SHOKZ OPENRUN S803 Wireless Bone Conduction Headphones User Guide
- May 15, 2024
- SHOKZ
Table of Contents
SHOKZ OPENRUN S803 Wireless Bone Conduction Headphones User Guide
HOW IT WORKS
Headphone Controls
ON/OFF
Turn on the headphones :
Press and hold the Power/Volume + Button until the LED Indicator flashes
blue.
- Audrey will say : “Welcome to Shokz”.
Turn off the headphones :
Press and hold the Power/Volume + Button until the LED Indicator flashes
red.
- Audrey will say : “Power off”.
Pairing
-
Start with OpenRun turned off.
-
Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately.
-
Open your device’s Bluetooth settings and select ” Open Run by Shocks.” Audrey will say “connected.”
How to Wear
Pick up the headphones, bring them behind the back of the base of your neck, position the ear hooks on your ears, then enjoy your music
- Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.
Volume
Operate volume controls while audio is playing.
How to change volume :
While your audio is playing, adjust headphone volume by pushing either the Volume + or Volume – buttons
- A “beep” will sound when the volume is at its max.
- Listening with headphones at high volume may affect your hearing and the audio will be distorted.
Multifunction Button
- Play/pause music Click once
- Answer call Click once
- Next song Double-click while music is playing
- End call Click once
- Previous song Triple-click while music is playing
Multifunction Button
| Play music | Click once |
|---|---|
| Pause music | Click once |
| Next song | Double-click while music is playing |
| Previous song | Triple-click while music is playing |
| Switch language | Double-click while on pairing |
| Answer call | Click once |
| End call | Click once during a call |
| Answer call waiting and end current call | Press and hold for 2 seconds when |
receiving a second call
Ignore a call| Press and hold for 2 seconds during an incoming call
Activate voice assistant| Press and hold for 2 seconds when device is on
standby
Redial last number| Double-click on standby
- Only applicable for phone calls, not online calls
Check Battery Status
Operate controls while audio is not playing
How to check battery status :
Click the Volume + or Volume – button while music is paused, Audrey will tell you the battery status
- Battery high/Battery medium/Battery low/Charge me”
Extra Features
EQ Modes
Standard Mode :
Balanced frequency for listening to music
Vocal Booster Mode :
Enhanced intermediate frequencies for audiobooks, podcasts, etc.
Switching EQ Modes
Operate controls while music is playing
How to switch EQ mode :
Press and hold both buttons (Power/Volume + Button and Volume – Button) while music is playing until you hear a beep.
- Audrey will say : “EQ changed”.
Multipoint Pairing
Pair Two Devices
Switch between two devices seamlessly with multipoint pairing
Multipoint Pairing
Operate controls with headphones powered off
-
Start with your headphones powered off.
-
Press and hold Volume + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.
Audrey will say, “multipoint enabled. -
Press and hold the multifunction button and Volume + button until Audrey says, “multipoint enabled.”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>