OUTFORM UITH108-B02 8 inch iDisplay User Manual
- June 5, 2024
- Outform
Table of Contents
8 inch display
UITH108-B02
User Manual
Composition description
3 ) Product size ( mm)-Column style
4 ) Product size ( mm)-Wall hanging style 
Power on settings
-
Power on settings network and device activation
-
Set server, company community name, installation location, and access mode
Face registration
-
Face input of local device (click the face mark in the lower right corner with the cursor)
-
Select the gate settings – click “open face management’
-
Face registration
4 ) Select single-person registration & batch import face for
registration
Batch registration: in batch registration mode, first use the U disk to name the employee’s picture (such as “Zhang San. JPG”) under a folder. Then click the batch import function on the face recognition machine. Select the picture folder under the U disk to import.
System settings
-
Mask mode(When the mask mode is on, the device recognizes the user without the mask, and prompts to wear the mask. The device flashes red status light to indicate early warning!)
-
Stranger mede (Turn on stranger mode, the device will flash red status light for unregistered face users to show early warning Don’t open the door!)
CE
NB
Herby, Outform Science 8 Technology (Shenzhen) Co., Ltd. declares that this 8″
display measurement terminal, UITH108-1302 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. In
accordance with Article 10(2) and Article 10(10), this product is allowed to
be used in all EU member states. Use the 8″ display in the environment with a
temperature between -20 C and 35 C, Adapter shall be installed near the
equipment and shall be easily accessible. The plug is considered as a
disconnect device of the adapter
Adapter Model: TDX-1202000
Input: AC 100-240V, 50/60Hz, 0.6A
Output: DC 12V, 2.0A
Operation Frequency: For WIFI: 2412MHz-2472MHz (802.11b/802.11g/802.11n(HT20))
For BT: 2402MHz-2480MHz
Max output power: For WIFI: 0.0555W For BT: 0.003W
Manufacturer: Shenzhen Sunchip Technology Co., Ltd.
Address: 2nd-3rd Floor, Building 4, Fuan Industry Area Phase 2, Dayang
Development Zone, Fuyong, Baoan, Shenzhen, China
Tel: 0755-23085934
Fax: 0755-23086272
E-mail: Wangsw@sunchip-tech.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment
should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
DECLARATION OF CONFORMITY
I hereby declare that the product
Product: Product Name: 8″ iDisplay
Model: UITH108-1302, UITH108-1303, UITH108-1304, UITH108-1305,
UITH108-1306, UITH108- B07, UITH108-608, UITH108-0O2, UITH108-0O3,
UITH108-004, UITH108-0O5, UITH108- C06, UITH108-007, UITH108-008, UITH108-D02,
UITH108-D03, UITH108-D04, UITH108- D05, UITH108-D06, UITH1084)07, UITH108-D08,
UITH108-E02, UITH108-E03, UITH108- E04, UITH108-E05, UITH108-E06, UITH108-E07,
UITH108-E08, RS-TS8B0
Brand Name: OUTFORM
Hardware Version: J8
Software Version: ADA8-32-7-sw0.2-20200615
Accessories:
Adapter Information:
Model: TDX-1202000
Input: AC 100-240V, 50/60Hz, 0.6A
Output DC 12V, 2.0A
Manufacturer. Shenzhen Teng Da Xing Electron Co., Ltd.
(Name of the product. type or model. batch or sera) number)
satisfies all the technical regulations applicable to the product within the
scope of Council Directives 2014/53/EU, 2014/35/EU and 2014/30/EU:and declare
that the same application has not been lodged with any other notified body.
EN 62368-1 :2014+A11:2017
EN62311:2008
Draft ETSI EN 301489.17 V3.2.2 (2019-12)
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 300 328 V2.2.2 (2019-07)
(tide(s) of regulations. standards. etc.)
All essential radio test suites have been carried out.
NOTIFIED BODY: MiCOM Labs Inc
— Address:
575 Boulder Court, Pleasanton, Califomia94566 USA
Identification Number 2280
MANUFACTURER or AUTHORISED REPRESENTATIVE:
— Address:
Outform Science & Technology (Shenzhen) Co., Ltd. Unit 3, 1st Floor, Huada
Building, Gongye 3rd Road, Yanshan Community, Zhaoshang Subdistrict, Nanshan
District, Shenzhen, China 518067
This declaration is issued under the sole responsibility of the
manufacturer and, if applicable, his authorized representative.
Point of contact: Ronen Simhi, 0086-755-832367151+0086-755-83236725
(Name, telephone and fax number)
2020-07-27
(Place. date of issue)
(Signature)
Ronen Simhi, GM
(Name and title in block letters)
Documents / Resources
|
OUTFORM UITH108-B02 8 inch
iDisplay
[pdf] User Manual
UITH108-B02, UITH108B02, 2AO9X-UITH108-B02, 2AO9XUITH108B02, UITH108-B02 8
inch iDisplay, 8 inch iDisplay, iDisplay
---|---