SHOKZ OpenComm2 UC Stereo Bone Conduction Bluetooth Headset User Guide
- June 1, 2024
- SHOKZ
Table of Contents
SHOKZ OpenComm2 UC Stereo Bone Conduction Bluetooth Headset
Product Specifications
- Brand: Shokz
- Model: OpenComm2
- Wireless Technology: Bluetooth
- Charging Port: Magnetic
- Microphones: Dual Microphones
- EQ Modes : Available
- Additional Features: Multipoint Pairing, Language Settings
Product Usage Instructions
How It Works
The Shokz OpenComm2 headset offers various features like headset controls,
EQ modes, multipoint pairing, and language settings.
Headset Controls
The headset controls include the Power/Volume +/- Button, LED Indicator,
Multifunction Button, and Microphones for clear communication.
ON/OFF
To turn on the headset, press and hold the Power/Volume + Button until the
LED Indicator flashes blue. To turn off the headset, press and hold the same
button until the LED flashes red.
Pairing to Mobile Device
To pair with a mobile device, ensure the headset is off, then press and
hold the Volume + Button until the LED flashes red and blue alternately.
Select ‘OpenComm2 by Shokz’ on your device’sBluetooth settings.
Pairing to PC
For pairing with a PC, ensure the headset is on. Plug the included USB
adapter into a USB port on your PC to establish a connection. Set ‘Shokz
Loop110’ as the default input and outputdevice in your PC’s audio settings.
How to Wear
Slide the headset over your head, position the ear-hooks on your ears, and
place the noise-canceling microphone close to your mouth. Ensure the
transducers are resting in front of your ears for optimal comfort.
Music and Calls
Adjust volume using the Volume +/- buttons. Switch EQ modes by holding both
buttons simultaneously. Control music playback, answer or reject calls with
specific button actions as mentioned in the manual.
Frequently Asked Questions (FAQ)
-
How do I check the battery status of the headset?
The battery status can be checked by referring to the LED indicator on the headset which flashes different colors based on the battery level. -
How do I restore factory settings?
To restore factory settings, refer to the manual for specific instructions or contact customer support for assistance. -
What should I do if I encounter moisture detection alert?
If you receive a moisture detection alert, ensure the headset is dry before attempting to use it again to prevent damage. -
What is included in the box when purchasing the Shokz OpenComm2 headset?
The contents of the box typically include the headset, charging cable, USB adapter, user manual, and any additional accessories provided by the manufacturer.
How It Works
Headset Controls
ON/OFF
Turn on the headset :
- Press and hold the Power/Volume + Button until the LED Indicator flashes blue.
- Audrey will say, “Welcome to Shokz.”
Turn off the headset :
- Press and hold the Power/Volume + Button until the LED Indicator flashes red.
- Audrey will say, “power off.”
Pairing to Mobile Device
Operate controls with your headset powered off.
-
Start with your headset turned off.
-
Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately.
-
Select “OpenComm2 by Shokz” on your device’s Bluetooth settings. Audrey will say, “Connected”.
Pairing to PC
Operate controls with your headset powered off.
- Start with your headset turned on.
- Plug the included USB adapter into a USB port on your PC.
- Connection is established when Audrey says “Connected” or beeps, and the LED Indicator on the USB adapter is solid blue.
Configure
*To play music or take calls on the headset, please ensure the “Shokz Loop110” is both identified as the default input and output devices in your operating system’s audio settings.
How to Wear
Slide the headset over your head, bring it to the back of your neck and
position the ear-hooks on your ears.
- Position the noise-canceling microphone close to your mouth.
- Wearing your headset the wrong way could cause discomfort. Be sure you have the transducers resting in front of your ears.
Music and Calls
Wireless Adapter
-
Pair to a new headset
Press and hold for 2 seconds LED: Flashes red and blue rapidly -
Reconnect to the last connected headset
Click once LED: Flashes blue every second
LED on the adapter
Check Battery Status
How to check battery status :
- Click the “Volume +” or “Volume -” button while music is paused, Audrey will tell you what the battery status is:
- Battery high/Battery medium/Battery low/Charge me”
Extra Features
EQ Modes
-
Standard Mode
Balanced frequency for listening to music -
Vocal Booster Mode
Enhanced intermediate frequencies for audiobooks, podcasts, etc.
Switching EQ Modes
How to switch EQ mode :
- Press and hold both buttons (Power/Volume + Button and Volume – Button) while music is playing until you hear a beep.
- Audrey will say, “Standard Mode/Vocal Booster Mode.”
Turn Multipoint Pairing Off
- Start with your headset powered off.
- Press and hold Volume + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.
- Press and hold the multifunction button and Volume + button until Audrey will say “multipoint disabled.”
Restore Factory Settings
- Start with your headset powered off.
- Press and hold the “Volume +” button until Audrey says “Pairing”. The LED indicator will flash red and blue.
- Press and hold the multifunction button, Volume – button, and Volume + button until you hear two beeps and feel the vibration.
- Turn your headset off. The headset is now reset and can be re-paired to your device.
Changing Languages
Your headset has four built-in languages: Chinese, English, Japanese and
Korean.
- Start with your headset powered off.
- Press and hold Volume + until Audrey says “pairing” and the LED indicator flashes red and blue alternately.
- Double-press the multifunction button. Languages have been switched when you hear the corresponding language.
Care and Maintenance
Charging Tips
- When the headset is at low battery, there will be a “charge me” prompt and the red light will flash intermittently. Use the corresponding magnetic charging cable for charging.
- The LED indicator will turn red during the charging process and the headset will automatically turn off. The LED indicator will turn from red to blue when charging is complete.
Moisture Detection Alert
These headset can detect liquid such as water, sweat, or rain. If the headset
is plugged into the charger while wet, the LED indicator will flash red and
blue. The headset will then emit a beep. If this happens, remove the charging
cable, dry them completely, then proceed with charging.
Warranty
Your headset is covered by a warranty. Visit our website at
https://shokz.com/pages/warranty-landing for details of the limited
warranty. *Failure to register will not affect your limited warranty rights.
Troubleshooting
If you experience any issues or problems, please visit
https://shokz.com/pages/faq for more support.
What’s in the Box
If any part of your product is damaged or missing, do not use it. Contact
authorized Shokz dealer or Shokz customer service.
*Please note that the packaging envelope may vary depending on the sales region.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>