eevi EV04 Personal Medical Alarm Instruction Manual

eevi EV04 Personal Medical Alarm

The eevi Life Pendant (EV04) is available for professional monitoring.

In the Box

• charging dock
• lanyard
• charging cable
• pendant
• Telstra sim

EV-04 – Programming and Modification Instructions

This document outlines configuration settings for the EV-04 (GEM 4) pendant to function with Tunstall, as well as modifying settings in the field through SMS. These settings can be applied to the pendant via SMS commands, the Eview configuration software and via the config.bin file generated by Tunstall and applied through the Eview configuration tool [GPS Tracker Parameter Editor]

Note: it is also possible to build our own config files.

Tools needed

• Internet
• cable
• base station
• computer
• access to GPS Tracker Parameter Editor

GPS Tracker Parameter Editor NEW DEVICE SETUP [for Tunstall Monitoring

with Telstra Nano SIM]

1. Connect the base station via the USB cable to the PC
2. Open the GPS Tracker Parameter Editor (see attached zip file to download the program)
3. select ‘model’
4. from the drop-down select ‘model 04’
5. select ‘open DVD
6. select profile
7. select ‘.bin file’ (see attached)
8. go to system info
9. update the password (to the full PERS ID) for this pendant
10. update the prefix to ‘SAC-XXXX’
11. then save all.
12. open EVD to disconnect the pendant from the PC.

At this point, a brand new pendant has been configured with a Telstra SIM and TUNSTALL response.

NOTE: out of the box testing was conducted with Vodafone and could not be made to work. At this stage the only network that this device is compatible with is Telstra.

Parameter Editor Program:

• ParamEdit-NoJDK-0.5.10.zip

Sample Config Files – PERS ID will require updating:

note: that it is important any spacing within the .bin files remains the same. It is key to Tunstall receiving all of the required information from the pendant

640002.bin640001.bin

EV-04 SMS / Text Commands Editing an ACTIVE Tunstall Monitored Device

This tool is used for a device that is already programmed. These SMS functions allow remote changes once the device has been fully programmed.

Tools needed

• Internet
• Jasper Access
• Sim Card number
• The device powered up and on
• PERS ID.

EV-04 SMS / Text Commands Remotely Provisioning a NEW Tunstall Monitored

Device

This tool is used for a device that is already programmed. These SMS functions allow remote changes once the device has been fully programmed.

Tools needed

• Internet
• Jasper Access
• Sim Card number
• The device powered up and on
• PERS ID

EV-04 SMS / Text Commands Remotely Provisioning a NEW Self-Monitored

Device

This tool is used for a device that is already programmed. These SMS functions allow remote changes once the device has been fully programmed.

Tools needed

• Internet
• Jasper Access
• Sim Card number
• The device powered up and on
• PERS ID

Eevi Life Pendant (White) – Post-shipping/Setup Instructions

Our Eevi Life Pendant (White) aka EV-04/GEM4 gets shipped with a booklet that contains an insert instructing the client to call us when the device arrives. This doc contains some information to provide the client with, setup instructions, and a walkthrough of a test call to Tunstall (the monitoring center for these devices).

This is the insert sent out with the Eevi Life Pendant:

Once it arrives with the client, we should expect a call. The purpose of that call is to familiarise the client with the pendant (how to raise an alarm, how to charge it, a quick explanation that GPS will work best outside, and explain that invoices will begin after the first 3 free months). To initiate the test call to Tunstall, the SOS button is held for 2 seconds, it will then vibrate and the button can be released. The call sequence will begin.

The following are some points you might like to discuss with the client:

• The GPS on the device works best outside. The response center will have difficulty accurately locating you inside, particularly in a multi-level building like a shopping center
• The Eevi Life Pendant is charged by placing it in the charging dock. We suggest that you do this every night to ensure a full day of charge.
• When unboxing the pendant, there are a few things you will find.
• There is a lanyard to attach if you wish to wear the pendant around your neck
• There is the charging base unit, a cable, and a charging brick – attach the smaller end of the cable into the charging base unit and the larger USB side into the charging brick. The charging brick can then be plugged into a power point

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>