Shokz OpenComm 2UC Bone Conduction Stereo Headset User Manual
- May 15, 2024
- SHOKZ
Table of Contents
- Headset Controls
- ON/OFF
- Pairing to Mobile Device
- How to Wear
- Music and Calls
- Check Battery Status
- EQ Modes
- Switching EQ Modes
- Turn Multipoint Pairing On
- Turn Multipoint Pairing Off
- Restore Factory Settings
- Changing Languages
- Charging Tips
- Moisture Detection Alert
- Warranty
- Troubleshooting
- What’s in the Box
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shokz OpenComm 2UC Bone Conduction Stereo Headset User Manual
Headset Controls
ON/OFF
Turn on the headset :
Press and hold the Power/Volume + Button until the LED Indicator flashes blue.
Audrey will say, “Welcome to Shokz.”
Turn off the headset : Press and hold the Power/Volume + Button until the
LED Indicator flashes red.
Audrey will say, “power off.”
Pairing to Mobile Device
Operate controls with your headset powered off.
-
Start with your headset turned off.
-
Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately.
-
Select “OpenComm2 by Shokz” on your device’s Bluetooth settings. Audrey will say, “Connected”.
How to Wear
Slide the headset over your head, bring it to the back of your neck and position the ear-hooks on your ears.
Position the noise-canceling microphone close to your mouth.
Wearing your headset the wrong way could cause discomfort. Be sure you have
the transducers resting in front of your ears
Music and Calls
| Adjust volume| While your audio is playing, adjust the headset volume by
pressing either the “Volume +” or “Volume -” buttons. A “beep” will sound
when the volume is at its max.
Listening with your headset at a high volume may affect your hearing and the
audio will be distorte
---|---|---
Switching EQ Modes|
| Play/pause music| Click once
Next song| Double-click while music is playing
Previous song| Triple-click while music is playing
Switch languag| Double-click while pairing
Answer call| Click once when a call comes in
End call| Click once during a call
Reject call| Press and hold for 2 seconds when a call comes in
Answer an incoming call and end the current cal| Press and hold for 2 seconds
when receiving a second call
| Answer an incoming call and place the current on hold| Click once when
receiving a second call
Switching between two calls| Click once
Ending a call and switching to a call on hold| Press and hold for 2 seconds
Activate voice assistant| Press and hold for 2 seconds when the device is on
standby
| Mute microphone| Click once when on a call Audrey will say, “mute on”.
Unmute microphone| Click once when on a call *Audrey will say, “mute off”.
Check Battery Status
Operate controls while audio is
not playing
Power/Volume + Button
Volume – Button
How to check battery status :
Click the “Volume +” or “Volume -” button while music is paused, Audrey will
tell you what the battery status is:
“Battery high/Battery medium/Battery low/Charge me”
EQ Modes
Standard Mode
Balanced frequency for listening to music
Vocal Booster Mode
Enhanced intermediate frequencies for audiobooks, podcasts, etc
Switching EQ Modes
How to switch EQ mode : Press and hold both buttons (Power/Volume + Button and Volume – Button) while music is playing until you hear a beep.
Audrey will say, “Standard Mode/Vocal Booster Mode.”
Turn Multipoint Pairing On
- Start with your headset powered off
- Press and hold Volume + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.
- Press and hold the multifunction button and Volume + button until Audrey will say “multipoint enabled.”
- Open first device’s Bluetooth® menu and select “OpenComm2 by Shokz.”Audrey will say “connected”.
- Turn your headset off.
- Re-enter pairing mode by pressing and holding Volume + until Audrey says “pairing”and the LED indicator flashes red and blue alternately.
- Open second device’s Bluetooth® menu and select “OpenComm2 by Shokz.”Audrey will say “connected.”
- Turn your headset off.
- Turn your headset on. Your headset is now connected to both devices.
Turn Multipoint Pairing Off
- Start with your headset powered off.
- Press and hold Volume + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.
- Press and hold the multifunction button and Volume + button until Audrey will say “multipoint disabled.”
Restore Factory Settings
Operate controls with headset
powered off
Power/Volume + Button
LED Indicato
Audrey will say, “pairing.”
- Start with your headset powered off.
- Press and hold the “Volume +” button until Audrey says “Pairing”. The LED indicator will flash red and blue.
- Press and hold the multifunction button, Volume – button, and Volume + button until you hear two beeps and feel the vibration.
- Turn your headset off. The headset is now reset and can be re-paired to your device
Changing Languages
Your headset has four built-in languages: Chinese, English, Japanese and Korean.
Follow the instruction when your headset is powered off.
Audrey will say, “pairing.”
-
Start with your headset powered off.
-
Press and hold Volume + until Audrey says “pairing” and the LED indicator flashes red and blue alternately.
-
Double-press the multifunction button. Languages have been switched when you hear the corresponding language.
Charging Tips
The headset will automatically
shut down when charging
Magnetic Charging Cable
Charging
Charging Completed
When the headset is at low battery, there will be a “charge me” prompt and the red light will flash intermittently. Use the corresponding magnetic charging cable for charging.
The LED indicator will turn red during the charging process and the headset will automatically turn off. The LED indicator will turn from red to blue when charging is complete.
Moisture Detection Alert
How it Works:
These headset can detect liquid such as water, sweat, or rain. If the headset
is plugged into the charger while wet, the LED indicator will flash red and
blue. The headset will then emit a beep. If this happens, remove the charging
cable, dry them completely, then proceed with charging.
Warranty
Your headset is covered by a warranty. Visit our website at https://shokz.com/pages/warranty-landing for details of the limited warranty. *Failure to register will not affect your limited warranty rights
Troubleshooting
If you experience any issues or problems, please visit https://shokz.com/pages/faq for more support
What’s in the Box
OpenComm2 Box
OpenComm2 Headset
OpenComm2 Package
Magnetic Charging Cable
OpenComm2 User Guide
OpenComm2 Headset Legal Statement
If any part of your product is damaged or missing, do not use it. Contact authorized Shokz dealer or Shokz customer service.
Please note that the packaging envelope may vary depending on the sales region.