jellycomb MS001 wireless mouse User Manual
- June 5, 2024
- jellycomb
Table of Contents
wireless mouse
User Manual
Overview
A . Left button
B. Right button C. Scroll wheel & Middle
D. Power switch
E. USB receiver
F. Battery box
| Take the battery cover off
---|---
| 1. Install the battery (please notice the place of anode and cathode
2. Switch on
| Remove the receiver
| Insert the usb receiver into the USB port of PC
Data parameter
Basic:
Data transmission:1Mbps
Frequency: 2403.85 MHZ-2479.85MHz
Channel: 16
Engine: Optical
Distance: 20m
Voltage: 1.5V
Current: 11mA
Mouse Key life: Above 3 million
Mouse Size: 110x60x31mm
Mouse Weight: 62g
Tracking performance:
Mouse Resolution: 1600DPI
Polling rate: 250Hz
System requirement:
Windows: 2000/ ME/
XP(x64)/ Vista/ 7/ 8/ 10
Workable USB port
Package included:
►1 x Wireless mouse
►1 x USB receiver (in battery storage)
►1 x User guid
Trouble Shooting
If your wireless mouse can not work properly, please try the following steps to get it to work:
- Replace new batteries timely if the batteries have run out;
- Disconnect and re-connect the nano receiver to the USB port to establish a new connection for the mouse;
- Move the mouse, closer to the receiver if the device is out of the optimum range;
- Please press the scroll and the right button to match the code again;
- Flip the on-off switch.
If the problem still can not be solved, please email us at support@jellycomb.com (us buyers only). we will get back to you with a solution in 24 hours.
Other 2 ways to get in contact with us:
Way 1:
– Click the seller’s name on a product page to get to the storefront.
– Then click the “Ask a question link on the right side of the page.
– Select the “An order I placed” option, select your reason, and then compose
your message to us.
Way 2:
– Sign in to your Amazon account, click the “Your Account” option, and
select “Your Orders”.
– Click the “Contact Seller” button next to the order, and then check the
radio button next to “An Order I Placed”.
– On the “Select a Subject” pull-down menu, select the reason why you are
contacting us.
– Once done, click the “Write Message” button to compose your message.
We will get back to you in 24 hours, and try our best to meet your
satisfaction.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>