SANTOS 37-4P Liquefying Kitchen Blender 37 User Manual

June 3, 2024
SANTOS

SANTOS LOGO

KITCHEN BLENDER SANTOSAFE N°37
USER AND MAINTENANCE MANUAL
IMPORTANT: documents included in this manual to be kept:
• “CE” COMPLIANCE DECLARATION
• WARRANTY CERTIFICATE
Translation of the original version

SANTOS 37-4P Liquefying Kitchen Blender 37

Read the instructions for use before unpacking the appliance.
Coffee grinders – Fruit juicers – Mixers – Blenders – Drinks dispensers – Planetary mixers
Cheese graters – Ice crushers – Mincers – Vegetable slicers – Dough mixer
MODELES DEPOSES FRANCE ET INTERNATIONAL

“CE” COMPLIANCE DECLARATION

THE MANUFACTURER:
SANTOS SAS – 140-150, Av. Roger SALENGRO 69120 VAULX-EN-VELIN (LYON) FRANCE declares that the appliance is intended for the professional market described below:

Description: MIXER
Type number: 37

complies with:

  • the statutory provisions defined in appendix 1 of the European “machines” directive n°2006/42/CE and the national legislation transposing it
  • the statutory provisions of the following European directives and regulations:
    • N° 2006/95/CE (low voltage directive)
    • N° 2004/108/CE (EMC directive)
    • No. 2002/95/CE (RoHS directive)
    • No. 2002/96/CE (WEEE directive)
    • N° 1935/2004/CE (regulation) relating to materials and articles intended to come into contact with foodstuffs

Harmonized European standards are used to give the presumption of conformity with the essential requirements of the above-mentioned directives:

  • NF EN 12852+A1: 2010, Food processing machinery – Food preparation equipment and blenders – Safety and hygiene requirements.
    This European standard is a type-C standard as defined in EN ISO 12100. When the provisions of this type-C standard differ from those stated in the type-A or B standards, the provisions of the type standard override the provisions of the other standards. This standard provides the means to comply with the requirements of the “machines”
    directive n°2006/42/CE, (see appendix ZA)

  • NF EN ISO 12100 -1 and 2:2004: Safety of machinery – General principles for design

  • NF EN 60204-1: 2006: Safety of machinery – Electrical equipment of machines general requirements

  • NF EN 1672-2: 2005, Food processing machinery – Basic concepts – Hygiene requirements

  • NF EN 60335-1: 2013: Household and similar electrical appliances. Safety.

  • NF EN 60335-2-64:2004: Particular requirements for commercial electric kitchen machines

Drawn up in VAULX-EN-VELIN on: 01/02/2014
Signatory’s position: CHIEF EXECUTIVE OFFICER
Signatory’s name: Aurélien FOUQUET

SANTOS 37-4P Liquefying Kitchen Blender 37 - icon 2

SAFETY RULES

At the time of use, maintenance or scrapping of the appliance, always ensure that the following elementary precautions are adhered to.
Read the explanatory instructions in full
Keep this user manual

Note: You will find it easier to understand the next few paragraphs if you refer to the diagrams at the end of this manual

INSTALLATION AND HANDLING
It is prohibited to hold the appliance by the rod (1) or locking lever (2)
The appliance can be installed by one person alone. For ease of use, you are advised to place the appliance on a table or work surface to easily add the ingredients or to monitor the progress (recommended height: 90 cm, to be adapted as required for the user).

