RETEKESS T114 999 Channels Restaurant Pager Wireless Calling System User Manual

RETEKESS T114 999 Channels Restaurant Pager Wireless Calling

System

Summary
Thanks for choosing this wireless calling system. The receiver host adopts RF wireless and learning code technology. It can easily pair up to 999 channels of wireless calling transmitters and 1 manager remote controller. The receiver host uses an advanced industrial microprocessor and high-sensitivity superheterodyne receiving technology which makes the products very stable.
At the same time, the wireless calling receiver host has an advanced number speaker function, it can clearly read the number, function, room number, and so on and is compatible with different working modes, and suitable for different places. The wireless calling system has millions of different codes which can be paired easily and freely. And it is widely used in restaurants, cafés, bars, tea shops, KTV, bank, office, factories, hotels, hospitals, and so on.

Features

• Adopt the latest industrial stable chipset.
• Independent storage avoiding data lost
• Calling number speaker
• Colorful LED indication
• Multiple working modes optional for different places
• Self-testing technology makes it work well every time
• Super error correction
• Address data only avoid repeat
• enu setting voice prompt, easy to set
• Calling records display can be fixed or cycle
• Calling records cycle display time is adjustable
• Timeout calling display flickering prompt
• Adjustable volume
• Restore the factory default function
• High receive sensitivity
• LED tube display, easy to read
• Beautiful design and portable to move

Technical data

• Working frequency: 433.92MHz
• Working voltage: DC9V/1A
• Working current: <600mA
• Standby current: <60mA
• Sensitivity: -110dBm

Diagram

Button Function

• 【BACK】Back to the previous menu or standby status.
• 【Vol－】Volume decrease.
• 【Vol＋】Volume increase.
• 【Down】Short press to turn down one by one, long press for quick.
• 【UP】Short press to turn up one by one, long press for quick.
• 【SET】Long press 2sec to enter settings mode; short press to submenu.
• 【DEL】Delete calling records history or delete paired transmitter button.

Settings Diagram

Note:

1. Long press “SET” for 2 sec to the settings menu.
2. In the second class settings menu, press “UP/DOWN” to adjust the parameter value.
3. For first-time use, please set the working mode in advance.
4. For more information on each item, please check the below instruction.

Screen Display function

Cd8-mode 0: Normal mode 1

Cd8-mode 1: Normal mode 2

Note: display is the same as mode 0, but less dingdong voice.

Cd8-mode 3: Area mode

Note: the area shows 6, 7, 8, 9, A, b, C, d, E, F

Cd8-mode 3: Room mode

Cd8-mode 4: Hospital mode

Cd8-mode 5: 99-channel mode

Manager remote controller (Optional)

SET
Long press for 2sec to enter the settings menu; short press to enter the submenu.

DEL/BACK
In calling status, delete the calling records. In setting status, back to the previous menu or standby status.

UP
Short press to turn up the number; Long press to turn up the number quickly; Browse the calling records upper.

DOWN
Short press to turn down the number; Long press to turn down the number quickly; Browse the calling records upper.

Operation Instruction

1. Self-test when power on
   When the receiver host is powered on, it starts the initialization program. The 4 corners LED indicators will flicker and display will show the digits from 000 to 999 along with the prompt music.

2. Function settings
   For the first time using, please do the settings below. After all the settings are finished, please power off the host and reset. Long press the “SET” button for 2 sec to enter the first-class settings menu. Then press the “UP/DOWN” button to select the menu from Cd1 to Cd9. And press the “SET” button to enter the submenu.

3. “Cd1”: Prompt music
   Press the “SET” button to enter the “Cd1” submenu. The display will show “00”, then press “UP/DOWN” to select sound prompt mode.

  * 00: number speaker mode
  * 01: music prompt mode
  * 02: dingdong prompt mode  

Press the “BACK” button to the previous menu or quit to standby status.

2.  **“Cd2”: Volume**  

Press the “SET” button to enter the “Cd2” submenu. The display will show “15”, then press “UP/DOWN” to adjust the volume from “01″ to “15″ at different levels. “00″ means mute. Press the “BACK” button to the previous menu or quit to standby status.
Note: In standby status, press the “Vol+/-” to adjust the volume directly.

3.  **“Cd3”: Display cycle time setting**  

Press the “SET” button to enter the “Cd3” submenu. The display will show “004”, then press “UP/DOWN” to adjust the display cycle time from “001″ to “180″ seconds. “000″ means no cycle. This function is that when there are several calling records, they will cycle display one by one automatically.
Press the “BACK” button to the previous menu or quit to standby status.

4.  **“Cd4”: Delete time setting**  

Press the “SET” button to enter the “Cd4” submenu. The display will show “040”, then press “UP/DOWN” to adjust the auto delete time from “001″ to “240″ seconds. “000″ means no auto-delete function. This function is that when there is a calling record on the screen, after some time, the record will be deleted automatically. Press the “BACK” button to the previous menu or quit to standby status.

