wet sounds REVO 8 Series REVO 8-SWW 8-Inch Marine LED Coaxial Speakers Owner’s Manual
- June 5, 2024
- wet sounds
Table of Contents
REVO 8 / 10 / 12 FA SERIES
REVO 10 / 12 HP SERIES
OWNERS MANUAL
WET SOUNDS
REVO 8 / 10 / 12 FA SERIES
REVO 10 / 12 HP SERIES
MARINE SUBWOOFERS
OPTIONALLY AVAILABLE SPEAKER GRILLES
See wetsounds.com for more info
THANK YOUR FDR YOUR WET SOUNDS PURCHASE!
CONGRATULATIONS!
Thank You for purchasing the Wet Sounds REVO Series Subwoofer. Wet Sounds
professional marine audio products represent the ultimate in high performance
marine audio. Wet Sounds speakers are specifically engineered to withstand the
rigorous marine environment.
The Wet Sounds REVO Series Subwoofers were designed to provide amazing output combined with a cutting edge style. Utilizing state of the art acoustic engineering and three dimensional computer aided design, the subwoofers represent the most advanced marine speakers in the world.
Please take a moment to read the instruction manual before starting your installation. If you have any questions or concerns, please contact you certified Wet Sounds dealer or Wet Sounds:
877-WET-SPKR (1-877-938-7757)
www.wetsounds.com
PROUDLY
DESIGNED
IN THE
USA
INSTALLATION
INSTALLATION
Wet Sounds REVO HP marine subwoofers have been specifically engineered to
produce outstanding results in both small sealed enclosures and vented
enclosures. REVO FA subwoofers are optimized for use in infinite baffle
(commonly called free air) installations.
As a rule, sealed enclosures provide better transient bass response than their vented counterparts, although the vented enclosures generally provide more deep bass. However, both enclosure types will work in any situation. Free Air works great in applications where it is difficult to install an enclosure. PLEASE NOTE: REVO Subwoofers do not come packaged with grilles, and must be purchased separately. Please visit wetsounds.com for more info.
FREE AIR
REVO FA are the only subwoofers optimized for free air use. Please do not
install any of the other woofers in free air. Free Air installations do not
need a dedicated enclosure. However, the front and the back of the woofer must
still be isolated from one another. If your boat has a solid panel under the
driver’s foot well with a large cavity behind it, this panel is ,a good
location for a REVO FA. However, if this panel is a half wall and will not
create a solid separation from front to rear, this will not be a good location
for a free air woofer. When looking for a location for a free air subwoofer,
make sure to consider that the area behind the woofer
becomes the “box”. Free Air woofers like a larger sealed area, so the larger
this cavity is, the better the results.
SEALED ENCLOSURES
This enclosure is made up of a totally closed, air-tight box. This type of
enclosure gives excellent, tight bass response, as well as providing an
effective control of loudspeaker excursion, maintaining it within reasonable
limits and generally providing lower distortion and very high volume levels.
If you build your own enclosure, WET SOUNDS recommends that you glue and screw
all joints using
enough adhesive to ensure that all joints are air-tight.
For optimal sealed enclosure specifications and dimensions, it is suggested that you visit www.wetsounds.com for complete details.
VENTED ENCLOSURES
VENTED ENCLOSURES
Vented enclosures are not air-tight and incorporate an additional opening
known as a port or vent, which is generally fabricated from either plastic or
cardboard tubing. The port augments the sound coming out of the woofer and is
in most cases capable of going lower in frequency than the same woofer in a
sealed box. Even though vented enclosures are not air-tight, you should follow
the same
procedure as with sealed boxes and glue and screw together all joints. Below
you will find drawings for a vented enclosure. In the special case of SEALED
enclosures, volumes greater or smaller than specified can be chosen, with
different results. Smaller enclosures lead to a more enhanced response and
higher power handling whereas larger ones exhibit better transient and more
extended response.
For optimal vented/ported enclosure specifications, it is suggested that you visit www.wetsounds.com for complete details.
ENCLOSURE CONSTRUCTION
For best performance the walls of the enclosure should be rigid and not
vibrate as a result of the internal pressures generated by the loudspeakers.
WET SOUNDS recommends constructing enclosures from a marine grade plywood like
Birch with a minimum thickness of 3/4″. In larger enclosures over 1 cubic
foot, internal bracing that joins opposite walls can be incorporated and the
final enclosure should be as rigid as possible. All joints should be glued and
fastened with screws. Additionally, internal joints can be covered with a
small bead of silicone adhesive to ensure that the enclosure is completely
air-tight. Drivers should be fastened to the enclosure with self-threading
screws with adequate length and diameter, utilizing all the mounting holes in
the frame. To avoid air leakage, a foam rubber gasket or similar sealing
method should be applied between the loudspeaker and the enclosure. The
external surface of the enclosure may be painted or fabric-covered, to suit
the consumer. Since low frequency sounds are not directional, subwoofer
enclosures can generally be placed anywhere within the boat, without
compromising stereo imaging. However, different placement locations of
subwoofer enclosures can sometimes influence the overall quality of
bass/mid-bass response, so you may wish to experiment with various mounting
locations before permanently mounting the woofer.