DO NOT:

  1. Plunge the base in water or any other liquid for reasons of protection against risks of electrocution.
  2. Use this application to blend, grind or emulsify anything other than foodstuffs
  3. Pass the pits through the appliance. Remove the pits from fruits before passing them in the appliance (e.g. mangos, apricots, peaches).
  4. The appliance is not designed for processing frozen foods.
  5. Do not insert solid ingredients into the mixer before switching it on.
  6. Do not operate the appliance with the jar empty.
  7. Do not remove the jar until the blades have stopped completely.
  8. Never leave water permanently in the jar.
  9. Neither a water spray nor a pressure spray should be used for cleaning
  10. Never attempt to change the blades with the jar on the base.
  11. Be careful not to get burnt when preparing hot products. The surfaces of the jar and lid may be very hot
  12. Insert or store kitchen utensils in the jar.
  13. Operate the appliance if the jar or a blade is chipped, cracked or broken. Never use a jar if there is any play with respect to the blade.
  14. It is forbidden to operate the appliance on a surface with a slope in excess of 10° relative to the horizontal plane. All 5 feet of the appliance must always be resting on this surface.
  15. Use of spare parts other than certified original SANTOS parts is prohibited.
  16. use the unit with a damaged power cord. it must be replaced by an authorized dealer or by SANTOS company, or by similarly qualified persons in order to avoid a hazard.
  17. The appliance must be unplugged before any intervention on it: cleaning, general care, or maintenance.
  18. Connect several appliances to the same power socket.
  19. Use the appliance outdoors.
  20. Never place the appliance close to or on a source of heat.
  21. This appliance is a professional machine designed exclusively for professional use. It is not designed for household use.
  22. **** This appliance is not designed for use by people (including children) whose physical, sensorial or mental capacities are impaired or by people with no experience or knowledge unless they have been supervised or given training in the use of the appliance beforehand by a person responsible for their safety. Supervise children to ensure they do not play with the appliance.

ELECTRICAL CONNECTION:

  • The appliance’s power supply is available in two single-phase voltages:
    – 100-120 V 50/60 Hz:
    – 220-240 V 50/60 Hz:
    Line protection: the appliance must be connected to a standard 2 pole + earth socket. The set-up must be fitted with a differential circuit breaker and a 16A fuse. Earthing of the appliance is compulsory.

TAKE CARE:

  • Before connecting the appliance, check that the mains electrical voltage is the same as the voltage for your appliance. Its value is shown:
  • either on the identification plate under the appliance.
  • or on the identification plate on the last page of this manual.
  • If the power cord is damaged, it must be replaced by an authorized dealer or by SANTOS company, or by similarly qualified persons in order to avoid a hazard. TAKE CARE: Check that the on / off switch (3) is in position “OFF” before plugging the power cord into the mains power socket.

1st TIME USE
Be careful not to get cut when handling the blades or cleaning inside the jar.

Thoroughly clean all parts in contact with the food.
Wash the following with a standard dishwashing product: jars (6), lids (7), and caps (8).
You are not advised to wash the lid seals (9) in a dishwasher.

This appliance is marked with the symbol of the selective waste sorting system relating to waste electrical and electronic equipment. This means that this product is covered by a selective sorting system in compliance with the 2002/96/CE Directive (WEEE) – part relating to appliances for professional use – so as to be either recycled or dismantled with a view to reducing any impact on the environment.
For further information, you can contact SANTOS or your local dealer.
For the disposal or recycling of the appliance components, please refer to a specialist company or contact SANTOS.
Electronic products not covered by a selective sorting system are potentially dangerous for the environment.
The packaging material should be disposed of or recycled in accordance with the regulations in force.

DESCRIPTION OF APPLIANCE

Mixer N° 37 is an electrical appliance designed to blend, grind and mix different foodstuffs in the form of liquids, doughs/batters or solids.
The most common applications relate to the following preparations:

  • COOKING: soups – cream soups – sauces – creams – mousses
  • DESSERTS: creams – stewed fruit – batters – milk-shakes – flans – mousses…
  • DRINKS: fruit, vegetable cocktails – punches – syrups – sangria.

USING THE APPLIANCE

Do not operate the appliance with the jar empty.

USING FOR THE 1st TIME:
Locking the jar clamping rod:
For your safety, the appliance can only operate when the jar (6) is closed by its lid (7) and correctly positioned on the base (4).
Push the handle (2) down to lock or then down again to unlock the jar clamping rod (1).
When in the unlocked position (rod in top position), place the jar closed by its lid on the base (4).
Push the handle (2) down to lock the jar (6) (rod in lower position).
Turn the rotary switch (3) to start up the motor and set the desired speed.

