level one FSW-1650 16-Port Fast Ethernet Switch Installation Guide
- June 5, 2024
- level one
Table of Contents
level one FSW-1650 16-Port Fast Ethernet Switch
Hardware Installation Figures
Flat Surface Installation
Installation
LED Indicator
LED
Indicator
| Status| Meaning
---|---|---
Power| Solid green| Power is on.
Off| Power is off.
Link/up
| Solid green| The port is connected, but no data is transmitting or
receiving.
Blinking| The port is transmitting or receiving data.
Off| The port is NOT connected.
- Mode Control: You can select the switch mode.
- Normal mode: All ports can communicate with each other.
- Flow control mode: The flow control function is close, all ports can communicate with each other.
- VLAN mode:1~14 ports can not communicate with each other, but can communicate with 15~16 ports.
- Extend mode: Speed of 1~8 ports is reduced to 10 Mbps, the transmission distance can reach 250m.
Connecting Equipment
- Step1. Inspect the PowerAdapter carefully, and make sure that it is properly connected to a power source.
- Step2. Plug in the Power Adapter to the Switch.
- Step3. Connect your network devices with the switch by using an Ethernet cable. (e.g. Cat-5e)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>