NARWAL T10 Vacuuming and Mopping Robot User Manual
- June 5, 2024
- NARWAL
Table of Contents
T10 Vacuuming and Mopping Robot
YC-BC-S00023-00-01
Thank you for buying Narwal product. To fully access our services, please read this manual and related diagrams carefully before using this appliance. Please keep this manual properly. This product is continually being updated, so there may be some differences between your actual product and the specifications in this manual.”
11 21
41 47 61
When using an electrical robot, basic precautions should always be followed,
including the following : READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)
WARNING To reduce the risk of fire, electric shock, or injury: 1. Do not
leave appliance when plugged in. Unplug from outlet when not in use and before
servicing. 2. This appliance is provided with double insulation. Use only
identical replacement parts. See instructions for Servicing of Double-
Insulated Appliances. 3. SERVICING OF DOUBLE-INSULATED APPLIANCES A double-
insulated appliance is marked with one or more of the following: The words
¤DOUBLE INSULATION¤ or ¤DOUBLE INSULATED¤ or the double insulation symbol
(square within a square).
In a double-insulated appliance, two systems of insulation are provided
instead of grounding.No grounding means is provided on a double-insulated
appliance, nor should a means for grounding be added to the appliance.
Servicing a double-insulated appliance requires extreme care and knowledge of
the system, and should be done only by qualified service personnel.Replacement
parts for a double-insulated appliance must be identical to the parts they
replace.
35 C/95 F
-20 C/-4 F 5 C/41 F 30 C/86 F
130 C/266 F
70 C/158 F
0 C/32 F
· Do not leave appliance when plugged in. Unplug from outlet when not in use
and before servicing. · Use extra care when cleaning on stairs. · Do not use
without dust bag and/or filters in place. · Prevent unintentional starting.
Ensure the switch is in the off-position before connecting to
battery pack, picking up or carrying the appliance. Please do not touch the
power switch when holding the robot or the base station. Please do not hold
the robot or the base station while they are charging. · Disconnect the
battery pack from the appliance before making any adjustments, changing
accessories, or storing appliance. Such preventive safety measures reduce the
risk of starting the appliance accidentally. · To maintain product safety,
service must only be performed be a qualified repair person using identical
replacement parts.
SAVE THESE INSTRUCTIONS
The laser distance sensor of this product meets the standards for Class I
Laser Products in IEC 60825-1: 2014 and will not generate hazardous laser
radiation Note:This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception , which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antennaIncrease the separation between the
equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer or
an experienced radio/TV technician for help. This device complies with Part
15of the FCC Rules.Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. L’ émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d’ Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’
exploitation est autorisée aux deux conditions suivantes: (1) L’ appareil ne
doit pas produire de brouillage; (2)L’ appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
FCC/IC RF RADIATION EXPOSURE STATEMENT CAUTION:
To maintain compliance with the FCC’s RF exposure guidelines, place the
product at least 7.9”from nearby persons. Pour rester en conformité avec les
consignes d’exposition aux RF, placez le produit à au moins 7.9” des personnes
proches. To maintain compliance with the FCC’s RF exposure guidelines, place
the product at least 7.9” from nearby persons. Pour rester en conformité avec
les consignes d’exposition aux RF, placez le produit à au moins 7.9” des
personnes proches.
CAN ICES-003 (B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:1.This device may not
cause interference. 2.This device must accept any interference, including
interference that may cause undesired operation of the device. Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Please turn off the robot and remove the battery before you abandon the
product. Do not discard or place battery scraps casually but hand them to
professional recycling agencies for disposal. 23
24
59.1”
19.7”
0.5m / 19.7”
0.5m / 19.7” 1.5m / 59.1”
Add Narwal detergent sheet into the clean water tank for improved mopping results. Please be reminded not to add detergents of other brands, otherwise the robot may not function properly.
4. Install the clean water tank and wastewater tank properly in the base station after verifying that there is no wastewater in the wastewater tank.
9. During the mopping process , the robot will automatically return to the base station to get the mop cleaned.
12. After completing a mopping task , the robot will return to the base station to get the mop cleaned and air dried automatically.
Clean it after every mopping operation
It is recommended to clean it after each vacuuming operation
3. Install the side brush with an L mark on the left side of the vacuuming module, and the one with an R mark on the right side of the vacuuming module. (You must pay attention to the left and right directions of the sidebrush during installation. Incorrect installation may lead to brush deformation).
Failed to exit the base station, please clear the way near the base station
A: Mop moisture level is dependent on for how long and at what rotation speed the mop is dried after being cleaned.To ensure that mop is always effectively cleaned,the same amount of water is used to clean the mop.
12.36” x 13.58” x 4.21” 3.8kg / 8.3 lb
Base station 15.79” x 14.09” x 17.2”
7.3kg / 16.1 lb
Warning:
61
62