SANTOS 37-4P Liquefying Kitchen Blender 37 - fig 2

Operation:

The mixer must always operate with a minimum of liquid in the jar in order to drive solid foods toward the blades.
Maximum speed with rotary switch: 15,000 rpm The speed with PULSE button: 18,000 rpm

Stopping the appliance:
There are two ways to stop the appliance:

  1. Turn the rotary switch (3) to “OFF” to stop the motor completely, then operate the handle (2) to release the jar. Wait until the blades have stopped completely before removing the jar from the base.
  2. During operation at a set speed, push the handle (2) down to unlock the clamping rod
    (1). This operation will stop the appliance without altering the speed adjustment. Wait until the blades have stopped completely before removing the jar from the base.

Rotation speed:
The rotation speed of the blades must be adapted to the results desired and the type of foodstuffs to be processed.

Mixing solid foods:

Dice up dry ingredients and insert them through the opening in the lid (7) when the appliance is in operation.
Increase the size of the cubes according to the quantity of food already mixed or “puréed” in the jar.

Ice:
Do not use the blades to crush blocks of ice.
Small ice cubes like those produced by the majority of automatic ice makers can be crushed at low speed.

Making a mayonnaise:
Put all the ingredients in the jar except for the oil. During operation, remove the cap (8) from the lid and add the oil a little at a time pouring it in evenly.

CLEANING
Be careful not to get cut when handling the blades or cleaning inside the jar.

IMPORTANT:

  • Stop the appliance and unplug the power cord from the appliance.
  • The appliance should neither be cleaned in a water spray nor with a pressure spray
  • The motor unit (4) must not be immersed in water.
  • Do not use an abrasive sponge to clean the plastic jar (6).
  • Do not hermetically close the jar when the appliance is stored away (remove the cap (8) from the lid).

You are advised to clean the appliance as soon as you have finished using it. It will be easier to clean if you do not allow the remaining scraps of food to dry.
For thorough cleaning, take apart the parts of the jar (unscrew the jar (6) from the handle base (5)) and wash them with hot soapy water, rinse and dry.
The base can be cleaned using a soft, wet sponge.

SANTOS 37-4P Liquefying Kitchen Blender 37 - fig 4

MAINTENANCE
Prior to carrying out any intervention on the appliance, it must be disconnected from the mains without fail.

Changing the coupling system:
When changing the couplings, make sure you adhere to the position of each component:

  • flexible coupling (11) on the motor unit
  • rigid coupling (12) on the blade holder.

IMPORTANT:
Motor end:
Turn the screw (13) counterclockwise to remove the flexible coupling (11).
Blade end:
Turn the screw (14) counterclockwise to remove the rigid coupling (12).

SANTOS 37-4P Liquefying Kitchen Blender 37 - fig 5

REMARKS: for N°37 versions prior to 2012, screw (13) must be turned clockwise to remove the flexible coupling (11).

Spare parts:
IMPORTANT: use of spare parts other than certified original SANTOS parts is prohibited

This machine requires no specific maintenance. The bearings are lubricated for life.
If any intervention is necessary to replace parts subject to wear, such as the couplings, blades, jar seals, electrical or other components, please refer to the parts lists (see the exploded view at the end of this manual).

For all spare part orders (see references in the exploded view at the end of the manual), state:

  • the type
  • the appliance serial number and
  • the electrical specifications are given under the appliance.

Identifying the cause of appliance stoppage with precision.
If the problem persists, switch off the power supply to the appliance (unplug the cord from the mains socket) and call in the maintenance service or contact a SANTOS-approved dealer.

The machine will not start:

  • Check: the mains supply, the condition of the power cord
  • To run the motor of the mixer the jar (6) with its lid (7) closed must be placed on the base (4) and locked using the clamping rod (1).
  • Check that there is no food that is too hard or big jamming the blades (10).

