Shenzhen Joint JT707A E-Seal Tracker with GPS Tracking User Manual

Shenzhen Joint JT707A E-Seal Tracker with GPS Tracking

Application

Guidance for internal techniques and customer support

StandardIntroduced

IEC60529/GB4208-2008 Housing Protection Level

Product Introduction

JT707A, an Intelligent E-lock for mobile assets management solutions, boasts a tiny size, easy installation, and low cost which supports GPS. Real-time tracking information for assets and remote changing of product configuration is available. Coupled with rechargeable or disposable Li-ion battery, JT707 can be re-used or one-time-used, which is a set of safe, intelligent, and convenient solutions for mobile assets management.
Product and Accessory
Include JT707A device:

FunctionIntroduction

Remote Tracking of Device’sStatus
The device’s status can be captured by means of real-time trackings, such as speed, direction, GPS location, and status of the lock rope, which secures the shipping in a more efficient way.
Smart Working Mode
The device in sleep can be waken up by inserting or cutting rope. It would be convenient for clients to be kept informed of assets’ location and other status by uploading real-time data, which enables them to act accordingly and secures reliability in transit. A power-saving mode will be activated by default if the device is disconnected for a long time.
Status of LockRope
The real-time status of the lock rope will be uploaded on the user platform, following the GPS data as well. It would be crystal clear for clients to be kept informed of the status of the current asset; The rope cut will be counted which enables maximum use for clients.
RED LED Status
ON 500ms, OFF 500ms, means registered network successfully; ON 100ms, OFF 100ms means connected to a server and sending data; OFF always, means a device in sleep mode.
Function &Performance

1.  Inbuilt ESIM can support data only, can not support SMS;

2.  When deice work in sleep mode, can not use SMS

Content| Live data, Blind area data, Alarms
Smart Wake-up| Fixed-time wake-up or triggered by rope-cutting
Alarm| Alarm| Rope-cutting alarm
 |  | Low battery alarm|
---|---|---|---
Battery| Battery management| Recharge Li-ion battery, capacity 1500mAh;
Low battery management
Configuration| Configuration| USB PORT, GPRS

Continuous Working Period

No.| Upload Interval| GPS, GSM Signal Normal to Work| GPS, GSM Signal Poor to Work
---|---|---|---
1| 30 Minutes/Per Data| 16 Days| 8 Days
2| 4 Hours/Per Data| 101 Days| 55 Days
3| 12 Hours/Per Data| 200 Days| 128 Days
4| 24 Hours/Per Data| 264 Days| 193 Days

Battery Capacity: 1500mAh

Operation Device

Recharge

Put the device on the “Config&Recharge BOX”, switch to recharge status, the “Config&Recharge BOX” the other side connects to the adapter, then red LED will be light.
Note: LED turn to green means full charged.
Note: When you are using adapter output 5V/1A, recharge to 90%, will spend 100 minutes, recharge to 100%, will spend 150 minutes.

Device Configuration
PC tool to configure a device

Put the device on the “Config&Recharge BOX”, switch to config status, the “Config&Recharge BOX” the other side connect to computer, then the green LED will be light.
Then install the config cable driver.

Check the cable driver and COM port status.

Running the PC tool to set device parameter

GPRS/SMS(Inserted Micro SIM Card)
To Query Terminal’s Basic Information

Commands

descriptions

| Query terminal version
Premise of

commands

| no
Parameters

descriptions

| no
Relevant function descriptions| Returns the following message：

1.  Terminal version

2.  Alias of the terminal ID

3.  GSM model version

4.  SIM card’s CCID

5.  IMEI of the GSM model

6.  GSM Internet information of community

Expectations returns| (700160818000,1,001,BASE,1,1,20150418_G300,0,BeiHuan,1137B03SIM90 0M64_ST_MMS,

89860042191130000000,89860042191130272549,012207005620932,460,

00,4243,6877)

No.| example| description
1| 20150418_G300| Current terminal version

2

|

0, BeiHuan

| The 0 means English, while 1 means Unicode of other languages.,” BeiHuan” is expressed by ASCII code. For example, there are 8 bytes for alarm(62A58B66). Here is English with the

name of” BeiHuan”.

