Yuyi Intelligent S19 Car Wireless Charging Bracket Instruction Manual
- June 16, 2024
- Yuyi Intelligent
Table of Contents
Yuyi Intelligent S19 Car Wireless Charging Bracket
Car Wireless Charger Manual
Product Name: Car stand wireless charger
Power: 15W/10W/7.5W/5W
Effective transmission distance: 1-20cm
Size:
Intermediate disc diameter: 109mm72.5mm45.5mm
Charging interface: Type-C
Packing list: Carbracketx1 , Manualx1 Data linex1 ,Car outlet
base(clip)x1
Functional components
Specifications
- Model: S19
- Weight: about 102g
- Material: Aluminum sheet oxidation+(PA+ABS) spraying
- Input voltage/current: 5V/2A, 9V/1.67A
- Output power: 5W/7.5W/10W/15W
- Transmission efficiency: 75%
- Charging distance: 0-BMM
- Support specifications: Charging according to QI wireless protocol
- Devices that support QC wireless fast charging, such as iPhone 15 Series, iPhone 14 Series, iPhone 13 Series, iPhone 12 Series, iPhone 11 Series, iPhone XS Max, iPhone XR, iPhone X, iPhone 8,iPhone BX, HUAWEI Mate 60 Series, Mate 50 Series, Mate 40 Series, Mate 30 Series. Mate 20 Series,P50 Pro,P40 Pro,P30 Pro, V40 Series,V30 Series, SAMSUNG GALAXY Series, S8-S20 Series,NoteB-1 O Series.
- Devices that do not support wireless charging must purchase a wireless receiver that meets QI standards before use.
Instructions For Use
- Connect the on board wireless charging device to the appropriate data cable during use.
- Connect the USB end of the data cable to the rechargeable interface on the car.(such as cigarette lighter conversion charger and on-board USB charging interface)
- The device clamp can clamp the air outlet end of the air conditioner and can also be placed in other places that can be clipped.
- When the device is connected to a 5V-9V DC power supply, the pickup light will light up, and the light will display seven different color effects with different conversions. The conversion frequency of the light will increase with the sound and music, presenting a illusion effect.
- When the front of the object is close to the device 3CM- 20CM, the automatic sensing will unfold the left and right arms of the bracket. After inserting the phone, the device will automatically clamp the phone and start charging. When charging, the pickup light will light up. When removing the phone, simply touch the touch mark on the bottom of the back side. At this point, the bracket is unfolded and the phone can be removed.
- The device has a built-in battery, and without connecting the power and data cable, the bracket can open and close normally (wireless charging does not work).
Precautions
- Do not excessively compress or collide with the equipment.
- Do not use the wireless charger in severe high temperature, humidity, or corrosive environments to avoid damaging the device’s circuit.
- 0This device has foreign object detection, overcurrent protection, short circuit protection, and intelligent recognition.
- The current for powering on this device must reach 2A
Thank you for using this product!
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used forth is transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>