Adjacent Audio B22 Compact and Portable Bluetooth PA Speaker User Manual

Adjacent Audio B22 Compact and Portable Bluetooth PA Speaker

GENERAL DESCRIPTION

This Compact and Portable Bluetooth PA Speaker by Adjacent Audio proYides wireless entertainment and gives you easy access to your music. It has a Bluetooth system so you can easily stream music from your iPhones, Androids, iPads, Tablets, PCs, and so on.

FUNCTIONAL DESCRIPTION

Control Panel

❶

| Microphone Volume
---|---
❷| Bass
❸| Master Volume
❹| Record
❺| Repeat/Light
❻| Echo
❼| Mode
❽| Previous
❾| Next
❿| EQ
⓫| Play/Pause
⓬| Min In
⓭| TF Card Slot
⓮| USB Flash Drive Slot
⓯| Auxin
⓰| USB SV Charging Port

⓱

| Power On/Off

Digital Display

[ ] Under ‘USB/TF Card’ mode, this symbol Indicates speaker In ‘Pause’; Under ‘Line in’ and ‘FM’ mode, this symbol Indicates speaker In “Mute’.
[ ] Under ‘USB/TF Corc:f mode, this symbol ls ON.
[ ] When a wired or wire less microphone rs connected. this sumbol ls ON.
[ ]Under “Line In’ mode, it will display “LINE IN’; under ·FM’ mode, It will display current radio channel; under “USB/TF Card’ mode, it will display song playing time.
[ ] When recording, this symbol ls ON.
[ ] When the battery is low, this symbol is ON. Please insert a USB 5V cable to charge the speaker. When the battery is low, speaker volume will drop to 70%.

Bluetooth

Bluetooth Connection: Press the mode button to enter into Bluetooth mode. Turn on Bluetooth on your Bluetooth devices. Choose Bluetooth device ‘AdJacent.B22’. and connect. There will be a sound from the speaker after the device is connected.
Discannect Paired Device/Re-pair Device: Enter Into the Bluetooth mode, hold the “Mode” button for at least 3 seconds. The speaker will disconnect its paired device and enter into a pairing waiting state.
[ ]: Short press to play or pause the sound.
[ ][ ]: Short press for previous/next song.

Wireless Microphone

Note: This product contains two wireless microphones. Each microphone requires 2 AA batteries (Batteries Not Included).
Turn On/Off: Slide the switch upward to turn on the microphone. The “MIC will light up on the digital display. Slide the switch downward to tum off the microphone.
Standby Mode: When the switch Is In the middle, the microphone is In standby mode.
Saeeching Sound Issue : Please keep the microphone at least 1 meter or 3 feet away from the speaker, or It Will cause a screeching sound.

Light

Choose Light Mode: Hold the “REP/Light’ button to choose a light mode.
TUm On/Off the Light: Short press the ‘REP/Light’ button twice to tum on/off the light.

EQ

Note: EQ function only works for USB/TF mode.
EQ Mode selection: Short press the “EQ’ button to select a mode: normal, rock, pop, classic, Jazz, country.

AUX IN

Note:

• The speaker hos o 3.5 mm AUX IN jack for Auxiliary input (AUX cable not included).
• The speaker will automatlcallu enter Into AUX IN mcde when you connect with on AUX cable.

MIC IN

Note

• The speaker has a 6.0 mm MIC IN jack for on additional microphone.
• Plug In the wired microphone Into the MIC IN jock end use It.
• If you wont to connect on addltlonol wireless microphone with a receiver, simply connect the wireless receiver via the ‘MIC IN’ jack. Please note that the frequencu of the wireless microphone cannot be the same as 256.1MHz or 261.8 MHz, otherwise it will cause interference.

FM

Note: Please search the station automatically the first time !JOU use it. FM Range: 87.5 MHz -108.0 MHz.
Search Station Automatically: Press the mode button to enter into Radio mode. Hold the ‘Play/Pause’ button to search radio stations automatlcally. The speaker will store stations automatically, as ‘P01’, ‘P02’, etc. on display. When searching for stations, you can stop searching by pressing the [ ] button.
Listen to the Radio: After searching, press [ ] or [ ] button to select a saved station.

