Shenzhen Yuyi Lnterlling Electronics S11 Magnetic Wireless Charger User Manual
- June 6, 2024
- Shenzhen Yuyi Lnterlling Electronics
Table of Contents
CS11
Magnetic wireless charger
User manual
Thank you for purchasing the S11 magnetic wireless charger.
This manual can Let you know and be familiar with the use and function of your
wireless charger in advance . Start a happy journey for yourself.
Product Features
- This product has built-in multi-stage magnets, which make the magnetic force more stable.
- Magnetic absorption charging, accurate positioning, improve the efficiency of wireless charging.
- Metal CD pattern + tempered glass panel, the appearance is more high-end and exquisite.
- Support all mobile phones with wireless charging function, compatible with 15W, 10W, 5W.5. After power on, a two-color breath lamp is designed to flash alternately, which is dynamic and beautiful.
Parameter specification
Model: S11
Input: 5V 3A, 9V 2A, 12V 1.5A
Output: 15W/10W/5W Charging interface: type-C
Instructions
-
To use this device for charging, your mobile phone needs to be equipped with a magnetic mobile phone cover.
-
Loosen the nut, insert the clamp and tighten it. It is recommended to clamp the air outlet of the air conditioner.
-
Please connect the device to the power supply, and then put the mobile phone with the magnetic leather case, Put it on the device, the device will automatically absorb the mobile phone and charge it accurately.
-
If your mobile phone doesn’t support wireless charging, please buy a mobile phone suitable for your wireless charging receiver.
Matters needing attention
- Please do not use this charger in a humid environment.
- Please do not use this charger in a high-temperature environment.
- Please do not place metal foreign objects (such as keys, coins, etc.) on the charger in order to avoid the charger heating damage.
- Please do not put magnetic materials (such as trial cards, ID cards, etc.) on the charger
- Please do not disassemble and repair the charger by yourself. Disassembly may cause complete damage this product is not included in the warranty.
Packing list
- Magnetic wireless charger x1.
- Instruction x1
- Data linexi
- Vehicle air outlet base (clamp) x1
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>