Shenzhen Yuyi Intelligent Electronics S18 3 In 1 Zinc Alloy Magnetic Foldable Wireless Charger User Manual
- June 13, 2024
- Shenzhen Yuyi Intelligent Electronics
Table of Contents
S18 3 In 1 Zinc Alloy Magnetic Foldable
Wireless Charger
User Manual
Product parameters
| Model | S18 |
|---|---|
| Interface | Type-C |
| Input | 5V/3A(Max),9V/2A(Max) |
| Output | Phoen 15W(Max)+TVVS earphone 5W (Max) + Watch 2.5W(Max) |
| Color | White/Black |
| Material | Zinc alloy+PC+ABS+silicone |
| Size | 133mm68mm14mm |
| Coil | Single coil+single coil+single coil |
| Package size | 1958536MM |
| Net weight | 220g |
| Gross weight | 217g |
| Authentication | FCC, CE, RoHS |
| packing list | 1Wireless Charger,118W Adapter, |
1USB-A to USB-C Charging Cable,1User Manual
Indicator Light:| 1.After being powered on, the wireless charging indicator
light will illuminate for 1.5 seconds and then turn off.
2.When charging the phone separately, the green light remains steadily on.
3.When charging the earphones separately, the blue light stays
4.When htceda. rging both the phone and earphones simultaneously,
the light remains light blue.
5.When charging the watch separately, there is no indicator light. 6.FOD: If
there is a foreign object detected on a device, the corresponding light will
flash, while AirPods can still wirelessly charge properly in their designated
position.
Note:| To enable fast wireless charging, a QC3.0 OR PD adapter must be used.
Compatibility Guide
-
Smartphone
iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 mini, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max -
Smar Watch
iWatch 2/3/4/5/6/SE/7/8/SE 2/Ultra -
Earbuds
AirPods 2/3/Pro/Pro 2 With With wireless charging (AirPods 2nd Gen not compatible) -
Multiple charging modes
This device can be placed in multiple charging modes, and can be placed vertically or horizontally, allowing for easy placement.
Usage Guidelines
Kindly take heed of the following matters, as failure to do so may lead to irregular charging, elevated charging temperatures, sporadic charging, or potential non-charging scenarios.
-
Not compatible with devices other than Apple, such as Samsung.
-
Kindly ensure that the phone/watch/AirPods are placed at the center of the charging area.
-
We suggest using a fast charger adapter (9V/2A) for optimal results, allowing simultaneous charging of three devices while maintaining the highest charging efficiency. The 5V/2A charger will provide standard charging speed, which may be comparatively
slower than that of a fast charger. -
The charging distance ranges from 2 to 8 mm. Please avoid using protective cases that exceed 3mm in thickness.
-
The watch features temperature control. Charging will automatically pause when the temperature reaches 104 °F. Charging will resume once the temperature returns to normal levels.
-
Avoid having any metal or magnetic objects within a 6cm radius of the center of the phone’s back while charging.
-
Charging speed increases with lower temperatures. Charging is faster during winter compared to summer.
-
Refrain from charging in high-temperature and humid environments to prevent potential circuit damage.
-
When charging the Apple iPhone 13 series, it is compatible with fast charging up to 7.5W, but not with 15W charging (due to Apple’s proprietary agreement).
-
Placeitin an area inaccessible to children to prevent any unintended accidents.
Troubleshooting
- Ensure that the device’s firmware is up-to-date.
- Verify that your device is capable of wireless charging.
- 1tis important to use the authentic charging cable and adapter provided with the device.
- Steer clear of bulky device cases.
- Stay away from elevated ambient temperatures; the recommended temperature range is between 82-86°F.
- 1f your phone or watch isn’t charging completely, attempt the following steps: Navigate to [Settings] – [Battery Health] and disable battery optimization.
- If the earphones are depleted and unable to charge, kindly remove them and charge the charging case separately.
- Should the light start flashing, signaling irregular charging, please inspect the surroundings for any potential foreign objects.
About the FCC
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules operation is subject to the
following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received,including interference that may cause undesired operation.
FCCWarning:
Any Changes or modifications not expressly approvedby the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device,pursuant to part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against harmfulinterference in
aresidential installation.This equipment generates uses and can radiate
radio,frequency energy and, if notinstalled and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in particular
installation. If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and
on. The useris encouraged to try to correct the interferenceby one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technicianfor help.