AKKIGL Projection Alarm Clock Radio, Digital Alarm Clocks for Bedrooms with USB Charger-User Instructions

: June 5, 2024
: AKKIGL

Table of Contents

AKKIGL

AKKIGL

AKKIGL Projection Alarm Clock Radio, Digital Alarm Clocks for Bedrooms

with USB Charger

Specifications

BRAND: AKKIGL
MATERIAL: Plastic
SHAPE: Rectangular
POWER SOURCE: Corded Electric, Battery Powered
DISPLAY TYPE: Digital
AGE RANGE (DESCRIPTION): Adults Kids Teens
MOUNTING TYPE: Tabletop
OPERATION MODE: Electrical
ITEM DIMENSIONS LXWXH: 6.7 x 1.18 x 3.74 inches
FM: 76.0MHz to 108.0MHz
VOLUME LEVELS: 16
SWITCH TIME: 12 or 24hr
OUTPUT: 5V/1A USB
INPUT: 5V/2A
USB OUTPUT: 5V/1A
PROJECTION ANGLE: 0 – 180°
PROJECTION DISTANCE: 1.5 – 13 ft
PROJECTION BRIGHTNESS: 4 levels (Medium-High-Low-Off)
LED DISPLAY BRIGHTNESS: 3 Levels (High-Low-Off)
ALARM SOUNDS: 7 tones (6 music tones + FM radio)

Introduction

With a brand-new adjustable projector, AKKIGL alarm clocks offer a crystal- clear projection on the wall or ceiling. There are 4 options for PROJECTION BRIGHTNESS (High, Medium, Low, Off), in addition to the adjustable LED display brightness. With this clock for the bedroom, you may turn the projection by 180 degrees at a time and change the projection clarity for unmatched readability. No need to turn your head to look at the time on the digital clock’s led display at night thanks to the adjustable angles. This alarm clock is more than just a projection; it also functions as a clock radio with wide FM radio channels (FM: 76.0MHz to 108.0MHz), 16 volume levels, and the option to set the radio to one of the alarm sounds. After you extend the improved antenna out, it helps you receive greater radio reception.

The alarm clock radio’s memory features allow for both automatic and manual searching of the radio stations. This digital alarm clock’s improved 6″ Large Clear LED display makes it simple for you to read the time, even if you’re far away or without glasses. If you are sensitive to light, you can decrease the display using this alarm clock’s 3 selectable DISPLAY BRIGHTNESS levels (high- low-off), which also allows you to protect your eyes. This alarm clock also has a 12 or 24 hour switch to suit your needs.

The bedroom alarm clocks from AKKIGL let you set two different alarms separately. You have a choice of 6 volume settings (30-90db) and 7 additional alarm sounds. Start your pleasant day by waking up to six gradual wake-up alarms or your favorite FM radio. When you hear the alarm, you can use the snooze function to extend your sleep by 10 minutes by hitting the large snooze button. You don’t have to worry about being late any longer because this alarm clock is simple to use. This projection alarm clock is particularly practical for charging your phone or other devices because it has a 5V/1A USB output. After a power loss or brief unplugging, you don’t need to reset the clock, alarm, or radios if you have a built-in cell button backup battery. The alarm clock is powered by an adapter and USB cable that are included. Please get in touch with us if you require any assistance. It comes with a comprehensive user manual and we also offer a 2-year quality assurance guarantee.

HOW DO I RESET MY ALARM WITHOUT THE CODE

Take the cover off.
Take the battery out.
Hold the tamper button while pressing it.
Holding the tamper button while inserting the battery. It will flash the LED light. Hold down the button until the flashing stops.
swap out the cover.

HOW DO I RESET MY ALARM AFTER CHANGING THE BATTERY

Disconnect all power sources, including the wiring of any hardwired alarms whose batteries need to be changed.
For 20 seconds, hold down the test/silence button.
Reconnect all the electrical sources (reconnect the wiring or plug back into the outlet).

FAQs

Why is my alarm still going off?
There is always a potential that the battery is weak or low. Sensors, detectors, and the panel itself all run on batteries in today’s networked smart homes. A new battery will soon be needed, and the alarm blaring is an inherent warning that the power is waning.
Why keeps beeping on my alarm keypad?
Look over your batteries. The majority of devices beep continuously to let you know when the batteries need to be changed. Both security panels and detectors share this characteristic. Use a battery tester to go through your home and check each battery connected to your security system.
In the settings, where is the clock app?
Tap the Apps icon (in the QuickTap bar) on the Home screen, then select the Apps tab (if necessary), followed by Clock.
Why is there a master code?
The Minimal Supersymmetric Standard Model (MSSM) can be fitted to various iterations of the data from currently available experiments using the MasterCode computer program.
If the battery dies, will the house alarm sound?
As long as there is a backup power source, house alarm systems do function without electricity. But bear in mind that even with a backup, the power source could still cut out, and the house alarm will sound if the battery runs out.
What occurs if you enter the incorrect code into an alarm system?
You must keep your code in mind, as using the wrong one could render you powerless. In addition, entering the wrong code can result in erroneous security alerts, costing you money in call-out fees to your security firm.
How do I modify the alarm’s password?
Start by punching the number 9 on your security system’s conventional keypad. Then, using the down-arrow button, scroll down until you see “user codes,” enter the user code you want to update. Choose this choice by pressing the pound or hashtag buttons.
A digital clock’s AM and PM settings are described.
Click the switch next to the 24-hour clock after clicking the ••• to the right of the clock to alter the format of the time display. To keep the interface tidy, the AM/PM unit will briefly appear when you switch to the 12-hour format and then fade away.
How do I turn off my alarm without my code?
Remove the home alarm console’s AC power directly from the wall. To unlock and open the system’s backing, use the access key that came with your console (or an alternative object, such a tiny screw). Finally, unplug at least one of the wires that are connected to the primary battery of the system, which is usually blocky and obvious.
Why are my automatic time and date incorrect?
Activate Android’s automatic time and date setting. Use Settings > System > Date & time to accomplish this. To start it, click the option next to “Set time automatically.” Turn this off, restart your phone, and then turn it back on if it is already activated.