hama 200002 Universal Notebook Power Supply Instruction Manual

: June 5, 2024
: Hama

Table of Contents

hama 200002 Universal Notebook Power Supply
OVERVIEW
Operating instruction
Safety instructions
Start-up and operation
Care and Maintenance
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 200002 Universal Notebook Power Supply

OVERVIEW

hama 200002 Universal Notebook Power Supply FIG
5

Operating instruction

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates arisk of electric shock from touching product parts carrying hazardous voltage.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

Universal notebook power supply unit
7notebook connectors
Power cord
These operating instructions

Safety instructions

Use the product only for the intended purpose.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Ensurethereissufficient scope for heat dissipation and ventilation.
Only use the article under moderate climatic conditions.
Do not use the product in areas in which electronic products arenot permitted.
Do not use the product in adamp environment and avoid splashing water.
Do not short-circuit the battery of the opened terminal device. Thereisa risk of explosion.
Protect the product from dirt, moistureand overheating and use it in dry environments only.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits specified in the technical data.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Make surethat cables do not pose atripping hazardor block emergency exits.
Do not bend or crush the cable.
As with all electrical products, this device should be kept out of the reach of children.
Do not modify the device in any way.Doing so voids the warranty.
Keep the packaging material out of the reach of children due to the risk of suffocation.
Dispose of packaging material immediately in accordance with the locally applicable regulations.

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the AC adapter,adapter cable or power cable is damaged.
Do not attempt to service or repair the product yourself.Leave any and all service work to qualified experts.

Start-up and operation

Note –mains voltage 100 –240 V

The power supply unit is suitable for mains voltages of 100 –240 Vand thereforecan be used worldwide. Please note that a country-specific adapter may be necessary.

Ensurethat your notebook requires asupply voltage of 15 V/19V (+/- 1Volt).
You can find this information on the original power supply unit or in your terminal device’s operating manual. If necessary,ask the dealer who supplied your terminal device or contact your terminal device manufacturer’s support service.
Set the voltage selector switch to the voltage required by your terminal device.

Warning

Do not use the universal notebook power supply unit if you areunable to definitively determine your terminal device’s supply voltage.
Do not change the voltage again during operation of the power supply unit in combination with aterminal device.
Ensure that the notebook’s total power consumption does not exceed the power supply unit’s rated output of 65 W.
Failure to comply with this may cause damage to the universal notebook power supply unit and the connected terminal device!

Note the instructions in your device’s operating manual. If these do not contain any instructions expressly to the contrary,proceed as follows:

Warning

Do not use force to connect the notebook connector.
Missing or lost notebook connectors can be requested via our support hotline or by visiting www.hama. com/adapter-service.Available connectors willbe sent to you free of charge.
Use the connector on the original power supply unit to select the appropriate notebook connector.
Without connecting it to the power supply unit, determine the mechanical compatibility between the notebook connector and the connection socket on the terminal device.
The connector must slide easily into the socket but should not exhibit too much play.

Warning

Only operate the product from asocket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cordfromthe socket.
If using amulti-socket power strip, make surethat the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
Connect the appropriate notebook connector to the power supply unit’s DC connection cable.
Connect the power cordtothe power supply unit and your terminal device.
Then connect the mains plug to aproperly installed socket.
The terminal device can now be used and switched on charged.

Note
Disconnect the product from the mains after use.

Care and Maintenance

Note
Disconnect the product from the mains beforecleaning.

Only clean this product with aslightly damp, lint-free cloth and do not use aggressive cleaning agents.
Ensurethat no water is able to enter the product.

Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failureto observe the operating instructions and/or safety notes.

Technical data

Specifications in accordance with Regulation (EU) 2019/1782

Manufacturer’s name or trade mark, commercial registration number and address| Hama, HRA12159,

Dresdner Str. 9,

86653 Monheim

Model identifier| 00200002
Input voltage| 100 – 240 V
Input AC frequency| 50 / 60 Hz
Output voltage / Output current / Output power| 15.0 V DC/ 4.25 A/ 63.8 W

19.0 V DC/ 3.42 A/ 65.0 W

Average active efficiency| 88.0 %
Efficiency at low load (10 %)| 86.1 %
No-load power consumption| 0.21 W