testo 5600 Smart Valve User Guide
- June 5, 2024
- testo
Table of Contents
testo 5600 Smart Valve User Guide
testo Smart Valve
0560 5600
| | | | |
---|---|---|---|---|---
ca. 95 x 119 x 47 mm (3.74 x 4.69
x 1.85 in)| 0.57 kg (20.10 oz) (with battery)|
9.0V (6LR61) alkaline battery| IP 54|
| 35
bar (507.63 psi)
Approval and Certification
| Product | testo smart valve |
|---|---|
| Mat.-No. | 0560 5600 |
| Date | 24.03.2022 |
The use of the wireless module is subject to the regulations and stipulations of the respective country of use, and the module may only be used in countries for which a country certification has been granted. The user and every owner has the obligation to adhere to these regulations and prerequisites for use, and acknowledges that the re-sale, export, import etc. in particular in countries without wireless permits, is his responsibility
| Country | Comments |
|---|---|
| Australia | |
| Canada | IC: 6127B-05605600 |
See IC Warnings
Europa + EFTA|
The EU Declaration of Conformity can be found on the
testo homepage www.testo.com under the product
specific downloads.
EU countries:
Belgium (BE), Bulgaria (BG), Denmark (DK), Germany (DE), Estonia (EE),
Finland (FI), France (FR), Greece (GR), Ireland (IE), Italy (IT), Latvia (LV),
Lithuania (LT), Luxembourg (LU), Malta (MT), Netherlands (NL), Austria (AT),
Poland (PL), Portugal (PT), Romania (RO), Sweden (SE), Slovakia (SK), Slovenia
(SI), Spain (ES), Czech Republic (CZ), Hungary (HU), Republic of Cyprus (CY).
EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland
WEEE Reg. no.:
DE 75334352
Japan| 201-210972
See Japan Information
South Korea|
R-R-te2-05605600
see KCC Warning
Turkey| Authorized
United King- dom (UK)|
The UK Declaration of Conformity can be found on the testo homepage
www.testo.com under the product specific downloads.
USA|
FCC ID: WAF-05605600
See FCC Warnings
Bluetooth® Information| Feature| Values
---|---|---
Bluetooth® range| Typical 50 m
Radio type| Bluetooth®
Low Energy (BLE) 4.2
Bluetooth® company| Lierda Science & Technology Group Co., Ltd
RF Band| 2402 – 2480MHz
Power output [E.I.R.P]| ≤10dBm
Bluetooth® SIG Listing| Declaration ID| D059666
Member company| Testo SE & Co. KGaA
IC Warnings
CAN ICES-003(B)/NMB-003(B):
This Class B digital apparatus complies with Canadian ICES-003.
RSS-Gen & RSS-247 statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Caution: Radio Frequency Radiation Exposure
This equipment complies with radio frequency exposure limits set forth by the
Innovation, Science and Economic Development Canada for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.
Co-Location:
This device must not be co-located or operated in conjunction with any other
antenna or transmitter.
FCC Warnings
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface.
This is to ensure continued protection against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment. Shielded
interface cable must be used in order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Radio Frequency Radiation Exposure
This equipment complies with radio frequency exposure limits set forth by the
FCC for an uncontrolled environment..
This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.
Co-Location:
This device must not be co-located or operated in conjunction with any other
antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>