5.  **“Cd5”: Timeout prompt time setting**  

Press the “SET” button to enter the “Cd5” submenu. The display will show “000”, then press “UP/DOWN” to just the timeout prompt time from “001″ to “180″ seconds. “000″ means no timeout prompt function.
When the time is set, in the time, the service person should go to provide service, or not, the display screen will flicker to prompt to do it.
Press the “BACK” button to the previous menu or quit to standby status.

6.  **“Cd6”: key switch mode setting**  

Press the “SET” button to enter the “Cd6” submenu. The display will show “5”, then press “UP/DOWN” to just the key mode.

  1. “2″ means 2-key mode, which is suitable for 1/2-button calling transmitters.
  2. “5″ means 4-key mode, which is suitable for 1/3/4/5/6-button calling transmitters.
7.  **“Cd7”: Number registration setting (Transmitter paring or deleting)**

Before doing the pairing, please refer to (8) “Cd8” to set the working mode. Such as normal restaurant mode, area mode, room mode, or hospital mode. Press the “SET” button to enter “Cd7” submenu. The display will show “001”, then press “UP/DOWN” to select the number of the calling transmitter.

1. Pair calling transmitter
   Press the “UP/DOWN” button select one of the numbers, for example, “001”, and then press any button on the transmitter, the speaker will sound “successful registration” and the display screen turn to the next number “002” automatically. Then you can continue to do the next pairing up to the number 999 transmitter (normal mode). After finish, the pairing, press the “BACK” button on the previous menu or quit to standby status.
   Note:

2. long-press the “UP/DOWN” button to jump the numbers quickly.

3. While the number is paired, the 4 corners LED indicators will be flicker, or not, if the LED indicators are off, it means the number has no paired transmitter.

4. In area mode, the first digit of three is the area, it can show 6/7/8/9/A/b/C/d/E/F, the last two digits mean the number from 01 to 99 in one area, press the “UP/DOWN” button to select suitable area and number.

5. In-room or hospital mode, the first two digits mean the room number from 01 to 99, and the last digit means the desk/bed number in one room from 1 to 9, press the “UP/DOWN” button to select a suitable room and number.

6. Delete calling transmitter
   Press the “UP/DOWN” button and select one of the numbers you want to delete. For example number 003, the display shows “003” and the 4 corners LED indicators flicker. Then press the “DEL” button, and the LED indicators will be off which means the number 003 transmitter is deleted.

7. Pair the manager remote
   The manager remote is optional, when need it, please pair it to number 000. Then you can use the button on the remote to replace the button on the receiver host.

“Cd8”: Working mode setting
Press the “SET” button to enter the “Cd8” submenu. The display will show “0”, then press “UP/DOWN” to select the working mode from 0 to 4.

• 0: screen display 001~999, sound “Dingdong+No. 1~999 call”
• 1: screen display 001~999, sound “No. 1~999 call”
• 2: screen display A01~F99, sound “Dingdong+A area+No. 1~99 call”
• 3: screen display 011~999, sound “Dingdong+Room 1~99+No.1~9 call”
• 4: screen display 011~999, sound “Dingdong+Room 1~99+No.1~9 emergency call”, this mode is used in hospitals.
• 5: screen display 01A/b/C~99A/b/C, sound “Dingdong+No.1~99 call”. The function is 99 channels and shows the button function, A/b/C.

Note: After finishing the function, please power off and restart the host to ensure the function is confirmed.

“Cd9”: Restore the factory default setting
Press the “SET” button to enter the “Cd9” submenu. The display will show “no”, then press “UP/DOWN” to select the restore function. No: don’t do restore function PAt: restore the default expect “number registration” setting. ALL: All the settings will be restored to default settings like below:

• Cd1: 00 (number speaker)
• Cd2: 15 (volume is 15 level)
• Cd3: 004 (records display cycle time is 4s)
• Cd4: 040 (auto delete records time is the 40s)
• Cd5: 000 (no timeout prompt)
• Cd6: 5 (4 key modes)
• • Cd7: 001 (no paired transmitter)
• Cd8: 0 (normal mode)

Select one option and press the “SET” button, after 3s the host will restore to default settings and turn back to standby status automatically.

Packing List

FAQ

volume louder.

Optional for transmitter

1. button mode: YK500-1E/F, YK1000-1C, YK200-1C, TSYK200-1, YK500-1H
2. button mode: YK1000-2C, TSYK500-2X, YK500-2H, TSYK1000-2X
3. button mode: YK500-3H
4. button mode: YK500-4X, YK500-4H, TSYK1000-4B, TSYK1000-4X,
5. button mode:   TSYK2000-4X
6. button mode: TSYK500-6

Notice

1. While it is working, please pull the antenna out for the best receiving effect.
2. After finishing the settings, please power off the host and restart to make it effective.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>