3| 1137B03SIM900M6

4_ST_MMS

| GSM model version
4| 8986004219113000

0000

| I’M ICCID
5| 8986004219113027

2549

| Micro SIM cardICCID, empty if no SIM card
6| 012207005620932| IMEI of GSM model
Send commands| (700160818000,1,001,BASE,1)
---|---
Commands

descriptions

| Query terminal version
Premise of

commands

| no
Parameters

descriptions

| no
Relevant function descriptions| Returns the following message：

1.  Terminal version

2.  Alias of the terminal ID

3.  GSM model version

4.  SIM card’s CCID

5.  IMEI of the GSM model

6.  GSM Internet information of community

Expectations returns| (700160818000,1,001,BASE,1,1,20150418_G300,0,BeiHuan,1137B03SIM90 0M64_ST_MMS,

89860042191130000000,89860042191130272549,012207005620932,460,

00,4243,6877)

No.| example| description
1| 20150418_G300| Current terminal version

2

|

0, BeiHuan

| The 0 means English, while 1 means Unicode of other languages.,” BeiHuan” is expressed by ASCII code. For example, there are 8 bytes for alarm(62A58B66). Here is English with the

name of” BeiHuan”.

3| 1137B03SIM900M6

4_ST_MMS

| GSM model version
4| 8986004219113000

0000

| ESIM ICCID
5| 8986004219113027

2549

| Micro SIM cardICCID, empty if no SIM card
6| 012207005620932| IMEI of GSM model

To Set Query/Set Master &Slave IP address and port, APN, user name, and password

Send

commands

| (700160818000,1,001,BASE,10,1,211.154.112.98,1088,211.154.112.99,108

8,CMNET,abc,123456)

---|---
Command descriptions| Query/Set Master &Slave IP address and port, APN , user- name and password
Premise of

commands

| no
Command- parameters descriptions| To Set parameter：

1,211.154.112.98,1088,211.154.112.99,1088,CMNET,abc,123456

1 Function of commands：

0 means query ESIM parameters, the later parameters can be ignored， eg：(700160818000,1,001,BASE,10,0)

2 means query Micro SIM card parameters, the later parameters can be ignored，eg：(700160818000,1,001,BASE,10,2)

1 means setting ESIM parameters, (700160818000,1,001,BASE,10,1,211.154.112.98,1088,211.154.112.99,108 8,CMNET,abc,123456)

Main IP, PORT: 211.154.112.98,1088 Backup IP, PORT: 211.154.112.99,1088 ESIM APN: CMNET

APN user: abc

APN password: 123456

3 means setting micro SIM card parameters, (700160818000,1,001,BASE,10,3,211.154.112.98,1088,211.154.112.99,108 8,CMNET,abc,123456)

Main IP, PORT: 211.154.112.98,1088 Backup IP, PORT: 211.154.112.99,1088

Micro SIM card APN: CMNET APN user: abc

APN password: 123456

 |  | Items can set null

If the backup IP & port no need to set, user-name and password will be the

following： (700160818000,1,001,BASE,10,1,211.154.112.98,1088,,,CMNET,,)

|
---|---|---|---
211.154.112.98IP address: server address for uploading GPRS.

PS: The first IP is master IP and the latter is slave IP.

1088 port: No. Of server port; PS: The first IP is master IP and the latter is

slave IP.

CMNET APN name: within 32 bytes
ABC,123456 user-name, and password: both within 20 bytes
Relevant descriptions of function| When setting the master IP， it will immediately reconnect to the newly set master IP after the terminal response

When the master IP fails to connect, the terminal will query if there is an IP setting automatically; If detects, it will connect slave IP.