The appliance stops following an overload:

  • If the motor stalls during operation, reduce the load and allow the appliance to cool down for several tens of minutes.
  • Check that there is no food that is too hard or big jamming the blades (10).

The motor runs but the blades do not rotate:

  • Check the condition of the coupling system. If required, change the 2 parts at the same time. (see “maintenance” section)

APPLIANCE TECHNICAL SPECIFICATIONS

Model n° 37
Power supply voltage (V) 220-240
Frequency (Hz) 50/60
Motor
Input power (W) 1550
Max. current (A) 8
Speed (rpm) 0 to 18000
2L jar capacity (L) 2
4L jar capacity (L) 4
Dimensions: Height (mm) 566
Width (mm) 220
Depth (mm) 303
Weight: Net weight (kg) 12
Packaged weight (kg) 14
Noise: (2) LpA accuracy K pA = 2.5dB (d BA) 66
  1. These ratings are given for your guidance. The exact electrical specifications of your appliance can be found on the rating plate.
  2. Noise level measured in acoustic pressure of appliance loaded as per the standard ISO 11201:1995 and ISO 4871:1996.
    Appliance placed on a work surface at 75cm from the floor. The microphone turned towards the appliance at 1.6 m from the floor and 1 m from the appliance.
ITEM Description
Clamping rod
Locking handle
Switch, speed adjustment
Motor unit
Jar handle
Jar
Lid
Cap of lid
Lid seal
Blade assembly
Flexible motor coupling
Rigid jar coupling
Motor coupling screw
Blade coupling screw
PULSE button

Electrical wiring diagram:
220-240V 50/60Hz wiring diagram

SANTOS 37-4P Liquefying Kitchen Blender 37 - fig 6

SANTOS 37-4P Liquefying Kitchen Blender 37 - fig 7

SANTOS 37-4P Liquefying Kitchen Blender 37 - fig 8

WARRANTY CERTIFICATE

WARRANTY
Since 01.01.95, all our appliances comply with CE and possess the CE label. Our guarantee is of 24 months from the manufacturing date mentioned on the descriptive plate, except concerning the asynchronous motors (consisting of a rotor and a stator) which are warranted for 5 years from their manufacturing date. Warranty is strictly limited to the free replacement of any part of origin recognized by us as defective due to a defect or building default and identified as belonging to the concerned appliance. Warranty does not apply to damages resulting from installation or use noncomplying with our appliance data sheet (user’s manual) or in case of an evident lack of maintenance or disrespect of elementary security electric rules. It does not apply in case of regular wear and tears. Any replacement of parts under warranty will be realized after the return of the defective part in our workshops, postage paid, supported by a copy of a conformity statement on which appears the serial number of the appliance. Every appliance is equipped with a descriptive plate conforming to the EC recommendations and of which a duplicate exists in the conformity statement (serial number, manufacturing date, electrical characteristics …). In case of serious damage judged repairable only in our workshops, and after prior consent from our departments, any appliance under guarantee is sent by the Distributor, and carriage is paid. In case of repairs or reconditioning of appliances not under guarantee, the round trip transport is payable by the distributor. The parts and workforce are invoiced at the current rate. A preliminary estimate can be supplied.
Coffee grinders not using SANTOS original burrs are not taken under guarantee. The warranty conditions, repairs, and reconditioning, of the espresso coffee grinder, are the object of a specific note. Our guarantee does not extend to the payment of penalties, the repair of direct or indirect damages, and notably to any loss of income resulting from the non-conformity or the defectiveness of products, SANTOS’s global responsibility being limited to the sale price of the delivered product and to the possible repair of the defective products. In case of revelation of imperfection during the warranty period, the Distributor has to, unless a different written agreement of SANTOS, indicate to his customer to stop any use of the defective product. Such use would release SANTOS of any responsibility.

APPLIANCE IDENTIFICATION PLATE

SPECIMEN
For all documents not supplied with the appliance.
Printed, Faxed, and Downloaded
www.santos.fr

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals