ANKER A2538 Wireless Charger User Manual

ANKER A2538 Wireless Charger

LED Light Indicator

The right and left lights: Solid blue

The middle light: Flashing blue

|

Overvoltage or undervoltage protection activated

• You cannot charge your device wirelessly in these scenarios:
  • When using a case with a magnetic/iron plate;
  • When using a case with a pop socket;
  • When using an ultra-thick (> 5 mm) protective phone case.
• Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
• Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
• Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.

Important Safety Instructions

Please refer to the electrical and safety information on the bottom before installing or operating the product.

• Avoid dropping.
• Do not disassemble.
• Do not expose to liquids.
• For the safest and fastest charge, use original or certified cables.
• This product is suitable for moderate climates only.
• The maximum ambient temperature during use of this product must not exceed 40°C.
• Open flame sources, such as candles, must not be placed on this product.
• Only use a dry cloth or brush to clean this product.
• The socket-outlet shall be installed near the product and shall be easily accessible.
• Disconnection from line voltage should be made via the AC plug.

Specifications

Output

| Wireless: 5W / 7.5W / 10W (for phones) 5W Max (for earbuds)

USB-A: 5V __  1A

Operating Temperature| -10°C – 40°C

Radiated H-Field

| Radiated H-Field(for phones):9.44dBuA/ m(@10m)

Radiated H-Field (for earbuds) :-1.7dBuA/ m(@10m)

TX/RX Frequency Range| 110-205KHz (for EU / UK only)

FCC STATEMENT WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.

Anker Innovations Limited

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importer is the responsible party (contract for EU and UK matters) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom. This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. support@anker.com. support.mea@anker.com (For Middle East and Africa Only) (US) +1 (800)988 7973 Mon-Fri 6:15 – 17:00 (PT) (UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>