Expectations

return

| (700160818000,1,001,BASE,10,211.154.112.98,1088,211.154.112.98,1088,

CMNET,abc,123456)

Feedback descriptions| feedback： 211.154.112.98,1088,211.154.112.98,1088,CMNET,abc,123456: .Same as

above

To Query/Set upload,Sleep, Periodic wake-up Interval

Commands

descriptions

| Query/Set upload ,sleep,periodic wake-up interval
Premise of

commands

| no
Command- parameters description| Set parameter：1,60,30,30
1command function：0 means query; If it’s 0，the following can be ignored，eg(700160818000,1,001,BASE,6,0)

1 means setting.

60–upload interval( Motion), unit by the minute. For the upload contents, please see”2.8positioning data” This value is set 30 minutes as default. The

the minimum value is 30 minutes and the maximum of 1440 minutes(12h).

30–Fixed as 30, reserved.
30–upload interval( Static), unit by the minute. For the upload contents,

please see”2.8positioning data” This value is set 30 minutes as default. The

minimum value is 30 minutes and the maximum of 1440 minutes(12h).

Relevant descriptions of

function

| no
Expectations

return

| (700160818000,1,001,BASE,6,60,30)
Feedback| feedback：60,30:same as above setting

Install Micro SIM Card

Insert Micro SIM Card, then recover the top side cover.

Note: Device within Embedded-SIM, as below picture:

EnvironmentAdaptation

• Low-temperature type battery
  Temperature: -40℃~55℃

• High-temperature type battery
  Temperature: -20℃~75℃

• Humidity
  It can work for 48 hours under the testing of +50℃and 95% non-condensing humidity.

• Impact
  The device will be intact under the testing of a half-sine wave, 5G acceleration, and pulse duration of 11ms by impacting three times from each axis. The device functions well during and after testing.

• Vibration
  Scanning range:5Hz–300Hz. Scanning speed: 1oct／min Scanning time: 30 minutes in each direction

• Housing Protection grade
  The housing of the Intelligent device is compatible with the requirements of IP65 in GB/T4208-2008

• Electromagnetic Compatibility
  The immunity of ESD is compatible with the requirements of GB/T17626.2. With the testing grade of 7kv accepted contact discharge and 14kv air discharge, grade B is judged. The immunity to radiation can meet the requirements of GB/T17626.3. With filed strength of 24V/m and frequency of 20MHz–6000MHz, grade B is judged.

• Installation Compatibility
  Ways: Locked by bolting and unlocked by rope-cutting

CoreParameters

Basic parameters

| Size| 46mm21mm52mm
---|---|---

Length of Lock Rope

| ****

300mm, with a unique ID for each rope

Weight| about 67g
Housing material| Nylon
Protection grade| IP67
Working Temperature| -10°C — 45°C
Storage Temperature| -40°C — +85°C
Relative Humidity| 5%—95%

Working Current

| Av. current<100mA Standby：<20uA
Battery Capacity| 1500mAh,3.7v rechargeable Li-ion, 500 data upload supported
GPS Antenna| Built-in
GSM Antenna| Built-in
SIM| Micro SIM Card
 |  | ****

GSM

| 2G:

GSM 850MHz/900MHz,DSC1800MHz,PCS1900MHz。

Communication Mbps:

GPRS data downstream traffic: Max 85.6kpbs GPRS data upstream traffic: Max 85.6kpbs Coding format:

CS-1、CS-2、CS-3 and CS-4

Embedded protocol

TCP

|
---|---|---|---|---
 | ****

GPS module

| GPS and Beidou are both supported
 | GPS| Beidou

Sensitivity

| Track -167dBm Capture           – 149dBm Re- capture -161dBm

Frequency

| GPS L1

Frequency (1575.42MHz)

| ****

BeiDouB1 (1561.10MHz)

Start speed

| Hot start <1s Cold start

35s(typical

value)

|
Accuracy| <10 meters|

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body: Use only the supplied antenna.

References

• decimal - Bing Dictionary
• hexadecimal - Bing Dictionary

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>