ECHO

Note: Please note that the ECHO only works for the microphone. It does not work on the background music.
How to Use ECHO: Press the ‘ECHO’ button to select the intensity of the reverb. There are 4 levels:
EOO, E01, E02, E03. EOO Is off, and E03 Is the strongest.

MP3 Function

USB: Insert USB drive will automatically play songs from the USB drive (MP3 format only).
TF: Insert TF Cord will automatlcally play songs from the TF Cord (MP3 format only).
[ ]: Short press to play or pause the sound.
[ ]: Short press to select the previous song.
[ ]: Short press to select the next song.

Record

Important Note-:

• The speaker needs a USB/TF to record
• When recording, the USB/TF should hove at least 1 GB of free storage space. If the recording file exceeds free storage space, the recording will fail.
• This speaker can not operate with a USB/TF that exceeds 32 GB, Use a USB/TF less than 32 GB,
• Turn on the microphone before recording.
• The recording file format is MP3.
• Please note that the speaker can not play music In recording mode.

How to Record:

1. Insert the TF card or USB flash drive. the speaker will automatically enter into USB/TF made, and ‘U/TF’ will be displayed In the upper left corner of the dig Ital display.
2. Hold the ‘REC button to start recording, you will hear a voice when started.
3. Press the ‘REC button to pause or resume recording.
4. Hole the ‘REC’ button again to finish recording.
5. After recording, press the ‘REC’ button to listen to the recording file just recorded.

Record

How to Deleht Recording File;
When playing a recording file. hold the ‘MODE’ button to delete the current recording file.

Repeat

Note; The speaker needs a USB/TF to operate the repeat function.
How to Use Repeat Function: Press the ‘REP/Light’ button to select a loop mode. There are 4 modes: ONE (Single song Cycle), FOLD (Loop the playlist To a folder), RAN (Play all songs randomly), ALL(Loop ell playlist of all folders)

Battery & Battery Indication Light

Battery Important Note:

• For the first time of use. please charge the speaker for up to 8 hours for optimal performance
• Please re-charge the speaker once for a while to keep the battery alive.
• Please use the charging cable in the pockage(adopter is not included, please use a USB port).

Battery Indication Light:

• When the battery indicator light [ ] is flashing, the battery is low and requires charging.
  While the light is flashing, the speaker’s volume will reduce to 70% of the max volume.

• While charging, the battery indicator light will turn RED. The RED light will turn off when the battery is full.

Remote Controller

REC: Recording
Mode: Short press to switch Aux ln-USB-BT-FM
EQ: Press the button to select a EQ mode: normal. rock pop classic.jazz country.

Mute: Press once to mute, press again to unmute.
[ ]: Under Bluetooth Mode, USB drive Mode, short press to play/pause; Under AUX IN mode, single press to mute.
[ ]: Under Bluetooth Mode, USB drive Mode, short press for the previous song function; Under USB drive mode, Press and hold to rewind.
[ ]: Under Bluetooth Mode, USB drive Mode, short press for the previous track function: Under USB drive mode, Press and hold to fast forward.
REP: When ploying with a USB flash drive, single press switches between the current song single loop playback and all song playback.
0-9 number button: When using the USB flash drive playback status, you can quickly select the desired track. For example, if you need to select the 258th song to play, press the number buttons “2”, “5” and “8” In order. After waiting for 1 second. It will automatically switch to the 258th song for playback

Important Notes

• The product can not tolerate high temperatures or domp environments.
• The product shall not expose to water droplets, splashes of water. or rain.
• To avold Injury or electric shock, do not open the speaker.
• To prevent battery explosion, do not throw It into the fire.

Technical Specifications

Free Extended Warranty

Claim Your Extended 1 Year Warranty for Freell

Thank you for purchasing an  product.
Don’t you want to get your free extended warranty?
email us and claim your extended warranty.
Step 1.
Email us your purchase proof (ORDER# from amazon.com) to the fallowing email address support@adjacentaudio.com
Step 2
We will confirm your warranty request within 24 hours. All set!

Customer Support

Please scan this barcode to visit our customer support page.
OR email us at support@adjacentaudfo.com

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>