TOPCOM KS-4262 Digital Baby Video Monitor Instruction Manual

KS-4262 Digital Baby Video Monitor
Instruction Manual

PARTS DESCRIPTION

KS4262
PARENT UNIT

SAFETY INSTRUCTIONS

• Contact with conductors or components under electrical tension can be lethal.

• Observe the following safety instructions in order to avoid the risk of electric shock:

• To avoid the risk of damage to the equipment, use only the AC mains adapter supplied with the equipment.

• Do not use the equipment if the AC mains adapter, the power cable, or the plug is damaged.

• Never open the enclosure of the AC mains adapter. There is a risk of electric shock if you touch any contacts or connections under electrical tension or if you modify the electrical or mechanical construction.

• Protect the equipment against moisture and moisture penetration, and keep it free of dust. Unplug the AC mains adapter immediately in case of contact with moisture.
  Unplug the AC mains adapter in case of malfunctions, during thunderstorms, and when cleaning the equipment.

• Protect the cable against contact with hot surfaces or other sources of hazard, and do not allow it to be pinched.

• Risk of fatal injury due to electric shock!
  Before cleaning the equipment, switch it off and unplug the power cable from the main receptacle.

• Risk due to leaking battery fluid from leaking batteries (regular or rechargeable) can cause injuries (skin irritation) or damage to the equipment. Wear safety gloves.

• If you suspect that the equipment is damaged, always have it checked by an expert before using it again.

• No naked flame sources, such as lighted candles, should be placed on the apparatus.

• Attention should be drawn to the environmental aspects of battery disposal.

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

• Caution: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

• Warning: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.

• The AC mains adaptor is used as the disconnect device, the disconnect device shall remain readily operable.

PARTS DESCRIPTION

Parent unit

1. Charge indicator LED
2. Power / Pair indicator LED
3. Outdoor volume indicator LED
4. Screen
5. Menu button
6. OK button
7. Mode button
8. Intercom button
9. Microphone
10. Up / Brightness + button
11. Down / Brightness – button
12. Left/ Volume + button
13. Right / Volume – button
14. Antenna
15. Power on/off button
16. Power input
17. Support frame

Baby unit

1. Pair button / Night light switch
2. Power/pair indicator LED
3. Infrared LED
4. Camera
5. Microphone
6. Base
7. Antenna
8. Speaker
9. Temperature probe
10. Power input

GETTING STARTED

• Take the appliance and accessories out of the box. Remove the stickers, protective foil, or plastic from the device.
• Place the appliance on a stable surface and make sure there is 10 cm. free of space around the appliance.
• Connect both the parent unit and the baby unit to the provided power adaptors. On the baby unit, a blue LED will light up.
• Press the power button of the parent unit to switch it on. Press it again to switch it off.
• NOTE: Charging the parent unit fully before use is recommended.
  This will allow the unit to operate on battery in the event of a power failure.

USE

Pairing the units

1. Press and hold the pair button on the baby unit until the pairing indicator LED flashes.
2. Press the menu/zoom button on the parent unit.
3. Use the volume/brightness buttons to select the channel menu
4. Press OK to confirm.
   ⇨ If successful, the monitor shows the live view of the baby unit.
   ⇨ NOTE: if no image appears, repeat the previous steps.

Night vision
The baby unit has 6 high-intensity infrared LEDs for picking up clear images in the dark.

Talk function
Press and hold the intercom button on the parent unit to talk to your baby through the baby unit speaker. The microphone icon will be shown at the top of the display.
To disable the talk function, release the intercom button.

Volume
You can adjust the volume by pressing the volume increase, or volume decrease buttons when the screen is in playing mode.

Brightness
You can adjust the brightness of the screen by pressing the brightness increase, or decrease buttons when the screen is in playing mode.

Zoom
Press and hold the menu/zoom button to zoom in or out.

Night light ON/OFF
You can set the night light in various colors. The cycle is as follows;
ON > White > Red > Green > Blue > Color gradient > OFF .
You can set the modes by:

• Pressing the pair button on the baby unit to turn the night light on.
• Press and hold the OK button on the parent unit.

Mode button
Press the mode button to switch to display mode. The switching sequence is:
Cam 1 > Cam 2 > Cam 3 > Cam 4 > Cam 1+2 > Cam 3+4 > Single camera automatic cycle.
NOTE: When a camera is not paired, the cam will not be displayed.

SCREEN ICONS

MENU OPTIONS

Press the direction buttons to select a mode, then press OK to confirm.

1. Pair
   (see 4.1)

2. Time:
   Press the left/right button to select
   Press the up/down button to adjust
   Press OK to confirm
   Press Menu to exit

3. Play a lullaby
   Press the left/right button to select
   Press OK to confirm
   Press Menu to exit

4. Brightness
   Press the left/right button to select
   Press Menu to exit

5. Wake up sensitivity setting
   Press the left/right button to select
   Press OK to confirm
   Press Menu to exit

6. Alarm clock setting
   Press the left/right button to select
   Press OK to confirm
   Press Menu to exit

7. Temperature unit setting
   Press the left/right button to select
   Press OK to confirm
   Press Menu to exit

8. Off-screen settings
   Press the left/right button to select
   Press OK to confirm
   Press Menu to exit

SPECIFICATIONS

| Item| Value
---|---|---
General| Operating frequency| 2.4GHz
Operating temperature| -10°C-50°C/+14°F+122°F
Storage temperature| -20°C-+60°C/+14°F -+140°F
Operating humidity| <85°/0RH
Unobstructed effective range| About 150-200m
Baby unit| Image sensor type| CMOS
View angle| 50°
Power supply| DC 5V
Maximum
transmission output| 9.88 dBm
Parent unit| Screen size| 4.3 inch
Number of pixels| 480XRGBX272
Power supply| DC 5V Battery
3.7V/1500mAH
Consumption current| 100mA~450mA
Color arrangement| RGB Delta
Video system| PAL
Maximum
transmission output| 9.65 dBm

CLEANING AND MAINTENANCE

• The probe is not waterproof. Please wipe with a clean and dry cotton swab to clean the probe on the inside.
• The body of the thermometer is not water-resistant. Never put the thermometer under a running tap or submerge it into water. Use a soft and dry cloth to clean it. Do not use abrasive cleaners.
• Store the thermometer in a cool and dry location. Free from dust and away from direct sunlight.

DECLARATION OF CONFORMITY

Hereby, Smartwares Europe declares that the radio equipment type KS-4262 is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the following internet address: www.topcom.eu

ENVIRONMENT

This appliance should not be put into the domestic garbage at the end of its durability but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual, and packaging put your attention to this important issue. The materials used in this appliance can be recycled. By recycling used domestic appliances, you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.

Support
You can find all available information and spare parts at
www.topcom.eu
Please read manual before use, and store it carefully for future use and maintenance.

BE: 078 481094(NL) Lokaal tarief
BE: 078 481540(FR) Tarif local
Jules Verneweg 87 5015 BH Tilburg The Netherlands| FR : 0825 560 650 18ct/min
DE: +49 (0) 1805 010762 14Ct./Min.
dt. Festnetz, Mobil max. 42Ct./Min
www.smartwares.eu|  UK: +44 (0) 345 230 1231
 ES : +34 938427589
CUSTOMER SERVICE

www.smartwares.eu

References

• Topcom | Kids safety & telecommunication products

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>