REVO SERIES SUBWOOFER TECHNICAL SPECS
REVO 8 FA S4
8 inch marine Free Air subwoofer
Impedance Single 4 Ohms
Resistance 3 .4 Ohms
Sd 213.8 cm2
Xmax 8.5 mm
Mms (g) 62
Voice Coil Size 1.5 inches
Fs 60 Hz
Vas 7.6 liters
Oms 4 .00
Qes 0.72
Qts 0.61
Bl (T*m) 10.4
Le 1.1
SPL 85.5 dB
RMS Power/ Peak 150 / 300 watts
REVO 10 FA S2/S4
10 inch marine Free Air subwoofer
Impedance Single 2 or 4 Ohms
Resistance 1.8/3.9 Ohms
Sd 383.6 c·m2
Xmax 10.8/11.0 mm
Mms (g) 124.8/119.8
Voice Coil Size 2.0 inches
Fs 45 Hz
Vas 20.7/21.6 liters
Qms 4.60/3.9
Qes 0.81/.66
Qts 0.67/0.58
Bl (T*m) 9.1/14.1
Le 1.3/3.9 mH
SPL 85.6/86.6 dB
RMS Power/ Peak 300 I 600 watts
REVO 10 HP S4
10 inch marine Subwoofer
Impedance Single 4 Ohms
Resistance 3.8 Ohms
Sd 383.6 c·m2
Xmax 11.9 mm
Mms (g) 174.5
Voice Coil Size 2.5 inches
Fs 40 Hz
Vas 20.1 liters
Qms 3.50
Qes 0.48
Qts 0.42
Bl (T*m) 18.7
Le 3.6 mH
SPL 86.2 dB
RMS Power/ Peak 400 / 800 watts
REVO 12 FA S2/S4
12 inch marine Free Air subwoofer
Impedance Single 2 or 4 Ohms
Resistance 1.9/3.6 ohms
Sd 490.9 cm2
Xmax 11.3/11.5 mm
Mms (g) 161.1/154.1
Voice Coil Size 2.5 inches
Fs 5 Hz
Vas 43.5/45.4 liters
Qms 3.00/3.80
Qes 0.83/0.93
Qts 0.65/0.75
Bl (T*m) 9.2/11.4
Le 0.8/1.4 mH
SPL 85.4/85.5 dB
RMS Power/ Peak 400 / 800 watts
REVO 12 HP S4
12 inch marine Subwoofer
Impedance Single 4 Ohms
Resistance 3.8 ohms
Sd 490.9 cm2
Xmax 11.9 mm
Mms (g) 201.1
Voice Coil Size 2.5 inches
Fs 30 Hz
Vas 47.4 liters
Qms 3.80
Qes 0.46
Qts 0.41
Bl (T*m) 17.7
Le 3.6 mH
SPL 86.3 dB
RMS Power/ Peak 500/1000
LIMITED WARRANTY
WHAT THIS WARRANTY COVERS
This is a Hlimited” warranty. This warranty covers any defect in materials and
workmanship. This warranty only covers the original purchaser and is not
transferable. This warranty is also only valid if the original purchase was
made from an authorized Wet Sounds TM dealer.
HOW LONG COVERAGE LASTS
This warranty extends for 2 years from the date of purchase. It is recommended
to REGISTER your warranty online within 45 days of purchase at www.
wetsounds.com – click on ”warranty registration”.
WHAT IS NOT COVERED
This warranty does not cover fading or discoloration caused by exposure to
sunlight or chemicals such as ammonia, household bleach, or any cleaning
material that contains abrasive substances. Wet Sounds, Inc. does not cover
the expense for removal or reinstallation. Additionally, shipping TO Wet
Sounds, Inc. must be paid for by the purchaser. This warranty is void and
inapplicable if Wet Sounds deems that the product was abused or misused;
including but not limited to damage caused by accident, mishandling, improper
installation, removing the inline fuse on the power connection, negligence,
normal wear and tear, excessive water or heat damage, freight/shipping damage,
or products that have been disassembled by anyone other than Wet Sounds
technical staff. Wet Sounds will not be responsible for any incidental or
consequential damages, except to the extent provided (or prohibited) by
applicable law. This warranty gives you specific rights, and you may also have
other rights which vary from state to state.
WHAT WET SOUNDS, INC. WILL DO
Wet Sounds, Inc. will repair any part of your product that proves to be
defective in materials or workmanship. In the event repair is not possible,
Wet Sounds will replace the product in question. If it is deemed necessary Wet
Sounds, Inc. will either replace the entire product with a refurbished unit or
it will be replaced with a model that is similar in price if that model is no
longer available. Labor costs and materials needed to complete this service
will be at No Charge to the purchaser. Additionally, return shipping FROM Wet
Sounds, Inc. to the purchaser will be paid for by Wet Sounds.
HOW TO GET SERVICE
Contact Wet Sounds, Inc. either by phone
(877-938-7757) or by email
(warranty@wetsounds.com). A service representative will assist you in
confirming that the problem you are experiencing is caused by a defective
product and if that product is covered under warranty. The service
representative will issue you a Return Manufacturer’s Authorization (RMA) and
other details to obtain service for your product.
DO NOT RETURN YOUR PRODUCT WITHOUT THE PROPER RETURN
AUTHORIZATION (RMA)!
INTERNET WARNING
Wet Sounds, Inc. products sold on any non-authorized web site or internet
auction site are void of any and all manufacturer’s warranty. Please contact
Wet Sounds (877-938-7757) or visit our
website (www.wetsounds.com) for a list of authorized on line sellers or to
find an authorized installing retailer near you.
WET SOUNDS INC.
www.wetsounds.com
877-938-7757
10621 S Sam Houston PKWY W Suite 100
Houston, Texas 77071 USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>