches.
You can also invite this account number to join video meet-ings launched by other StarryHub accounts.

Power off
When StarryHub is powered on, long-press the power button for 3 seconds. There will be a pop-up window on the screen so you can either shut down or reboot with TouchBoard or WriteBoard (StarryHub accessories).
Or you can long-press the power button for 10 seconds to shut down directly.

Standby
When powered on, press the power button or put the TouchBoard back to the charging dock to enter Standby Mode.
Note: If initial setting of the StarryHub is not finished yet, StarryHub will not enter Standby mode by pressing power button or putting back TouchBoard to the charging dock.

Wake up
In Standby Mode, press the power button or pick up the TouchBoard from the charging position to wake up Starry-Hub.
If the TouchBoard is not in charging position when in Standby Mode, move or pick up the TouchBoard will also wake up the StarryHub.

• It’s recommended to keep StarryHub in Standby Mode in order to receive video meeting invitations.
  Only shut down and remove power source if you are not going to use StarryHub in a long time.

TouchBoard

Front

Back

How to Use the TouchBoard

TouchBoard acts as a wireless controller to the StarryHub.
You can operate StarryHub with the TouchBoard easily.
Before using the TouchBoard, please turn the power button (on the back of the TouchBoard) to ON status.
Put the TouchBoard back to charging dock (on the top of StarryHub) after each use.

Pair the TouchBoard with the StarryHub

• TouchBoard and the StarryHub are paired by factory default. If you need pair them again, please do as follow steps:

  1. Power on StarryHub and the TouchBoard.

2. Long press on the upper left corner for 3 seconds until the LED indicator blinks in blue color.

3. Put the TouchBoard back to the charging dock, wait for 10 seconds until the icons on the first row of the Touch-Board light up. Pairing is completed.

Touch Panel / Keyboard

Tap on Touch/Board to switch input method (touch panel or keyboard).

Volume adjustment
Tap on V- V+ to adjust volume of the StarryHub.

Tap on to focus the projector lens automatically. Long press to use manual focus

Switch signal source

Tap on to switch between Starry OS main system, HDMl, and wireless screen projection signal sources.

Home

Tap on and back to home page, long press for APP selector.

Back
Tap to get back to previous page or previous operation.

Finger touch
In Touch mode regular operations such as “Slide”, “Click/Touch with 1 finger”, “Slide with 2 fingers” and “Zoom in & out with 2 fingers” are sup-ported.
Slide with ONE finger or Double click with ONE finger and slide :To move object.
Tab with two fingers Call out more options = right-click on computer mouse.
Slide vertically with three fingers: To switch between APPs. Slide left/right with three fingers Switch applications.

• Tab Shift + Space bar at the same time to switch key-board input language.
  *[Fn], [OPT], [CMD] can work on Windows and MacOS, but are NOT available on StarryOS.
• Check the label on the back side of the TouchBoard to see more finger touch operations.

Keyboard

In Board mode , keyboard will light up so you can use the TouchBoard as an input method.

Low Battery Status
“Low Battery” alert appears with the upper left indicator light keeps flashing red when Touchboard battery under 20%. Please put the TouchBoard back to the charging dock (the 3 pins on the top of StarryHub) to recharge.

More Features and Operations

StarryHub is designed for office room, with features for local meeting/presentation, online video meeting, meeting recording, big screen projection and so much more.
We also offer CZUR Cloud service, supplementary applica-tions and additional gadgets to make sure you can enjoy the video meeting experience from different type of terminals. You would need to register a CZUR account in order to use CZUR Cloud or these applications.

CZUR Cloud & Cloud File
Use your CZUR account to log in www.czur.cc on a com-puter.
You can upload or manage Cloud files and sync to Starry-Hub.

CZUR APP
· Scan QR code to download CZUR APP

Install CZUR APP from APP store on your mobile phone, add StarryMeeting Module in the APP.
After log in, you can join video meetings launched by Star-ryHub from CZUR APP on your phone.

StarryMeeting
Download and Install StarryMeeting application on your computer.
After log in, you can join video meetings launched by Star-ryHub from StarryMeeting on your computer.

Wireless Screen Casting
You can cast screen to StarryHub from various types of terminals by different types of operations.

• Apple devices: Airplay or Screen Mirroring.
• Android or Windows phones or tablets: Miracast (some of the models do not support).
• CZUR APP (smart phones): wireless screen casting func-tion.
• StarryMeeting (computer): wireless screen casting func-tion.
• ClickDrop: Wireless Screen Casting Gateway (CZUR gadget).

Reminder

• Do not remove the power supply when StarryHub is still on.
  Always power off StarryHub before removing power supply.

• Do not look directly at the camera lens or point the lens towards human eye when the lens is powered on, to avoid damage to the eyes caused by strong light.

• Do not obstruct or block the air inlet or outlet of the Starry-Hub, to avoid affecting the cooling process, which may cause damage to the electronic components.

• Do not use cloth or paper to wipe all the lenses to avoid damage to the lenses.

• You can use an air blower to remove dust on the lens sur-face.

• Do not touch the lenses regularly.

• Do not use detergent to clean the equipment to avoid cor-rosion.

• Keep the StarryHub and its accessories out of the reach of children.

• Please make sure to use the StarryHub in a dry and venti-lated environment.

• Do not store the StarryHub and its accessories under extreme temperature because extreme temperature will shorten the life of electronic parts.

• Do not put the StarryHub or its accessories into any drying machines or heating devices.

After-sale Service And Warranty

Thank you for choosing StarryHub and supporting CZUR. Please go over below so you can understand how
after-sales service works and what the warranty terms are.

1. All warranty terms and after-sales service are following the local laws and regulations in the territories of the CZUR authorized sellers.
   If there’s no specified laws or regulations in this territory, standard warranty is 12-month from the date of purchase for all hardware, excluding nature expiration, artificial damage, unusual breaks and terms listed below in non-warranty coverage.

2. Non-warranty coverage:

3. Standard working environment temperature should be within the range of 0~40 degrees Celsius,

4. Failure or damage caused by incorrect installation or use in non-specified working conditions (excessive tempera-ture, excessive humidity, etc.),

5. Damage caused by non-official parts or parts replaced by users without instruction or confirmation from CZUR support team,

6. Damage caused by disasters, accidents or human fac-tors,

7. Failure or damage caused by unauthorized disassembly, repair, modification, or abuse,

8. Damage caused by repairs performed by any none CZUR authorized parties.

Contact Information

Reach CZUR team via one of the following ways for sup-port or share your comments.

• Company Name: CZUR TECH CO., LIMITED
• Website: www.czur.com
• Sales Office: RM722, Block B, Podium of Building No. 12, Shenzhen Bay Eco-Technology Park, No. 10 Gaoxin South RD., Nanshan District, Shenzhen, 518063, China.
• Office line: 0086-755-23974826
• E-mail address: support@czur.com
• Software Center: Room1001,10th Floor, Block A, No.32A Huoju Road, High-tech Industrial Zone, Dalian City, Liaoning Province, China
• Factory Address: 6th Floor, Building E, Huihong Industrial Park,No. 170 Jinxiaotanghuancun Road, Fenggang Town, Dongguang city, Guangdong province, 523690, China.

The terms HDMI and HDMI High-Definition Multimedia Inter-face, and the HDMI Logo are trademarks or registered trade-marks of HDMI Licensing LLC in the United States and other countries.

CZUR all rights reserved.

References

• czur.cc
• Smart & Professional Book Scanner with Digitization Solutions - CZUR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>