USKEY VISION E-2 Extendable Tripod Phone Selfie Stick User Manual

June 5, 2024
USKEY VISION

CaptureUSKEYVISION E-2 Extendable Tripod Phone Selfie Stick-
LOGO

USKEY VISION E-2 Extendable Tripod Phone Selfie Stick

CaptureUSKEYVISION E-2 Extendable Tripod Phone Selfie Stick-
PRODUCT

Product Overview

CaptureUSKEYVISION E-2 Extendable Tripod Phone Selfie
Stick-fig-1

Package List

CaptureUSKEYVISION E-2 Extendable Tripod Phone Selfie
Stick-fig-2

  1. Smartphone clip
  2. Action camera adapter
  3. Extension pole tripod

How to Mount the Phone

Mode A: Stand Mode

  1. Take out the tripod
  2. Adjust the phone clip
  3. Install the phoneCaptureUSKEYVISION E-2 Extendable Tripod Phone Selfie Stick-fig-3
  4. Switch between horizontal and vertical shooting mode
  5. Unfold the tripod

Mode B: Handheld mode

  1. Take out the tripod
  2. Place the phone clip horizontally
  3. Install and unfold the phone clip
  4. Install the phone

Installing GoPro Camera

CaptureUSKEYVISION E-2 Extendable Tripod Phone
Selfie Stick-fig-7

  1. Take out the tripod
  2. Place the phone clip horizontally
  3. Flip and install the phone clip to make  sure the rubber pad  is facing up
  4. Install the GoPro adapter
  5. Install GoPro camera

Installing Camera

  1. Take out the tripod
  2. Place the phone clip horizontally
  3. Flip and install the phone clip to make sure the rubber pad is facing up
  4. Install the camera

Use of Extension Rod

Pull out the ball head from the extension monopod. If you need to shoot from a different height, the monopod can be flexibly extended by pulling the tripod ball head. The extension methods are shown below.CaptureUSKEYVISION E-2
Extendable Tripod Phone Selfie Stick-fig-11
Turn the ball head locking screw counter-clockwise, then adjust the upper part to your desired position. Turn the locking screw clockwise to tighten the ball head.CaptureUSKEYVISION E-2 Extendable Tripod Phone Selfie Stick-
fig-12

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals