YUYI S21 Car Stand Wireless Charger Instruction Manual
- June 5, 2024
- YUYI
Table of Contents
YUYI S21 Car Stand Wireless Charger
Car Wireless Charger Manual
- Product Name: Car stand wireless charger (Intelligent sensing)
- Power:5W.7.5W, 10W,15W(Optional)
- Size:Middle disk diameter: 12.4cmx7.9cmx2.2cm
- Charging interface:Type-C
Packing list:
- Car bracketx1,Manualx1,
- Dta lingx 1, Car outlet base(clip)x1
OVERVIEW
Specifications
- Model:Ss21
- Color:Silver Tarnish
- Weight:product net weight about 112g
- Material: PC+ABS Vacuum Plating
- Input voltage/current:5V/2A,9V/1.67A
- Output power: 15W, 10w,7.5W,5W automatic identification
- Transmission efficiency:72%
- Charging distance:3-8mm
- Support Specifications:Qualified with Q Wireless Protocol Charging
- Devices that support QC wireless fast charging.such as iphone xs.iphone xr,.iphone xs max.iphone x,iphone 8, iphone8 Plus, Samsung S6,s6edge, s7,$7edge, s8. s8+, s9+, s10,Huawei P30 Pro,Huawei Mate 20 Pro,Xiaomi 9
- Devices that do not support wireless charging need to purchase Qi-compliant wireless receivers before they can be used.
Instructions For Use
- Connect the car wireless charging device to the compatible data line when using it.
- Connect the USB end of the data cable to the rechargeable port on the car (Such as: cigarette lighter conversion charger and car USB charging interface).
- The bottom bracket adjustment button can adjust the size of the mobile phone. The location of the line charging.
- The equipment clip clamps the air outlet end of the air conditioner, and other equipment can also be placed. The place to buckle the clip.
- After the device is connected to the 5V-9V DC power supply, the red indicator light is on,After putting in the phone, the smart sensing device automatically clamps the phone. At this time, The wireless charging will automatically charge the phone, and the blue light will be on when charging (with (Mobile phone with wireless charging function) You need to touch the back case when you take out the phone The raised sensing point on the top, when the hand touches the position of the sensing point, set Standby automatically open your arms and take out the phone. Red and blue when there is a foreign body detected The light flashes.
Precautions
- Do not over-squeeze or bump the device
- Do not use under severe high temperature, humidity or corrosive environment Wireless charger to avoid damaging the circuit of the device
- This equipment foreign body detection, over-current protection, short-circuit protection, intelligent Recognition.
- The current of this equipment must reach 2A.
- Please use the matching power adapter, otherwise it will affect the wireless Charging efficiency may be off.
- Support mobile phone size: 4.7-6.5 inches (4.7-inch mobile phones must have phone case)
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>